Defense

July 30, 2012

Navy conducts Pax River’s first flight of X-47B unmanned aircraft

The X-47B tailless, unmanned aircraft launched from its initial Naval Air Station Patuxent River, Md., flight July 29.

The Navy made Pax River history July 29 after it conducted the naval air station’s historic first flight of the X-47B Unmanned Combat Air System demonstrator.

At 11 a.m., EDT, the tailless, unmanned aircraft launched from Naval Air Station Patuxent River, Md., and flew for a planned 35 minutes. The aircraft reached an altitude of 7,500 feet and an air speed of 180 knots during its flight over the Chesapeake Bay before successfully landing back at Pax River.

“This milestone event is the first of many flights at Pax River to demonstrate X-47B’s compatibility with aircraft carrier flight procedures and launch/recovery equipment,” said Matt Funk, UCAS lead test engineer. “The unique airspace and ship equipment at Pax River allow us to conduct the testing here before we land aboard the aircraft carrier next year.”

The X-47B landed safely at Naval Air Station Patuxent River, Md., after a 35-minute flight over the Chesapeake Bay, July 29.

The X-47B traveled from Edwards Air Force base, Calif., to Pax River in June to enter its next phase of testing. UCAS-D team members will utilize the specialized testing capabilities and facilities available at Pax River in the coming months to validate the X-47B’s ability to perform in an aircraft carrier environment.

One of the testing facilities at Pax River is a simulated aircraft carrier environment, which will allow team members to ensure the aircraft is ready to operate in testing at sea. Land-based testing will establish X-47B has the ability to conduct precision approaches and to perform arrested landings and catapult launches prior to actual aircraft carrier operations.

“The X-47B’s flight today is another important step closer to the Navy’s vision of operating tailless, autonomous, unmanned systems from aircraft carriers,” said Capt. Jaime Engdahl, Navy UCAS program manager.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>