Local

June 27, 2014

How’s your jet engine running?

Tags:
Senior Airman MARCY COPELAND
56th Fighter Wing Public Affairs

Andre Gandy, 56th CMS jet engine mechanic, installs an augmenter L-flange bracket on an F-16 Fighting Falcon engine. CMS is responsible for scheduled maintenance of aircraft propulsion, avionics, low altitude navigation and targeting infrared for night pods, pneudraulics, electrical-environmental, egress and fuel systems used by more than 190 organizations on Luke and throughout the Southwest.

With a dry weight of 3,218 pounds, a length of 191.15 inches, a diameter of 44.60 inches and a max fuel flow of 49,964 pounds per hour, the F-16 Fighting Falcon F100-220 engine is a marvel to see when firing during take-off but jaw-dropping when viewed by itself awaiting maintenance.

This massive engine is housed in the body of the F-16, which is the main aircraft flown at Luke Air Force Base. Luke is an Air Education and Training Command base, so pilots learning to fly receive their training here, but who makes that engine turn over every time a pilot “turns the key” in the cockpit? The 56th Component Maintenance Squadron is who.

The 56th CMS is responsible for the inspection, repair and scheduled maintenance of aircraft propulsion, avionics, low altitude navigation and targeting infrared for night pods, pneudraulics, electrical-environmental, egress and fuel systems used by more than 190 organizations on Luke and throughout the southwestern part of the U.S. The 56th CMS is broken into four flights: propulsion, accessories, avionics, test and measurement and diagnostic equipment.

“I believe that working in the 56th CMS with the four separate flights makes everything a lot easier,” said Senior Airman Sean Caudill, 56th CMS Propulsion Flight programs monitor. “Not everything is relying on a single point for the mission to be accomplished. With all of us working in cohesion the mission is able to be completed in a more effective and timely manner.”

When it comes to repairs, the majority are completed in-house by the jet engine intermediate maintenance flight also known as the propulsion flight. Each repairing asset is worth $3.2 million dollars and that is money saved every time something can be fixed on base. When a component inside the core module cannot be serviced, it is sent out for repairs to Tinker AFB, Oklahoma.

Airman 1st Class Joseph Nunez, 56th CMS, takes an electronic measurement of an engine core. Each F100-220 engine costs an estimated $3.2 million in repairs done at Luke, saving the Air Force money every year by not having to ship them out. The Jet Engine Intermediate Maintenance flight works 24 hours a day with 28 people per shift with crews of four to five people to produce one engine every 240 hours.

The JEIM works 24 hours a day with 28 people per shift with crews of four to five people. The 56th CMS can complete a disassembly and reassembly of an engine within 240 hours of receiving it. The crews work with each other day in and day out with civilians working alongside Airmen to complete the squadron’s mission.

“What I like most is being able to work with the younger people,” said Andrew Angulo, 56th CMS jet engine technician. “I get to see them from day one and when they leave three or four years later, I get to see how much they have developed. That is the best part of the job, being able to mentor and hopefully you pass on something good.”

Even though the shifts are long and repairing the same thing can become redundant, a sense of pride comes from hearing a jet roaring overhead and knowing that a member of the 56th CMS worked hard and carefully to ensure the safety of the pilot and the machine they operate.

“For me, when my friends who are not military hear an F-16 go over, they say ‘Hey man, did you work on that?’” said Airman 1st Class Joseph Nunez, 56th CMS aerospace propulsion journeyman. “‘Yea, probably,’ I respond. It’s just the fact that you can say, ‘Yup, I worked on the billion dollar aircraft flying over your head right now.’ It’s just a great thing to boast about and be proud of.”




All of this week's top headlines to your email every Friday.


 
 

 
Pg-1-photo-150612-F-EC705-058

Emerald Knights go out with bang

Emerald Knights watch a burning piano during the 308th Fighter Squadron inactivation party June 12 at Luke Air Force Base. The 308th FS and aircraft maintenance unit have packed up and are transitioning to the 314th FS standing...
 
 
2_lemery_d2

Respect — want, earn, give, but don’t lose it

Lt. Col. David Lemery We all want it, some earn it, some are given it and some lose it. Respect can be defined as a feeling of deep admiration for someone or something elicited by their abilities, qualities or achievements. As ...
 
 

Solve problems at lowest level

Crucial in our Air Force environment today is having the proper tools and skillsets available to deal with problems. There is literally something new almost every single day that will invoke problem solving skills. When faced with a problem, an important mindset to have is to resolve the issue at the lowest possible level. Some...
 

 

News Briefs June 26, 2015

607th ACS change of command Lt. Col. Charles Jones will relinquish command of the 607th Air Control Squadron to Lt. Col. Jerald Canny in a ceremony at 8 a.m. Wednesday in Hangar 999.   CMS change of command Maj. Scott Hall will relinquish command of the 56th Component Maintenance Squadron to Maj. Anthony Sutton in...
 
 

Fighting Falcons arrive at Holloman

Courtesy photo Six F-16 Fighting Falcons from the 308th Fighter Squadron at Luke Air Force Base arrive in formation June 16 at Holloman Air Force Base, New Mexico. The 308th FS has inactivated and the soon to be activated 314th FS assumes the 308th FS mission of training F-16 pilots as a 56th Fighter Wing...
 
 
5_Courtesy-photo

Monsoon season blows in storms, rain, dust

Courtesy photo Arizona is known for being sunny with clear skies for the majority of the year, but every year “it” happens. As the clouds roll in, the sky darkens with thunderbolts streaming overhead, and the first drops of...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>