Air Force

July 6, 2012

Air Force to offer online training site for contracting professionals

by John Scaggs
AFMC Public Affairs

When officials launch the Air Force Contracting Learning Center SharePoint site July 12, it will culminate efforts to provide contracting professionals with a single entry point for continuous learning.

Per DOD Instruction 5000.66, contracting professionals must accumulate 80 continuous learning points every two years. The learning center, which is accessible at https://cs.eis.af.mil/airforcecontracting/training_repository/default.aspx, will facilitate meeting that requirement.

Air Force Materiel Command, whose mission includes providing acquisition management services and logistics support necessary to keep Air Force weapon systems ready for war, is leading this Air Force initiative for an enterprise approach to contracting training. AFMC employs 3,765 contracting professionals, or about 40 percent of the total Air Force contracting workforce.

Creation of the learning center is in support of the Air Force Contracting Strategy Council’s Goal 2, which involves “aggressively recruiting, developing, retaining, and supporting a trained and capable Air Force Contracting corps, ready to meet the Air Force and Joint Contracting mission.” Goal 2 team members included participants from Air Force Contracting, five Air Force Major Commands, and the Air Force Personnel Center.

The learning center also supports AFMC’s “Year of Continuing Education” initiative.

According to Col. Roger Westermeyer, AFMC Contracting deputy director, the learning center provides numerous advantages and opportunities.

“Content will be viewable in three ways: by process, Federal Acquisition Regulation part, or topic,” the colonel said. “Process view aligns with the new Contract Information Management System. This view will provide buyers ready access to learning material at their desktop computer while buyers are in a particular procurement phase. The concept is to instantly connect buyers to knowledge or subject matter experts while buyers are performing their jobs.

“The learning center will allow people at all levels, from unit training monitors to senior contracting officials, to examine existing training materials and extract relevant information instead of developing new content,” Westermeyer said. “This will eliminate the need for local units to expend resources developing training because the learning center will provide it for them.”

Mary Petkoff, a procurement analyst in Headquarters AFMC’s Contracting Processes Management Division, added that consolidation of material onto the learning center will provide more consistent and standardized contracting training across the Air Force.

“More than 70 contracting organizations throughout the Air Force, as well as MAJCOMs and other organizations, are sourcing, developing and maintaining training products,” Petkoff said. “Additionally, people are maintaining more than 20 training repositories and/or portals, many of which reside in Air Force Knowledge Now, which will be eliminated. The learning center will reduce redundancy and enhance standardization and quality of contracting training materials.

“Content owners will be responsible for maintaining and updating material to ensure information is current,” Petkoff continued. “While many content owners for topics appearing on the site will reside in AFMC, the learning center currently has content owners at SAF/AQCP, Air Force Logistics (AF/A4), and Air Force Space Command. Efforts to add knowledgeable content owners from across the Air Force continue.

“Related to this is the concept that the learning center was set up to link to source documents, so that when a source document is updated, that information is updated on the learning center,” Petkoff said.

More content will be migrated to the learning center through incremental phases, which is often referred to as spiral development. For instance, at the initial rollout the contingency contracting section of the learning center will contain material on the mobilization phase of deployment. Additional training material will be added later for the buildup, sustainment, and redeployment phases.

According to Westermeyer, the need for a centralized learning center arose from an increased demand for training while at the same time resources to develop and maintain training material have decreased.

“About 40 percent of the Air Force’s contracting workforce has less than five years of experience,” the colonel said. “Contracting staffs at all levels throughout the Air Force are shrinking and we face the potential of more budget and personnel cuts. By consolidating contracting training content into one location we can be more efficient and effective in providing quality standardized training content to the workforce.”

AFMC’s interest in leading the effort to create the learning center escalated following the command’s reorganization announcement in November 2011. AFMC is consolidating its centers from 12 to five as part of AFMC’s response to a Department of Defense challenge to find efficiencies and save tax dollars. AFMC officials say that by reducing and consolidating overhead, the command will improve the way it accomplishes its diverse mission and will provide better support to the warfighter.

“As we move forward, we must train and develop our people to fully implement the Better Buying Power initiatives,” Westermeyer said. “This requires a firm understanding of contracting processes and principles as well as industry business practices. The Air Force Contracting Learning Center will help us get there.”




All of this week's top headlines to your email every Friday.


 
 

 
afmc-q-and-a

Lean thinking, process improvement highlight Busch’s time at AFMC

During the last 16 years and six assignments in Air Force Materiel Command, Vice Commander Lt. Gen. Andrew Busch was challenged to find new methods to operate more efficiently in one of the most complex and diverse commands tha...
 
 
Air Force photograph by Bill Orndorff

3-D printing saves maintainers money at Hill

Air Force photograph by Bill Orndorff An F-16 wing attachment, molded from plastic in a 3-D printer, was used as a prototype before being machined in metal. The 309th Maintenance Support Group at Hill Air Force Base, Utah, is u...
 
 

New personal property allotment rule implemented to protect Airmen

Defense Secretary Chuck Hagel recently directed a policy change in paycheck allotments which will prohibit service members from allotting pay to buy, lease or rent personal property. The prohibition includes allotments for the purchase or finance of vehicles, such as automobiles, motorcycles and boats; appliances or household goods, such as washers, dryers and furniture; electronics...
 

 

AF realigns missions to enhance nuclear support

In response to a directive from the Secretary of the Air Force and Chief of Staff of the Air Force, the 377th Air Base Wing in Albuquerque, N.M., will report to Air Force Global Strike Command, and the Air Force Nuclear Weapons Center will reorganize, combining the AFNWC commander and Air Force Program Executive Officer...
 
 

Air Force looks at innovative acquisition processes

With new technologies rapidly coming to the forefront of the global stage, remaining the world’s greatest air force comes at an escalating cost, making responsible spending and cost-cutting initiatives high priorities for Air Force leadership. The Air Force Office of Acquisitions is partnering with industry to realize some of these initiatives and help propel the...
 
 
Air Force photograph by Rebecca Amber

Airman, screenwriter says follow your dreams

Air Force photograph by Rebecca Amber Capt. Eric Koenig, 412th Aerospace Medicine Squadron dentist, consults with a patient at the Edwards AFB Dental Office. This past Veterans Day, Capt. Eric Koenig, 412th Aerospace Medicine S...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>