March 26, 2012

Northrop Grumman continues progress on space telescope spacecraft

Written by: Staff
More articles by »

REDONDO BEACH, Calif. – An important spacecraft component that will enable NASA’s James Webb Space Telescope to deliver clear images passed its Critical Design Review at Northrop Grumman.

Now cleared for manufacturing, it represents an important step in the spacecraft’s progress.

Acting as a suspension system, the component is a spider-shaped vibration isolator with four flexible tubes made of graphite composite. They are lined with material that is designed to absorb vibrations. The isolator is seated between the spacecraft and the large tower that supports the primary mirror.

“The spacecraft has multiple mechanisms that cause vibration, such as spinning reaction wheels and the compressor on the cryocooler for the Mid-Infrared Instrument,” explains Andy Cohen, Webb Spacecraft manager, Northrop Grumman Aerospace Systems. “The key to precision alignment and vibration suppression is that it keeps the telescope in the shadow of the sunshield, where it must stay to operate properly.”

In space, there is no atmosphere to slow vibrations down, so they last longer. In addition, unlike warm components, cold components are more susceptible to vibrations, so it is important to isolate the cold telescope and instruments from this type of movement. The isolator’s job is to suppress vibration from the spacecraft so that the mirror remains still and captures clear images, similar to the way a camera will take clear photos as long as it’s held steady.

With this review recently completed, the spacecraft and its components are moving forward rapidly to support a launch in late 2018.

Northrop Grumman is the prime contractor responsible for designing and developing the telescope for NASA’s Goddard Space Flight Center, Greenbelt, Md.

Successor to the Hubble Space Telescope, the James Webb Space Telescope is the world’s next-generation space observatory. It will be the most powerful space telescope ever built. Webb will observe the most distant objects in the universe, provide images of the very first galaxies ever formed and study planets around distant stars. The Webb Telescope is a joint project of NASA, the European Space Agency and the Canadian Space Agency.


All of this week's top headlines to your email every Friday.



Near Infrared Camera Integrated into space telescope

Lockheed Martin and the University of Arizona have delivered the primary imaging instrument of the James Webb Space Telescope to NASA’s Goddard Space Flight Center. The new Near Infrared Camera, or NIRCam, has been successfully integrated within the heart of the telescope, known as the Integrated Science Instrument Module. The integration completes the suite of...
Air Force photograph by SSgt. Carlin Leslie

Space superiority remains vital to national security

Air Force photograph by SSgt. Carlin Leslie Gen. William Shelton reviews his notes before testifying April 3, 2014, in front of the House Armed Services Committee subcommittee on strategic forces, in Washington, D.C. Shelton is...

Fifth Boeing GPS IIF satellite joins Global Positioning System

EL SEGUNDO, Calif. – The accuracy of the Global Positioning System has been improved with the recent handover of a fifth Boeing GPS IIF satellite to the U.S. Air Force. The newest addition to the GPS constellation increases the precision of position, navigation and timing data sent to users around the world. The satellite was...


Fourth AEHF protected communications satellite begins integration months ahead of schedule

The fourth Advanced Extremely High Frequency satellite produced by Lockheed Martin is taking shape after early deliveries of its payload and propulsion core. AEHF-4, expected to launch in 2017, will enable the constellation to ...
Northrop Grumman photograph by Alex Evers

Northrop Grumman ships payload module two months early for AEHF satellite

Northrop Grumman photograph by Alex Evers Integration of the payload module for the fourth Advanced Extremely High Frequency (AEHF) protected communications satellite underway at Northrop Grumman’s facilities in Redondo B...

Boeing realigns engineering to enhance customer Support

Boeing announced April 10 it is centralizing customer support for in-service airplanes at its Boeing Commercial Airplanes Engineering Design Center in Southern California, as the company continues to focus on increasing competitiveness while enabling continued growth of the global airline industry. “We’re creating a single location for customer support at the Southern California des...


Be the first to comment!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>