Tech

May 14, 2012

NASA’s Marshall Center completes wind tunnel testing for Dream Chaser® space system

NASA’s Marshall Space Flight Center in Huntsville, Ala., successfully completed wind tunnel testing for Sierra Nevada Corp. Space Systems of Louisville, Colo. The test will provide aerodynamic data that will aid in the design of the new Dream Chaser® Space System.

During tests at Marshall’s wind tunnel facility, a scale model of SNC’s Dream Chaser orbital crew vehicle was mounted on a scale model of the United Launch Alliance’s Atlas V launch vehicle.

More than 400 data runs were performed at subsonic, transonic and supersonic speeds to study the effects of how air moves past the model. Nine full-stack configurations were tested over a Mach range of .4, or 304 miles per hour at sea level, to Mach 5, or 3,800 miles per hour at sea level, at various launch vehicle roll angles.

The data generated from this test series, coupled with data from computational fluid dynamics studies, will define the aerodynamic characteristics of the Dream Chaser – Atlas V launch stack during the ascent phase of flight. Obtaining this data will enable higher-fidelity loads analysis, better definition of launch vehicle performance, and will aid in further refining Dream Chaser’s trajectory design for orbital vehicle launches.

“We’re glad Marshall could support SNC in completing these wind tunnel tests quickly and affordably and early in the design phase,” said Teresa Vanhooser, manager of the Flight Programs and Partnerships Office at Marshall. “Our trisonic wind tunnel and engineering staff helps partners understand the aerodynamic integrity and stability of spacecraft and launch vehicles, like the Dream Chaser, over a variety of wind speeds and phases of flight.”

Mark Sirangelo, corporate vice president and head of SNC’s Space Systems, said: “The Dream Chaser Program is grateful for the opportunity to leverage the experience, expertise, and resources of Marshall, made possible by the unique government-commercial partnership created through NASA’s Commercial Crew Development Program. Sierra Nevada Corporation looks forward to expanding our successful relationship with Marshall, as well as creating new business opportunities in the Huntsville area.”

Marshall’s Aerodynamic Research Facility’s 14-inch trisonic wind tunnel is an intermittent, blow-down tunnel that operates from high-pressure storage to either vacuum or atmospheric exhaust. The facility is capable of conducting tests in the subsonic, transonic and supersonic mach ranges using its two interchangeable test sections. Subsonic Mach numbers are below Mach 1, the speed of sound, or 760 miles per hour at sea level, while transonic speeds approach and are slightly above Mach 1. The facility can achieve a maximum supersonic Mach number of 5, or five times the speed of sound.

SNC is currently one of the NASA Commercial Crew Development partners awarded funding under a Space Act Agreement to mature their Dream Chaser orbital crew transportation system. NASA’s CCDev effort is being led by NASA’s Kennedy Space Center and supported by NASA technical experts across the agency, including the Marshall Center for a variety of technical areas.

The effort to define the aerodynamic characteristics of the Dream Chaser Space System is being conducted under a reimbursable Space Act Agreement funded by SNC and executed with the support of aerodynamicists and wind tunnel experts from the Marshall Center and United Launch Alliance.




All of this week's top headlines to your email every Friday.


 
 

 
University of Rhode Island photograph by Tom Glennon

NASA kicks off field campaign to probe ocean ecology, carbon cycle

University of Rhode Island photograph by Tom Glennon The Research Vessel Endeavor is the floating laboratory that scientists will use for the ocean-going portion of the SABOR field campaign this summer. NASA embarks this week o...
 
 
NASA photograph by Carla Thomas

NASA’s high-flying laser altimeter to check out summer sea ice, more

NASA photograph by Carla Thomas This summer, the Multiple Altimeter Beam Experimental Lidar, or MABEL, will fly above Alaska and the Arctic Ocean on one of NASA’s ER-2 high-altitude aircraft. Sea ice in summer looks dramatica...
 
 
SOFIA

Outer space to inner space: SOFIA inside Lufthansa Technik hangar

NASA photograph by Jeff Doughty NASA’s Stratospheric Observatory for Infrared Astronomy is shown inside the Lufthansa Technik hangar in Hamburg, Germany where it is beginning its decadal inspection. Flight, aircraft maint...
 

 
NASA photograph by Tony Landis

New life for an old bird: NASA’s F-15B test bed gets new engines

NASA photograph NASA’s F-15B flight research test bed carries shuttle thermal insulation panels on its underbelly during a research flight in 2005. NASA Armstrong’s F-15B aeronautics research test bed, a workhorse at th...
 
 
NASA photograph by Tom Tschida

Towed glider benefits from center’s new 3-D printer capability

NASA photograph by Tom Tschida The major components of NASA Armstrong’s new high-resolution 3-D additive manufacturing printer occupy a shelf in the center’s subscale aircraft research lab. Robert “Red” ...
 
 
NASA photograph by Emmett Given

NASA completes testing on 3-D printer

NASA photograph by Emmett Given United Space Alliance engineer Cynthia Azzarita, left, and Boeing Company engineer Chen Deng, members of the Human Factors Integration Team at NASA’s Johnson Space Center, conduct a “...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>