Business

July 10, 2012

Airbus starts production of the A320neo Family

Airbus photograph

The first ‘cutting of metal’ for the Airbus A320neo has taken place in Toulouse. Marking the start of manufacturing of the airliner, machining began of the first engine pylon component at the “Saint-Eloi” Airbus dedicated pylon and nacelle factory in Toulouse, France.

The first ‘cutting of metal’ for the Airbus A320neo has taken place in Toulouse, France.

Marking the start of manufacturing of the airliner, machining began of the first engine pylon component at the “Saint-Eloi” Airbus dedicated pylon and nacelle factory in Toulouse.

Pylons are structures which hold the engine to the wing. The new pylon for the A320neo retains high commonality with the existing A320’s pylon design, while also incorporating more titanium as well as some advanced architectures developed for the A380 pylon. In addition, the new component also features an advanced ‘aft-pylon-fairing’ concept specifically tailored for the more fuel efficient NEO engines.

Tom Williams, executive vice president of Programs at Airbus said: “This first metal cut of the engine pylon component for the A320neo heralds the completion of the design phase and start of production for the world’s fastest selling airliner. We are excited to be already starting manufacture of the world most eco-efficient single-aisle airliner today.”

The Airbus Saint-Eloi site is specialised in the design, manufacturing, assembly, equipping and testing of engine pylons and design and manufacturing of titanium nacelle parts for all the aircraft in the Airbus family. Featuring the latest efficient ‘moving-line’ lean-production concept, the facility is also the leading European centre for hard metals machining and transformation, including titanium.

Airbus photograph

Production for Airbus’ eco-efficient A320neo (new engine option) jetliner family began with machining of the first engine pylon component in Toulouse, France at the company’s Saint-Eloi site.

The A320neo ‘new engine option’ for the A320 Family will enter into service from late 2015. It incorporates latest generation engines and large Sharklet wing-tip devices, which together with the new engines will deliver up to 15 percent in fuel savings. With more than 1,400 firm orders since its launch in 2010, the A320neo Family has proven to be the fastest selling commercial aircraft program ever.

Airbus is the world’s leading commercial aircraft manufacturer producing the most modern and efficient airliners in every category, from the single-aisle A320 Family up to the world’s largest airliner, the A380. Airbus has design and manufacturing facilities in France, Germany, the United Kingdom, and Spain as well as subsidiaries in the United States, China, Japan and in the Middle East. Headquartered in Toulouse, France, Airbus is an EADS company.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines July 31, 2015

News: Carter: Military leaders could arm more troops at home – Following the recent fatal shooting of four Marines and a sailor in Tennessee, Defense Secretary Ash Carter is ordering the military services to consider new policies that would enhance security for troops at home, including potentially arming more personnel.   Business: DOD weighs supplier base,...
 
 

News Briefs July 31, 2015

U.S. delivering eight newer F-16 warplanes to Egypt The United States Embassy in Cairo says the U.S. is delivering eight newer F-16 warplanes to Egypt as part of an ongoing military support package. It says in a July 30 statement that the aircraft, of the current Block 52 production variant, will be flown in from...
 
 
Lockheed Martin photograph

Lockheed Martin successfully tests design changes for Orion spacecraft’s fairing separation system

Lockheed Martin photograph A protective panel for Orion’s service module is jettisoned during testing at Lockheed Martin’s Sunnyvale, California facility. This test series evaluated design changes to the spacecraft’s fair...
 

 

Australian company to provide parts for initial production of Triton UAS

Northrop Grumman has awarded the first Australian supplier contract for the U.S. Navy’s MQ-4C Triton unmanned aircraft system initial production lot to Ferra Engineering. Brisbane-based Ferra Engineering will manufacture mechanical sub-assemblies for the first four Triton air vehicles including structural components. “At Northrop Grumman it’s very important to not only develop...
 
 
Boeing photograph

CH-46 ‘Phrog’ makes its last hop

Boeing photograph The CH-46 Sea Knight helicopter commonly known as the “Phrog,” is set to retire and to be flown one last time by Reserve Marine Medium Helicopter Squadron (HMM) 774 on Aug. 1. The CH-46 Sea Knight is a med...
 
 

Insitu awarded LRIP Lot IV RQ-21A Blackjack Systems contract

Under the terms of its latest contract, Insitu will build six RQ-21A Blackjack systems for the U.S. Navy and Marine Corps. The $78-million Small Tactical Unmanned Aircraft Systems Lot IV Low Rate Initial Production contract is the latest event in the program’s progression toward the Initial Operational Test and Evaluation phase.   “This award will...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>