Space

July 23, 2012

NASA successfully tests hypersonic inflatable heat shield

A large inflatable heat shield developed by NASA’s Space Technology Program has successfully survived a trip through Earth’s atmosphere while travelling at hypersonic speeds up to 7,600 mph.

The Inflatable Reentry Vehicle Experiment (IRVE-3) was launched by sounding rocket at 7:01 a.m. Monday from NASA’s Wallops Flight Facility on Wallops Island, Va.

The purpose of the IRVE-3 test was to show that a space capsule can use an inflatable outer shell to slow and protect itself as it enters an atmosphere at hypersonic speed during planetary entry and descent, or as it returns to Earth with cargo from the International Space Station.

“It’s great to see the initial results indicate we had a successful test of the hypersonic inflatable aerodynamic decelerator,” said James Reuther, deputy director of NASA’s Space Technology Program. “This demonstration flight goes a long way toward showing the value of these technologies to serve as atmospheric entry heat shields for future space.”

IRVE-3, a cone of uninflated high-tech rings covered by a thermal blanket of layers of heat resistant materials, launched from a three-stage Black Brant rocket for its suborbital flight. About 6 minutes into the flight, as planned, the 680-pound inflatable aeroshell, or heat shield, and its payload separated from the launch vehicle’s 22-inch-diameter nose cone about 280 miles over the Atlantic Ocean.

An inflation system pumped nitrogen into the IRVE-3 aeroshell until it expanded to a mushroom shape almost 10 feet in diameter. Then the aeroshell plummeted at hypersonic speeds through Earth’s atmosphere. Engineers in the Wallops control room watched as four onboard cameras confirmed the inflatable shield held its shape despite the force and high heat of reentry. Onboard instruments provided temperature and pressure data. Researchers will study that information to help develop future inflatable heat shield designs.

After its flight, IRVE-3 fell into the Atlantic Ocean off the coast of North Carolina. From launch to splashdown, the flight lasted about 20 minutes. A high-speed U.S. Navy Stiletto boat is in the area with a crew that will attempt to retrieve IRVE-3. The Stiletto is a maritime demonstration craft operated by the Naval Surface Warfare Center Carderock, Combatant Craft Division, and is based at Joint Expeditionary Base Little Creek-Ft Story, Va.

“A team of NASA engineers and technicians spent the last three years preparing for the IRVE-3 flight,” said Lesa Roe, director of NASA’s Langley Research Center in Hampton, Va. “We are pushing the boundaries with this flight. We look forward to future test launches of even bigger inflatable aeroshells.”

This test was a follow-on to the successful IRVE-2, which showed an inflatable heat shield could survive intact after coming through Earth’s atmosphere. IRVE-3 was the same size as IRVE-2, but had a heavier payload and was subjected to a much higher re-entry heat, more like what a heat shield might encounter in space.

IRVE-3 is part of the Hypersonic Inflatable Aerodynamic Decelerator Project within the Game Changing Development Program, part of NASA’s Space Technology Program. Langley developed and manages the IRVE-3 and HIAD programs.




All of this week's top headlines to your email every Friday.


 
 

 
NASA, ESA, PSI, JHU/APL, STScI/AURA image

Close encounters: Comet Siding Spring seen next to Mars

NASA, ESA, PSI, JHU/APL, STScI/AURA image This composite NASA Hubble Space Telescope Image captures the positions of comet Siding Spring and Mars in a never-before-seen close passage of a comet by the Red Planet, which happened...
 
 

NASA Astronaut Scott Kelly shares bullying prevention message ahead of one-year mission

NASA astronaut Scott Kelly, who is scheduled to fly on a one-year spaceflight mission in 2015, is lending his voice to help reduce childhood bullying. As part of Bullying Prevention Awareness Month, Kelly recorded a special message encouraging bystanders to take action. “Be more than just a bystander,” said Kelly in the message. “Take action...
 
 

NASA seeks ultra-lightweight materials to help enable journey to Mars

NASA is seeking proposals to develop and manufacture ultra-lightweight materials for aerospace vehicles and structures of the future. Proposals will demonstrate lower-mass alternatives to honeycomb or foam cores currently used in composite sandwich structures. Composite sandwich structures are a special type of material made by attaching two thin skins to a lightweight core. This type...
 

 

Boeing concludes commercial crew space act agreement for CST-100/Atlas V

Boeing has successfully completed the final milestone of its Commercial Crew Integrated Capability Space Act Agreement with NASA. The work and testing completed under the agreement resulted in significant maturation of Boeing’s crew transportation system, including the CST-100 spacecraft and Atlas V rocket. NASA in July approved the Critical Design Review Board milestone for Boeing’...
 
 

NASA partners with leading technology innovators to enable future exploration

Recognizing that technology drives exploration, NASA has selected four teams of agency technologists for participation in the Early Career Initiative pilot program. The program encourages creativity and innovation among early career NASA technologists by engaging them in hands-on technology development opportunities needed for future missions. NASA’s Space Technology Mission Directorate c...
 
 

New commercial rocket descent data may help NASA with future Mars landings

NASA successfully captured thermal images of a SpaceX Falcon 9 rocket on its descent after it launched in September from Cape Canaveral Air Force Station, Fla. The data from these thermal images may provide critical engineering information for future missions to the surface of Mars. “Because the technologies required to land large payloads on Mars...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>