Tech

May 8, 2012

Jet engine to eat cereal, crayons for a purpose

NASA photographs by Tony Landis

Technicians prepare the U.S. Air Force’s first C-17, tail #87-0025, during Phase I of VIPR engine health monitoring tests. The aircraft was recently retired to the National Museum of the U.S. Air Force in Dayton, Ohio.

It might not surprise you to find cereal and crayons beneath your sofa cushions, especially if you are a parent with young children. But what if you found them in a jet engine?

If you’re a NASA engineer, you might declare success in a test of new aircraft engine health monitoring technology designed to provide early warning of engine problems, including the destructive effect of volcanic ash.

NASA’s Aviation Safety Program is developing technology for improved sensors to help spot changes in vibration, speed, temperature and emissions which are symptomatic of engine glitches. These advanced sensors could alert ground crews to problems that can be eliminated with preventive maintenance before becoming serious safety concerns. Ultimately, the sensors could alert pilots to the presence of destructive volcanic ash particles too small for the eyes to see, giving more time for evasive action to prevent engine damage in flight.

Letting a jet engine suck up foreign objects usually is a no-no, but engineers at NASA’s Dryden Flight Research Center will bend the rules in an upcoming experiment with a U.S. Air Force C-17 cargo transport. The cereal and crayons will leave a colorful trail of grains and wax that the researchers can see and study to gauge how well the sensors work.

Dryden engineers ran a similar test using water in December 2011 to lay the groundwork for more complex experiments. They operated the C-17 in normal use and simulated fault conditions after outfitting one of its two Pratt & Whitney F117 turbofan engines – military versions of Pratt & Whitney’s commercial airline PW-2000 turbofan engines – with the advanced sensors.

The second test, in early 2013, will use cereal and crayons to verify that the sensors can detect tiny bits of debris. After that, engineers will conduct a third and final test with very hard, glass-like particles that mimic volcanic ash. Because it is difficult and risky to create problems intentionally on a jet engine in flight, the aircraft will remain on the ground for both tests.

“The point of tossing cereal and crayons into the engine is to trigger some small change for the sensors to detect, without harming the engine,” said Dave Berger, a leader of the Vehicle Integrated Propulsion test series. “Once the sensitivity of the sensors is established, we will end with a real-world scenario by introducing volcanic ash, which really can – and does – tear up an engine.”

Water forms an interesting cyclonic twist as it is intentionally sucked into the test engine of a U.S. Air Force C-17 transport aircraft during the VIPR project engine health monitoring tests conducted by NASA Dryden. The water was contained on a special platform built by NASA Dryden’s Fabrication Branch for the tests.

The final test with simulated ash will assess how early the health monitoring sensors and their associated software can detect and report a problem. The test will result in the engine’s failure.

“Being able to take an overhauled engine and run it all the way to the end of its life through research experiments is a unique opportunity,” said Berger.

ASA is partnering with the U.S. Air Force and Pratt & Whitney on the VIPR project. Since a volcanic eruption in Iceland disrupted air traffic worldwide for weeks in 2009, there is renewed interest in being able to detect volcanic ash in flight. The Air Force has conducted extensive tests on the effects of volcanic ash ingestion into jet engines, but sensors that can detect the destructive effect of the ash were not available in those tests. They also are not available on current production jet engines.

While instrumentation was being installed on the test engine, NASA Dryden’s Fabrication Branch contributed significant support by building two very unique pieces of ground support equipment. The first was a 24-foot diameter water platform designed to sit below and in front of the research engine during ground testing. This adjustable height platform provided water for the engine to ingest for visualization purposes during tests related to engine diameter as well as its height off the ground.

The other piece of support equipment is an emission sensor rig designed to sit just behind the engine and sweep across the engine’s exhaust path in order to collect exhaust gases for emissions data.

Based at Dryden, VIPR is funded by NASA’s Aeronautics Research Mission Directorate, which manages the Aviation Safety Program.

A plume of oil smoke flows from the right inboard engine while a probe collects emissions data, one of numerous tests conducted during Phase I of VIPR engine health monitoring tests on the Air Force C-17 test aircraft.




All of this week's top headlines to your email every Friday.


 
 

 
University of Rhode Island photograph by Tom Glennon

NASA kicks off field campaign to probe ocean ecology, carbon cycle

University of Rhode Island photograph by Tom Glennon The Research Vessel Endeavor is the floating laboratory that scientists will use for the ocean-going portion of the SABOR field campaign this summer. NASA embarks this week o...
 
 
NASA photograph by Carla Thomas

NASA’s high-flying laser altimeter to check out summer sea ice, more

NASA photograph by Carla Thomas This summer, the Multiple Altimeter Beam Experimental Lidar, or MABEL, will fly above Alaska and the Arctic Ocean on one of NASA’s ER-2 high-altitude aircraft. Sea ice in summer looks dramatica...
 
 
SOFIA

Outer space to inner space: SOFIA inside Lufthansa Technik hangar

NASA photograph by Jeff Doughty NASA’s Stratospheric Observatory for Infrared Astronomy is shown inside the Lufthansa Technik hangar in Hamburg, Germany where it is beginning its decadal inspection. Flight, aircraft maint...
 

 
NASA photograph by Tony Landis

New life for an old bird: NASA’s F-15B test bed gets new engines

NASA photograph NASA’s F-15B flight research test bed carries shuttle thermal insulation panels on its underbelly during a research flight in 2005. NASA Armstrong’s F-15B aeronautics research test bed, a workhorse at th...
 
 
NASA photograph by Tom Tschida

Towed glider benefits from center’s new 3-D printer capability

NASA photograph by Tom Tschida The major components of NASA Armstrong’s new high-resolution 3-D additive manufacturing printer occupy a shelf in the center’s subscale aircraft research lab. Robert “Red” ...
 
 
NASA photograph by Emmett Given

NASA completes testing on 3-D printer

NASA photograph by Emmett Given United Space Alliance engineer Cynthia Azzarita, left, and Boeing Company engineer Chen Deng, members of the Human Factors Integration Team at NASA’s Johnson Space Center, conduct a “...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>