Business

May 10, 2012

Boeing completes first flight of QF-16 aerial target for U.S. Air Force

Boeing and the U.S. Air Force completed the first manned flight of the QF-16 Full Scale Aerial Target May 4 at Cecil Field in Jacksonville, Fla.

The QF-16 took off at 3:05 p.m., EDT, and climbed to an altitude of 41,000 feet during its 66-minute flight.

The Air Force awarded a multi-year contract to Boeing in March 2010 that represented Phase I of the initial engineering, manufacturing and development of the QF-16, with options to buy up to 126 FSATs.

“With this successful first flight of the QF-16, the Air Force, Boeing and our supplier-partners have laid the groundwork for the program to enter low-rate production in 2013 and make its first production delivery in 2014,” said Torbjorn Sjogren, Boeing vice president, Global Maintenance and Upgrades.

The functional check flight of the F-16, under control of a Boeing test pilot, validated the basic aircraft performance with the QF-16 drone modification package installed. The additional hardware Boeing installs allows the QF-16 to fly in an unmanned mode while under the control of a ground-based control system such as the Gulf Range Drone Control System at Tyndall Air Force Base, Fla., or the Drone Formation Control System at White Sands Missile Range, N.M. During the current test phase in Jacksonville, a GRDCS mobile trailer with portable transmission towers provides communications between the flight controller and other personnel on the ground and the QF-16 pilot.

“This was a tremendous milestone for the program and for Boeing because it signals our continued success as an off-Boeing platform support and sustainment provider,” said Bob Insinna, Boeing QF-16 program manager.

The QF-16s will be a higher-performing aircraft than the QF-4 they replace and representative of fourth-generation targets. They will be flown manned or unmanned within a controlled range and equipped to evaluate how U.S. fighters and weapons will operate against potential adversaries.

Boeing will deliver six QF-16 test aircraft to Tyndall in October for additional testing over the Gulf Range. Following the successful conclusion of these tests, Boeing will support government flight testing from Holloman Air Force Base, N.M., over the WSMR complex.

 




All of this week's top headlines to your email every Friday.


 
 

 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 
 

Boeing breaks ground in St. Louis for new composites center

Boeing Dec. 16 began construction in St. Louis of a new 367,000-square-foot facility in which it will build parts for the newest member of its 777 commercial airplanes family, the 777X.  About 700 new jobs will be created for the 777X work. Construction should be complete in 2016, with work on 777X wing and empennage...
 

 

Raytheon, Bell conduct first missile launch from V-22

Raytheon and Bell Helicopter have completed two successful launches of the Griffin B missile from a Bell Boeing V-22 Osprey multi-mission aircraft at Yuma Proving Ground, Ariz. As an industry funded effort with Bell’s Xworx, Raytheon demonstrated the simplicity of integrating the Griffin B missile onto the V-22 platform. “This is the first time a...
 
 

Raytheon gallium nitride technology validated for space applications

Satellites may soon carry Raytheon’s Gallium Nitride technology into Earth orbit. Raytheon has successfully validated its GaN Monolithic Microwave Integrated Circuit technology for use in space-bound equipment. Raytheon GaN MMICs, fabricated at its Andover, Massachusetts foundry, demonstrated the radiation hardness required for space through Single Event Burn-out and Total Ionizing Dose t...
 
 
Air Force photograph by A1C Alexander Guerrero

317th AG delivers during massive JFE

Air Force photograph by A1C Alexander Guerrero Eleven C-130H Herculesí from various Air National Guard units and thirteen C-130J Super Herculesí from the 317th Airlift Group at Dyess Air Force Base, Texas, prepare to take off...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>