Business

March 15, 2013

Northrop Grumman, ATK complete primary mirror backplane support wing assemblies for Webb telescope

Technicians complete the primary mirror backplane support structure wing assemblies for NASA’s James Webb Space Telescope at ATK’s Space Components facility in Magna, Utah.

REDONDO BEACH, Calif. – Northrop Grumman and teammate ATK have completed the fabrication of the primary mirror backplane support structure wing assemblies for NASA’s James Webb Space Telescope. Northrop Grumman is under contract to NASA’s Goddard Space Flight Center in Greenbelt, Md., for the design and development of the Webb Telescope’s optics, sunshield and spacecraft.

The primary mirror backplane supports the telescope’s beryllium mirrors, instruments and other elements during ground test operations and launch. It holds the 18-segment, 21-foot-diameter primary mirror nearly motionless while the telescope is peering into deep space. The deployable wing sections complete the backplane structure while providing thermal stability. Their unique folding design permits the telescope to fit in the five-meter fairing of the launch vehicle.

“Our ATK teammates have met unprecedented thermal stability requirements,” said Charlie Atkinson, deputy Webb Optical Telescope Element manager for Northrop Grumman. “The team has done a commendable job of completing the PMBSS wing assemblies.”

Measuring approximately 24 by 21 feet, and weighing more than 2,000 pounds, the primary mirror backplane support structure which includes the wing assemblies as well as the center section that ATK completed in February 2012 ñmust meet unprecedented thermal stability requirements. While the telescope is operating at a range of extremely cold temperatures, from -406 to -343 degrees Fahrenheit, the backplane must not vary more than 38 nanometers (approximately 1/1,000 the diameter of a human hair). For reference, if the mirror were enlarged to span from Los Angeles to New York City, the tolerance for error would be less than 1 inch.

The wing assemblies of the Webb Telescope’s primary mirror backplane support structure were designed and fabricated and will be tested at ATK facilities in Magna, Utah. ATK designed and built the 900 composite parts of the wing assembly using lightweight graphite materials and advanced fabrication techniques. The composite parts attach to precision metallic fittings that provide interfaces with the other elements of the observatory.

“The completion of the backplane wing assemblies continues to demonstrate state-of-the-art engineering and fabrication supporting this great NASA program,” said Bob Hellekson, ATK’s Webb Telescope program manager. “We are proud to be a partner in building this amazing telescope.”

The James Webb Space Telescope is the world’s next-generation space observatory and successor to the Hubble Space Telescope. The most powerful space telescope ever built, the Webb Telescope will observe the most distant objects in the universe, provide images of the first galaxies formed and see unexplored planets around distant stars. The Webb Telescope is a joint project of NASA, the European Space Agency and the Canadian Space Agency.




All of this week's top headlines to your email every Friday.


 
 

 

Near Infrared Camera Integrated into space telescope

Lockheed Martin and the University of Arizona have delivered the primary imaging instrument of the James Webb Space Telescope to NASA’s Goddard Space Flight Center. The new Near Infrared Camera, or NIRCam, has been successfully integrated within the heart of the telescope, known as the Integrated Science Instrument Module. The integration completes the suite of...
 
 
Air Force photograph by SSgt. Carlin Leslie

Space superiority remains vital to national security

Air Force photograph by SSgt. Carlin Leslie Gen. William Shelton reviews his notes before testifying April 3, 2014, in front of the House Armed Services Committee subcommittee on strategic forces, in Washington, D.C. Shelton is...
 
 

Fifth Boeing GPS IIF satellite joins Global Positioning System

EL SEGUNDO, Calif. – The accuracy of the Global Positioning System has been improved with the recent handover of a fifth Boeing GPS IIF satellite to the U.S. Air Force. The newest addition to the GPS constellation increases the precision of position, navigation and timing data sent to users around the world. The satellite was...
 

 
web_LM-AEHF

Fourth AEHF protected communications satellite begins integration months ahead of schedule

The fourth Advanced Extremely High Frequency satellite produced by Lockheed Martin is taking shape after early deliveries of its payload and propulsion core. AEHF-4, expected to launch in 2017, will enable the constellation to ...
 
 
Northrop Grumman photograph by Alex Evers

Northrop Grumman ships payload module two months early for AEHF satellite

Northrop Grumman photograph by Alex Evers Integration of the payload module for the fourth Advanced Extremely High Frequency (AEHF) protected communications satellite underway at Northrop Grumman’s facilities in Redondo B...
 
 

Boeing realigns engineering to enhance customer Support

Boeing announced April 10 it is centralizing customer support for in-service airplanes at its Boeing Commercial Airplanes Engineering Design Center in Southern California, as the company continues to focus on increasing competitiveness while enabling continued growth of the global airline industry. “We’re creating a single location for customer support at the Southern California des...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Directory powered by Business Directory Plugin