February 10, 2016

AEDC arc heater facility supports next generation weapon systems

Deidre Ortiz
Arnold AFB, Tenn.

Testing on nosecone materials for a next generation weapons system was recently completed in the Arnold Engineering Development Complex arc heater facility at Arnold Air Force Base, Tenn.

According to 1st Lt. Joey Achenbach, Air Force project manager at AEDC, the test program for San Diego Composites, Inc. (SDC) was performed to screen materials that will likely be used as part of a weapons system that will travel very, very fast at high altitudes.

The SDC nosecone test was conducted in the H2 Test Unit, but Achenbach explained all AEDC arc heaters, H1, H2 and H3, which simulate atmospheric re-entry conditions, are capable of the type of testing conducted on this test object.

“Each has their own focus and benefits,” he said. “H2 is for simulating high velocity at high altitude for aerospace vehicles while H1 and H3 are mainly used for high velocity at low altitude for ICBM ballistic reentry. H3 also operates on a larger scale, at over twice the available power level and mass flow of H1, with higher pressures of up to 160 atmospheres.”

H2 was also used to test re-entry materials for the heat shield on NASA’s Mars rover Curiosity.

Just as the Curiosity test involved research and development of materials, information from the test on the SDC nosecone will help in determining the composition of the new weapon system.

“It will determine which candidate materials will be able to withstand the high energy environment associated with hypersonic velocities,” Achenbach said.

AEDC test teams measured ablation rate, shear response and thermal performance on the Thermal Protection System technologies. Additionally, during this test a mixing/stilling chamber was used to create lower conditions.

“This was unique in that it essentially lowered the total energy of the final air flow by injecting ambient air into the heated air flow produced by the heater,” Achenbach said.

He noted the test marked the first time AEDC performed testing on this particular object.

“It was a preliminary research test but there have been many similar types of tests done before for similar government programs.”

All of this week's top headlines to your email every Friday.


Navy photograph by PO2 Darby Dillon

Unmanned, autonomous technologies tested during first unmanned warrior exercise

Navy photograph by PO2 Darby Dillon Scott Wiltermood, INSITU demonstration team manager, and Bronson Ignacio, an INSITU demonstration team specialist, mount an MQ-27A Scan Eagle unmanned aerial vehicle to a launcher at Benbecul...
Navy photograph by PO2 Liam Kennedy

USS Essex receives high-flying upgrade

Navy photograph by PO2 Liam Kennedy The Wasp-class amphibious assault ship USS Essex (LHD 2) and the San Antonio-class amphibious transport dock ship USS Anchorage (LPD 23) steam alongside off the coast of Hawaii. Essex is the ...
Air Force photograph by Mike Anderson

AEDC National Full-Scale Aerodynamics Complex: One of a kind, ready for future testing

Air Force photograph by Mike Anderson Eric Paciano (left) and Jonathan Lichtwardt (right), both aerospace engineering graduate students at Cal Poly, prepare the AMELIA model airplane for a test. “If you go to SFO (San Fra...