Business

July 9, 2012

XCOR establishing new commercial spaceflight R&D center in Texas

The Midland Development Corporation and XCOR Aerospace jointly announced July 9 the establishment of XCOR’s new Commercial Space Research and Development Center Headquarters that will be created over the next 18 months in Midland, Texas.

XCOR manufactures reusable rocket engines for major aerospace prime contractors and is the designer, manufacturer and operator of the Lynx, a winged fully reusable, high performance suborbital space vehicle that is designed to safely carry two persons or scientific experiments to the edge of space and back up to four times per day.

“This is a great day for Midland and a huge step forward for the State of Texas. Visionary companies, like XCOR, continue to choose Texas because they know that innovation is fueled by freedom,” Gov. Rick Perry said. “Whether on the cutting edge of biotech, communications, commerce or privatized efforts to serve the needs of the next generation of space explorers, you can find Texas at the forefront of the movement.”

XCOR will be establishing their new R&D center on the flight line at Midland International Airport in a newly renovated 60,000-square-foot hangar, which will include office space and a test facility. The renovation is expected to commence in early 2013, and be completed by the late autumn.

“XCOR will be upgrading an existing hangar at Midland International Airport,” stated Marv Esterly, director of airports at MAF. “This new R&D facility has the potential to open the door to even more economic development at our airport and for our community.”

“We are pleased to be establishing our R&D Center in Midland, Texas, where the weather, surrounding landscape, the airport, and the local & state government environment are ideally situated for the future growth and the ultimate realization of a fully reusable orbital system,” said Andrew Nelson, chief operating officer of XCOR Aerospace. “With future suborbital operational sites on the East and West Coasts of the United States and around the world, plus a manufacturing and test facility geographically separate from our R&D facility, Midland will truly be at the heart of XCOR’s innovation engine.”

“The decision to establish XCOR’s Research and Development Center Headquarters in Midland came after intense competition from other locations,” stated Pam Welch, executive director of MDC, “once the technical and operational needs of XCOR were met, the final factors influencing the decision to locate R&D to Midland included the friendly business climate, a predictable regulatory environment, and the State of Texas tort reform initiatives. These factors allowed XCOR to see a long term future happening in Midland.”

Laura Roman, MDC chairman, stated “Today we celebrate the economic diversity that XCOR’s Research and Development Center Headquarters will bring to Midland along with the $12,000,000 of new payroll and capital investment over the next five years to our community with an estimated average annual wage of over $60,000 per job.”

In parallel with the XCOR facility renovation, the City of Midland is applying to the Federal Aviation Administration for a Commercial Space Launch Site designation for MAF, an estimated 12 to 18 months process. Upon completion of the licensing process and the hangar renovation, the XCOR presence will begin to ramp up.

The FAA spaceport designation will also be an important economic development tool because of the potential growth in the commercial space sector as NASA relies more on commercial service providers for launch capability and the space tourism market evolves. Marv Esterly, noted, “When our application is approved, the MAF will be the first “Primary Commercial Service Airport” to be granted this designation, and the combination of the two makes Midland attractive to other commercial space companies.”




All of this week's top headlines to your email every Friday.


 
 

 

Headlines January 28, 2015

News: Panel will propose new military retirement system - The long-awaited report on military compensation set to drop Thursday will propose fundamental changes to military retirement and health care benefits, according to several people familiar with the report. Source: DOD to request $585 billion for fiscal 2016 - The Department of Defense is preparing to submit a...
 
 

News Briefs January 28, 2015

Defense contractor to pay $2 million to settle claims A Northern California defense contractor will pay the federal government $2 million to settle claims about its manufacturing of parts for remote-controlled aircraft. The U.S. Attorney’s Office in Sacramento says Sacramento-based Composite Engineering Inc. agreed to pay the money to end allegations that it artificially inflated...
 
 
Navy photograph

USS Roosevelt marks 200,000 trap

Navy photograph An F/A-18F Super Hornet flown by Capt. Daniel Grieco, commanding officer of the aircraft carrier USS Theodore Roosevelt (CVN 71), and Capt. Benjamin Hewlett, deputy commander of Carrier Air Wing (CVW) 1, complet...
 

 
Navy photograph by PO1 William Larned

USS California returns from maiden deployment

Navy photograph by PO1 William Larned The Virginia-class attack submarine USS California (SSN 781) returns from its maiden deployment to its homeport at Naval Submarine Base New London. Under the command of Cmdr. Shawn Huey, Ca...
 
 
Army photograph

Army proves new watercraft capabilities

Army photograph Marine Corps assets are loaded onto the USNS Sgt. Matej Kocak (T-AK 3005), from an U.S. Army Landing Craft Utility, or LCU, USAV Port Hudson during port operations, at White Beach Naval Base, Jan. 22, 2015. Sold...
 
 

Orbital stockholders approve merger with ATK’s aerospace, defense groups

Orbital Sciences Corporation announced Jan. 27 that at a special meeting, the company’s stockholders voted overwhelmingly to approve the proposed merger with the Aerospace and Defense Groups of Alliant Techsystems Inc., pursuant to the definitive transaction agreement dated April 28, 2014. Approximately 99 percent of the votes cast at the special meeting voted in favor...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>