Local

February 14, 2014

EOD clears range

Staff Sgt. Adam Clement, 56th Civil Engineer Squadron Explosive Ordnance Disposal team leader, inspects a blast crater Jan. 30 at the Barry M. Goldwater Range. EOD finds unexploded ordnance, marks it off and blows it up.

 
After a long day of dropping bombs and firing missiles at targets, hard work and caution are needed to clean up the Barry M. Goldwater Range.

It is the job of the 56th Civil Engineer Squadron to clear the range so maintenance personnel can repopulate it with targets. They remove hazards such as fragments from bombs, scrap metal from targets and unexploded duds.

Explosive Ordnance Disposal Airmen, accompanied by Chief Master Sgt. John Mazza, 56th Fighter Wing command chief, performed an annual clearance Jan. 30 of the BMGR and surrounding areas by searching for unexploded bombs or missiles at the high explosive hill and performing sweep line runs at the South Tactical range.

“Because we clear the range of explosive hazards for the safety of the range management office maintenance unit, the maintenance personnel can then either repair or replace targets for the pilots to train on,” said Staff Sgt. Stephen Alvarez, 56th CES EOD team leader.

Chief Master Sgt. John Mazza, 56th Fighter Wing command chief, watches the 56th CES Explosive Ordnance Disposal team explode undetonated ordnance at the high explosives hill at the Barry M. Goldwater Range. The EOD unit clears the range for maintenance to replace the targets for pilot training.

At the HE hill, pilots fly over and drop live bombs that sometimes can be duds. To ensure duds are disposed of properly, EOD members are sent in to identify the ordnance, mark it off with flagging ribbon and place C-4 onto the ordnance. After placing C-4 onto the ordnance, EOD backs away to the safe zone where they detonate the duds and any missiles.

“Due to multiple detonations with large radiuses, safety becomes a big issue,” said Tech. Sgt. Charles Cowart, 56th CES EOD team leader. “It also gives us a chance to train on a large scale demolition with live munitions.”

In addition to clearing out the HE hill, EOD performed sweep lines at South Tactical range. Trucks lined up and EOD Airmen scouted the area for scrap metals and other debris that could harm personnel.

Staff Sgts. Zachary Holschuh and Jose Hernandez, 56th CES EOD team leaders, unload exploding cutting tape in preparation for the day’s work. The ECT is used to cut through empty and concrete ordnance.

“EOD forces accomplish the mission using safe disposal procedures developed to counter U.S., Allied, or enemy explosive ordnance discovered in a hazardous condition due to accidents or other circumstances,” said Chief Master Sgt. William Ewing, 56th CES EOD flight chief. “EOD forces must be capable of countering threats from weapons of mass destruction, conventional and chemical unexploded ordnance and improvised explosive devices that may be from enemy or friendly forces.”

As a former CE Airman, Mazza said being in the field with the EOD Airmen reminded him of the pride he has in the career field.

“I had a great time spending the day with EOD Airmen,” he said. “What they bring to the fight is immeasurable. Clearing and rendering the BMGR safe is vital to the 56th Fighter Wing’s mission. This was also a reunion of sorts, since I was the squadron chief for a couple of these guys a few years back.”
 

Staff Sgt. Zachary Holschuh, left, 56th Civil Engineer Squadron Explosive Ordnance Disposal team leader, and Tech. Sgt. Christopher Mueller, 56th CES EOD team leader, lay out explosive cutting tape across undetonated ordnance Jan. 30 at the BMGR. The ECT is used to cut through empty and concrete ordnance.

 

Senior Airman Seth Huff, 56th CES EOD team member, organizes dud ordnance using a skip loader. Once they are placed in a bomb line, they’re cut open with ECT to expose the inside for inspection.




All of this week's top headlines to your email every Friday.


 
 

 

Air Force News – August 29, 2014

New Mexico Airmen from every specialty completed a four-day deployment exercise Aug. 20 at Holloman Air Force Base as part of the Air Force Commander’s Inspection Program. Air Force’s CIP was rolled out 2013 and specifically focuses on the bases’ ability to rapidly deploy combat-ready Airmen and equipment worldwide. Romania Mihail Kogalniceanu Air Base started...
 
 

People First – August 29, 2014

Editor’s Note: The “People First” section is compiled from information from the Air Force Personnel Center, TRICARE, 56th Force Support Squadron, Airman and Family Readiness Flight, Veterans Affairs, the civilian personnel office and armed forces news services. For the complete story, go to the web address listed at the end of the story. Call for...
 
 

Dollars and Sense

Have you contributed to the Thrift Savings Program? Are you now considering taking a TSP loan? Before you do, consider the total costs of the loan and the impact upon your future benefits. TSP loans borrow from your contributions and accrued earnings. Additionally, you are charged a $50 loan fee that is taken from your...
 

 
Courtesy photo

Chaplain’s thoughts …

Courtesy photo C.S. Lewis C.S. Lewis has a character in one of his books who speaks of the Law of Undulation. The law is simply this; life is marked by ups and downs. The present unpleasant circumstance that may be marring your...
 
 
DT-140822-F-NQ441-010CROPPED

New SNCOs head back to school

A Luke Honor Guardsman presents the Prisoner of War and Missing in Action table Aug. 22 during the Senior NCO Professional Development Course in the Club Five Six Ballroom at Luke Air Force Base. The table is a reminder of thos...
 
 
5-140821-F-LC301-009

Avoiding hazards, using right equipment good fall prevention

As summer comes to a close and the fall season looms, relief from heat is right around the corner, and working inside or outdoors is a welcomed idea. As the heat dies down and fall rolls in, the chores left abandoned during sum...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>


Directory powered by Business Directory Plugin