Business

May 1, 2012

Northrop Grumman demonstrates compact, rugged solid-state laser for military applications

Northrop Grumman photograph
Photos show damage to outer cover of representative cruise missile threat from Gamma.

REDONDO BEACH, Calif. – Northrop Grumman has test fired the first product in its next-generation FIRESTRIKEâ„¢ family of high-energy, solid-state lasers that meet goals for size and weight reduction and ruggedization for operational applications.

The tests, conducted in the company’s Redondo Beach laboratory, demonstrated that the laser could burn through the skin and critical components of a target drone used to simulate anti-ship cruise missile threats to U.S. Navy ships.

The laser, called Gamma, uses a “slab” architecture similar to previous Northrop Grumman high-power lasers. It operated at 13.3 kilowatts for a number of shots over a total of 1.5 hours with stable performance and a beam quality that exceeded design goals, completing the initial phase of trials.

Photos show damage to outer cover of representative cruise missile threat from Gamma.

“We previously announced the design for a product called FIRESTRIKEâ„¢ that builds on our heritage of record-breaking, high-energy, solid-state lasers. Since that time we’ve invested our internal funds to fabricate, integrate and test a demonstration prototype of the FIRESTRIKEâ„¢ laser that we call Gamma,” said Steve Hixson, vice president of advanced concepts, space and directed energy systems for Northrop Grumman’s Aerospace Systems sector.

“Gamma has equaled or exceeded the performance we achieved in previous slab lasers, but the real advancement here is in packaging and ruggedization for operations in real-world military platforms,” he added. The term “slab laser” refers to a class of high-power, solid-state lasers with a gain medium, or source of atoms that emit light, in the form of a slab about the size of a microscope slide.

“The Gamma demonstrator is built in a form factor that implements the size and weight reduction goals of the FIRESTRIKEâ„¢ design, which cuts the weight of the finished laser chain to 500 pounds and shrinks the volume to 23 inches by 40 inches by 12 inches, or about the size of two countertop microwave ovens,” said Dan Wildt, vice president, directed energy systems, Northrop Grumman Aerospace Systems.

“This laser has also been ruggedized to demonstrate how robust operational FIRESTRIKEâ„¢ lasers can be,” Wildt said. “Our company has more than 50,000 lower power laser devices in operation with the Defense Department. “We applied lessons from those systems to be sure this laser will be able to survive in real-world operational environments and keep operating reliably.”

“Gamma implements a significant reduction in the number of internal optical components, while new mounting techniques eliminate sensitivity to vibrations. Key portions of the Gamma laser have already been subjected to vibration, shock and thermal testing to validate that these improvements have achieved design goals,” said Wildt.

The Gamma demonstrator is a single “chain” or building block that is designed to be combined with other chains to create laser systems of greater power, as was demonstrated in Northrop Grumman’s 105 kilowatt Joint High Power Solid State Laser.

The Gamma laser.

“This hallmark for company lasers allows them to be combined coherently, meaning they retain their good beam quality, or the ability to focus energy at long ranges, even as more power is added,” Wildt explained. “The Gamma laser was tested at a beam quality of 1.4, which beat the design goal of 1.5, and we expect it to keep improving. A perfect beam quality is 1. Owing to its excellent beam quality, the 13.3 kilowatt Gamma is also brighter than its design goal, meaning it can put more power on target at range.”

The lethality testing used a single Gamma chain at short distance in a way that simulated the effects that a laser weapon of several chains aboard a Navy ship could achieve at a range of several miles. “We validated that the laser could produce the amount of energy we predicted, and that the energy would have the effect on the target that we predicted,” said Wildt.

The components used in the test included the skin of a surplus BQM-74 drone and other parts configured to represent critical internal components. The BQM-74 was formerly produced by Northrop Grumman for the Navy as a representative cruise missile threat and used for testing defensive systems.

“The FIRESTRIKEâ„¢ laser, announced in 2008, forms the backbone near-term laser weapon systems from Northrop Grumman. Combined with advanced electro optical and/or infrared sensors, FIRESTRIKEâ„¢ line replaceable units and their subsystems can provide military services with active defense, offensive precision strike and enhanced situational awareness capabilities, all in the same weapon system,” Wildt said.

 




All of this week's top headlines to your email every Friday.


 
 

 

Headlines October 20, 2014

News: Navy grounds ‘Top Guns’ - The F/A-18s needs spare parts and in too many cases they’re being taken from brand new jets. This is a risk to national security and pilots’ lives.   Business: Boeing seeks revised schedule for U.S. aerial tanker - Boeing is revising its master schedule for developing the new U.S. Air Force...
 
 

News Briefs October 20, 2014

New military medical team to help with Ebola in U.S. Defense Secretary Chuck Hagel has ordered the military to prepare and train a 30-member medical support team that could provide short-term help to civilian health professionals if there are more Ebola cases in the United States. His spokesman, Rear Adm. John Kirby, says the team...
 
 

Dragon ‘fires up’ for flight

The Air Force and NATO are undergoing a cooperative development effort to upgrade the avionics and cockpit displays of AWACS aircraft belonging to the 552nd Air Control Wing at Tinker Air Force Base, Okla., and the NATO E-3 Sentrys from Geilenkirchen, Germany. The Diminishing Manufacturing Sources Replacement of Avionics for Global Operations and Navigation, otherwise...
 

 
Boeing photographs

Boeing-built X-37B successfully completes third flight

Unmanned spacecraft concludes record-setting 674-day mission   Boeing photograph A third mission of the Boeing-built X-37B Orbital Test Vehicle was completed on Oct. 17, 2014, when it landed and was recovered at Vandenberg...
 
 

Boeing concludes commercial crew space act agreement for CST-100/Atlas V

Boeing has successfully completed the final milestone of its Commercial Crew Integrated Capability Space Act Agreement with NASA. The work and testing completed under the agreement resulted in significant maturation of Boeing’s crew transportation system, including the CST-100 spacecraft and Atlas V rocket. NASA in July approved the Critical Design Review Board milestone for Boeing’...
 
 

AF to release small business research solicitations

The Air Force Small Business Innovation Research and Small Business Technology Transfer program office is set to release its fiscal year 2015 list of topics Oct. 22, on the SBIR/STTR website.  Small businesses and research institutions with expertise to address the topics’ technology challenges are encouraged to submit proposals. During 2014, the Defense Department SBIR...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>