Space & Technology

January 19, 2018
 

NASA picks up where it left off in 2017, tests RS-25 flight controller

nasa-test
NASA engineers picked up this year where they left off in 2017, conducting a certification test of another RS-25 engine flight controller on Jan. 16, 2018, on the A-1 Test Stand at Stennis Space Center near Bay St. Louis, Miss.

The 365-second, full-duration test came a month after the space agency capped a year of RS-25 testing with a flight controller test in mid-December.

A 3D printed part tested in December was tested again. This rocket engine component, a pogo accumulator assembly, is part of an ongoing series of tests with parts made using advanced manufacturing techniques that will make building future engines more affordable.

For this “green run” test, the flight controller was installed on RS-25 developmental engine E0528 and fired just as during an actual launch. Once certified, the flight controller will be removed and installed on a flight engine for use by NASA’s new deep-space rocket, the Space Launch System (SLS). NASA is building SLS as the most powerful rocket in the world, designed to carry humans on the Orion spacecraft and enable missions to the Moon and Mars.

Launch of the SLS rocket will be fueled by four RS-25 engines firing simultaneously to generate 2 million pounds of thrust and working in conjunction with a pair of solid rocket boosters to produce more than 8 million pounds of thrust.

RS-25 engines for the initial SLS flights are former space shuttle main engines, modified to provide the additional power needed by the larger SLS rocket. A key part of that modification is the new flight controller, which works as the RS-25 “brain,” helping the engine communicate with the SLS rocket and providing precision control of engine operation and internal health diagnostics. NASA is testing all RS-25 engines and flight controllers for SLS missions at Stennis.

The initial SLS Exploration Mission-1 (EM-1) will serve as the first test flight for the new rocket and will carry an uncrewed Orion spacecraft. All the engines for this flight have been tested at Stennis and are ready to be attached to the rocket’s core stage being built at NASA’s Michoud Assembly Center in New Orleans. Current engine tests are for controllers for Exploration Mission-2, the first flight that will transport astronauts aboard Orion.

In addition to testing the engines for those flights at Stennis, NASA is preparing the B-2 Test Stand at the center to test the entire SLS core stage with its four engines for EM-1. This “green run” testing will involve installing the flight core stage on the B-2 stand and firing all four RS-25 engines simultaneously, just as during an actual launch. RS-25 tests at Stennis are conducted by a team of NASA, Aerojet Rocketdyne and Syncom Space Services engineers and operators. Aerojet Rocketdyne is the RS-25 prime contractor. Syncom Space Services is the prime contractor for Stennis facilities and operations.




All of this week's top headlines to your email every Friday.


 
 

 

NASA team investigates ultrafast laser machining for multiple spaceflight applications

(Photo Credit: Bill Hrybyk/NASA) Steve Li (left), Frankie Micalizzi (middle), and Robert Lafon (right) are using an ultrafast laser to bond dissimilar materials and etch microscopic channels or waveguides through which light could travel in photonic integrated circuits and laser transmitters. An ultrafast laser that fires pulses of light just 100 millionths of a nanosecond...
 
 
NASA photograph

NASA looking to tiny technology for big payoffs

NASA photograph NASA works with industry partner Nanocomp Technologies Inc. of Merrimack, New Hampshire, to advance manufacturing of carbon nanotube composite materials. On Oct. 29, NASA visited Nanocomp’s facility to discuss...
 
 
nasa-moon

NASA calls for instruments, technologies for delivery to moon

NASA has announced a call for Lunar Surface Instrument and Technology Payloads that will fly to the Moon on commercial lunar landers as early as next year or 2020. The agency is working with U.S. industry and international part...