Defense

March 27, 2012

Army sees 10,000 CROWS manufactured

Tags:

Army photograph by Sgt. Derec Pierson
Soldiers in an MRAP with CROWS atop finish a route clearance patrol with the 57th Sappers (Airborne), 27th Engineering Battalion, and pull into the Combat Outpost Nerkh in Wardak province, Afghanistan, June 9.

The Army is marking the manufacture of the 10,000th M153 Common Remotely Operated Weapons Station, known as CROWS.

The CROWS system allows a weapon such as the M2 .50-caliber machine gun to be mounted atop a vehicle, such as the Humvee, and be targeted and fired remotely from inside the vehicle. This allows a soldier operator to stay safely inside the vehicle.

Army officials from PEO Soldier, along with Pennsylvania Congressman Mark Critz and Norwegian Defense AttachÈ Rear Admiral Trond Grytting attended a March 26 event at Kongsberg Protech Systems in Johnstown, Penn.

“The growth of this program can be primarily attributed to one thing – soldier demand,” said Mary Miller, deputy PEO Soldier. “CROWS continues to prove itself as a significant force multiplier on the battlefield with tremendous opportunities for further development.”

The Army has fielded thousands of CROWS II systems in support of soldiers since 2007 across the theater of operations on more than a dozen vehicle platforms. The program reached a major milestone in February when the Army classified the CROWS program with ACAT I status, recognizing the CROWS among the elite levels of the DOD’s major defense acquisition programs.

CROWS is a turret system that provides soldiers the ability to employ cameras, sensors, and weapons from inside the protection of an armored vehicle. CROWS provides fire superiority for the soldier as a result of its ability to turn “area weapons,” such as the M2 .50 caliber machine gun into on-the-move precision engagement weapons.

The Army launched its third CROWS competition Jan. 9. The new contract will enable the Army to procure additional CROWS systems; maintain current and new systems with repairs and spare parts; and secure engineering services needed for product improvements and field service support. The contract competition closed March 23 and the Army anticipates awarding a contract in the fall of 2012.

 

Expanding CROWS capacity

Program engineers and soldiers alike continue to expand upon the range of applications possible for the CROWS platform.

One example is the fielding of one of the Army’s “Greatest Inventions” for 2010, the “Green Eyes” Escalation of Force Kit. The non-lethal green laser offers soldiers an interim step in the escalation of force by temporarily disrupting vision and sending a warning signal across language and cultural barriers to keep innocent people from entering into harm’s way.

The Army’s product manager for crew served weapons incorporated soldier feedback from an earlier operational assessment to improve the fit and function of a second generation of escalation of force kits.

Soldiers recently began to look for ways to leverage CROWS’ target identification and day/night surveillance capabilities in support of force protection. Units requested fixed site mounting kits to install CROWS in guard towers to better monitor areas and target threats remotely from inside a protected structure. PM CSW began installing fixed sites in January 2012. Fielding teams plan to install systems at various combat outposts and forward operating bases throughout Afghanistan in 2012.

Other accessory upgrades of interest include a secondary screen to assist in verifying enemy combatants prior to engaging with lethal force, enhanced sensor capability, additional weapon integrations such as Javelin, and integrated 360-degree situational awareness.

The Maneuver Support Center of Excellence, which acts as the proponent for the CROWS program, is currently developing a new requirement that will determine what the future CROWS will provide in terms of capability and characteristics. The next chapter for CROWS will be written in the coming years as the proponent’s new requirement is staffed, approved, and executed.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>