Business

April 18, 2012

Honeywell Green Jet Fuel to power flights using new biofeedstock

UOP LLC, a Honeywell company, announced April 18 that Honeywell Green Jet Fuel will be used for the world’s first comprehensive test program using a new biofeedstock specifically designed for biofuel production.

The test flights, to be done in Canada with the National Research Council of Canada and Agrisoma Biosciences Inc., will also feature in-flight collection of emissions by a trailing aircraft, allowing for later evaluation of the Green Jet Fuel’s emissions performance.

The program will also test blends of Honeywell Green Jet Fuel at higher ratios than previous demonstration flights, which have been conducted using a 50/50 ratio of biofuel and jet fuel produced from petroleum.

“This is a unique program of test flights, given that we are using a new feedstock to produce the Honeywell Green Jet Fuel, and it will be used in higher ratio than before,” said Jim Rekoske, vice president and general manager of the Honeywell UOP’s Renewable Energy and Chemicals business unit. “Additionally, the collection of in-flight emission will allow for further verification of the superior environmental performance of Honeywell Green Jet Fuel.”

The series of flights, expected to take place this month, will use Honeywell Green Jet Fuel produced from Resonance Energy Feedstock, a new non-food, industrial oilseed crop produced by Ottawa-based Agrisoma. The feedstock is derived from Brassica carinata and is optimized for use as a biofuel feedstock. The crop is also uniquely suited for production in semi-arid areas that are unsuitable for food oilseed production, meaning it will not compete with food crops for land resources.

The Resonance crop, used to produce Honeywell Green Jet Fuel for the flights, was grown in Kincaid, Saskatchewan, in the summer of 2011.

The flights will be conducted on a modified Falcon 20 twin-engine jet. Honeywell Green Jet Fuel is to be blended beyond the 50 percent level used in past flights, which is also the level approved by ASTM, the worldwide standards body that approved commercial use of Honeywell Green Jet Fuel last year.

The flights will also feature a trailing aircraft, which will collect emissions from the Falcon aircraft while in flight for later evaluation. Previous evaluations of Honeywell Green Jet have found a 60-85 percent reduction in greenhouse gas emissions relative to petroleum-based fuels.

Honeywell UOP’s Renewable Jet Fuel Process technology was originally developed in 2007 under a contract from the U.S. Defense Advanced Research Projects Agency to produce renewable military jet fuel for the U.S. military. The process technology is fully compatible with existing hydroprocessing technology commonly used in today’s refineries to produce transportation fuels. It produces an aviation biofuel that can be blended seamlessly with petroleum-based fuel. When used as part of as much as a 50 percent blend with petroleum-derived jet fuel, Green Jet Fuel is a drop-in replacement that requires no changes to the aircraft technology and meets all critical specifications for flight.

Honeywell’s UOP, a recognized global leader in process technology to convert petroleum feedstocks to fuels and chemicals, is developing a range of processes to produce green fuels from natural feedstocks. In addition to its Renewable Jet Fuel Process technology, the company has commercialized the UOP/Eni Ecofining process to produce Honeywell Green Diesel Fuel from biological feedstocks. It has also a joint venture with Ensyn Corp. in Envergent Technologies LLC, which offers pyrolysis technology for the production of renewable heat, power and transportation fuels.

 




All of this week's top headlines to your email every Friday.


 
 

 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 
 

Boeing breaks ground in St. Louis for new composites center

Boeing Dec. 16 began construction in St. Louis of a new 367,000-square-foot facility in which it will build parts for the newest member of its 777 commercial airplanes family, the 777X.  About 700 new jobs will be created for the 777X work. Construction should be complete in 2016, with work on 777X wing and empennage...
 

 

Raytheon, Bell conduct first missile launch from V-22

Raytheon and Bell Helicopter have completed two successful launches of the Griffin B missile from a Bell Boeing V-22 Osprey multi-mission aircraft at Yuma Proving Ground, Ariz. As an industry funded effort with Bell’s Xworx, Raytheon demonstrated the simplicity of integrating the Griffin B missile onto the V-22 platform. “This is the first time a...
 
 

Raytheon gallium nitride technology validated for space applications

Satellites may soon carry Raytheon’s Gallium Nitride technology into Earth orbit. Raytheon has successfully validated its GaN Monolithic Microwave Integrated Circuit technology for use in space-bound equipment. Raytheon GaN MMICs, fabricated at its Andover, Massachusetts foundry, demonstrated the radiation hardness required for space through Single Event Burn-out and Total Ionizing Dose t...
 
 
Air Force photograph by A1C Alexander Guerrero

317th AG delivers during massive JFE

Air Force photograph by A1C Alexander Guerrero Eleven C-130H Herculesí from various Air National Guard units and thirteen C-130J Super Herculesí from the 317th Airlift Group at Dyess Air Force Base, Texas, prepare to take off...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>