Defense

June 25, 2012

Picatinny engineers set phasers to ‘fry’

by Jason Kaneshiro
Picatinny Arsenal, N.J.

A guided lightning bolt travels horizontally, then hits a car when it finds the lower resistance path to ground. The lightning is guided in a laser-induced plasma channel, then it deviates from the channel when it gets close to the target and has a lower-resistance path to ground. Though more work needs to be done, Picatinny Arsenal engineers believe the technology holds great promise.

Scientists and engineers at Picatinny Arsenal in New Jersey are busy developing a device that will shoot lightning bolts down laser beams to destroy its target. Soldiers and science fiction fans, you’re welcome.

“We never got tired of the lightning bolts zapping our simulated (targets),” said George Fischer, lead scientist on the project.

The Laser-Induced Plasma Channel, or LIPC, is designed to take out targets that conduct electricity better than the air or ground that surrounds them. How did the scientists harness the seemingly random path made by lightning bolts and how does a laser help? To understand how the technology, it helps to get a brief background on physics.

“Light travels more slowly in gases and solids than it does in a vacuum,” explained Fischer. “We typically think of the speed of light in each material as constant. There is, however, a very small additional intensity-dependent factor to its speed. In air, this factor is positive, so light slows down by a tiny fraction when the light is more intense.”

“If a laser puts out a pulse with modest energy, but the time is incredibly tiny, the power can be huge,” Fischer continued. “During the duration of the laser pulse, it can be putting out more power than a large city needs, but the pulse only lasts for two-trillionths of a second.”

Why is this important?

“For very powerful and high intensity laser pulses, the air can act like a lens, keeping the light in a small-diameter filament,” said Fischer. “We use an ultra-short-pulse laser of modest energy to make a laser beam so intense that it focuses on itself in air and stays focused in a filament.”

To put the energy output in perspective, a big filament light bulb uses 100 watts. The optical amplifier output is 50 billion watts of optical power, Fischer said.

“If a laser beam is intense enough, its electro-magnetic field is strong enough to rip electrons off of air molecules, creating plasma,” said Fischer. “This plasma is located along the path of the laser beam, so we can direct it wherever we want by moving a mirror.”

“Air is composed of neutral molecules and is an insulator,” Fischer said. When lightning from a thunderstorm leaps from cloud to ground, it behaves just as any other sources of electrical energy and follows the path of least resistance.

“The plasma channel conducts electricity way better than un-ionized air, so if we set up the laser so that the filament comes near a high voltage source, the electrical energy will travel down the filament,” Fischer elaborated.

A target, an enemy vehicle or even some types of unexploded ordnance, would be a better conductor than the ground it sits on. Since the voltage drop across the target would be the same as the voltage drop across the same distance of ground, current flows through the target. In the case of unexploded ordnance, it would detonate, explained Fischer.

Even though the physics behind the project is sound, the technical challenges were many, Fischer recalled.

“If the light focuses in air, there is certainly the danger that it will focus in a glass lens, or in other parts of the laser amplifier system, destroying it,” Fischer said. “We needed to lower the intensity in the optical amplifier and keep it low until we wanted the light to self-focus in air.

Other challenges included synchronizing the laser with the high voltage, ruggedizing the device to survive under the extreme environmental conditions of an operational environment, and powering the system for extended periods of time.

“There are a number of high-tech components that need to run continuously,” said Fischer.

But despite the challenges, the project has made notable progress in recent months.

“Definitely our last week of testing in January 2012 was a highlight,” said Tom Shadis, project officer on the program. “We had a well thought-out test plan and our ARDEC and contractor team worked together tirelessly and efficiently over long hours to work through the entire plan.

“The excellent results certainly added to the excitement and camaraderie,” added Fischer.

As development continues, Shadis said that those involved with the project never lose sight of the importance of their work.

“We were all proud to be serving our war fighters and can picture the LIPC system saving U.S. lives,” Fischer said.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 19, 2014

News: McKeon on broader military authorization: Anything can ‘fail or pass’ - Rep. Howard “Buck” McKeon, R-Calif., chairman of the House Armed Services Committee, said if Congress returns after the midterm elections to weigh a broader military authorization for the battle against Islamic State, it might not pass. Defense contractor gets 7 years for giving secrets...
 
 

News Briefs September 19, 2014

U.S. military deaths in Afghanistan at 2,203 As of Sept. 16, 2014, at least 2,203 members of the U.S. military had died in Afghanistan as a result of the U.S.-led invasion of Afghanistan in late 2001, according to an Associated Press count. At least 1,823 military service members have died in Afghanistan as a result...
 
 

Pratt & Whitney, U.S. Air Force complete qualification for F135 engine testing

Pratt & Whitney, a United Technologies Corp. , together with its U.S. Air Force partner at the F135 Heavy Maintenance Center at Tinker Air Force Base, Okla., celebrated another significant milestone qualification for F135 engine testing at the Oklahoma City Air Logistics Complex. OC-ALC which in addition to engine testing is also qualified to perform...
 

 
Navy photograph

Triton has first cross-country flight from Palmdale

Northrop Grumman photograph The MQ-4C Triton Unmanned Aircraft System takes off from Northrop Grummanís Palmdale, Calif., facility Sept. 17 for its first cross-country flight to Naval Air Station Patuxent, River, Md. PALMDALE,...
 
 
Air Force photograph by Michael J. Pausic

Future of NATO: Adapting to a new security environment

Air Force photograph by Michael J. Pausic Gen. Phillip Breedlove informs the assembled crowd about the results of the recent NATO Summit and the areas of instability that affect Europe that have regional implications. Seated in...
 
 
Air Force photograph by Scott M. Ash

AFRL commander describes Air Force’s technology vision

Air Force photograph by Scott M. Ash Maj. Gen. Thomas Masiello takes a question from an audience member after discussing Air Force Research Laboratory breakthrough technologies during the 2014 Air Force Association’s Air ...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>