Defense

July 13, 2012

MAFFS operations move west

MAFFS-equipped C-130s from the 153rd Air Expeditionary Group prepare to take off from Peterson Air Force Base, Colo. June 26, 2012. Crews made 20 drops delivering 52,000 gallons of retardant in an effort to suppress the Waldo Canyon fire.

Military C-130s equipped with the U.S. Forest Service’s Modular Airborne Fire Fighting Systems have moved staging operations from Cheyenne, Wyo. and Colorado Springs, Colo., to Boise, Idaho, and Salt Lake City.

Four of the aircraft, from the 153rd and 302nd Airlift wings are operating from Boise Air Terminal, in Idaho. Two from the 146th Airlift Wing are operating from Hill Air Force Base, near Salt Lake City.

The U.S. Forest Service requested MAFFS operations relocate to reduce response time for fire fighting, said Col. Jerry Champlin, 153rd Air Expeditionary Group commander. “With all the recent rain in the Rocky Mountains, they just don’t need us down there right now.”

The MAFFS crews performed 16 drops July 10 on various fires in Idaho.

Since being activated June 25, the MAFFS fleet has completed 163 drops of 423,931 gallons on 10 Rocky Mountain area fires.

MAFFS are operated by four military units: The 153rd Airlift Wing, Wyoming Air National Guard; 146th Airlift Wing, California Air National Guard; 145th Airlift Wing, North Carolina Air National Guard; and the 302nd Airlift Wing, U.S. Air Force Reserve Command.

Four airmen assigned to the 145th AW died July 1 during a MAFFS mission assisting with firefighting efforts on the White Draw fire, in S.D. The incident currently is under investigation.

MAFFS is a joint DOD and U.S. Forest Service program designed to provide additional aerial firefighting resources when commercial and private airtankers are no longer able to meet the needs of the forest service.

MAFFS is a self-contained aerial firefighting system owned by the U.S. Forest Service that can discharge 3,000 gallons of water or fire retardant in less than 5 seconds, covering an area one-quarter of a mile long by 100 feet wide. Once the load is discharged, it can be refilled in less than 12 minutes.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>