Space

August 6, 2012

Aerojet Propulsion helps land Mars Science Laboratory


 
Aerojet, a GenCorp company, announced Aug. 3 that its monopropellant hydrazine thrusters helped guide NASA’s Mars Science Laboratory to a successful landing on the red planet at 10:32 p.m., PDT, Aug. 5.

The much-anticipated landing delivered the rover Curiosity to the Martian surface.

Aerojet engines assisted with entry, descent and landing. The company’s thrusters also provided attitude control and trajectory correction maneuvers during the MSL’s transit to Mars.

MSL carried eight Aerojet MR-111C 1.0 lbf thrusters, eight Aerojet MR-107U 68 lbf thrusters and eight Aerojet MR-80B 800-lbf thrusters with a throttleable thrust range of >100:1. The 68 lbf and the 800 lbf thrusters supported the actual landing.

In June 2012, NASA reduced the MSL target landing area to about 12 miles long and four miles wide (20 kilometers by seven kilometers) on a site near the northern flank of Mount Sharp, inside Gale Crater on Mars. The landing timeline began with guided entry in the upper atmosphere of Mars and concluded with the sky crane drop-off of Curiosity and the remaining spacecraft fly-away.

This was the most complicated landing ever attempted on a planet.

“Aerojet joins NASA and the Jet Propulsion Laboratory in congratulating the MSL team on tonight’s historic landing,” said Julie Van Kleeck, Aerojet vice president of Space and Launch Systems. “Aerojet thrusters brought Viking 1 and 2 and the Phoenix Mars Lander to safe arrivals on Mars and we were confident that our MSL thrusters would once again help deliver success.”

The three different types of thrusters aboard the MSL were designed and manufactured at Aerojet’s Redmond, Wash. facility under contract to the Jet Propulsion Laboratory. The 800 lbf throttling engines were tested at Aerojet’s Sacramento facility.

NASA’s Jet Propulsion Laboratory in Pasadena, Calif. has trimmed the distance Curiosity will drive after landing by almost half, allowing the rover to reach the mountain months earlier. NASA determined it was possible to adjust landing plans because of increased confidence in the precision landing technology aboard the MSL spacecraft. Rock layers located in the mountain are the prime location for rover research.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines August 22, 2014

News: GAO: Pentagon violated law with Bergdahl swap - Congressional investigators say the Pentagon violated the law when it swapped five Taliban leaders for Army Sgt. Bowe Bergdahl, who was held prisoner in Afghanistan for five years.   Business: U.S. Air Force issues RFI for new rocket engine - The US Air Force is officially looking into...
 
 

News Briefs August 22, 2014

U.S. military deaths in Afghanistan at 2,200 As of Aug. 20, 2014, at least 2,200 members of the U.S. military had died in Afghanistan as a result of the U.S.-led invasion of Afghanistan in late 2001, according to an Associated Press count. At least 1,821 military service members have died in Afghanistan as a result...
 
 
navair-triton

MQ-4C Tritons to arrive at Pax River this fall

  MQ-4C Triton test air vehicles at Northrop Grumman’s facility in Palmdale, Calif., will fly cross-country to Naval Air Station Patuxent River, Md., this fall. The MQ-4C completed a test flight Aug. 19 with updated ...
 

 
Boeing photograph

Boeing program completes critical design, safety reviews

Boeing photograph Boeing recently completed the Phase Two Spacecraft Safety Review of its Crew Space Transportation-100 spacecraft and the Critical Design Review of its integrated systems, meeting all of the companyís Commerci...
 
 
global-hawk2

Air Combat Command loans Global Hawk to GVCTF

Air Force photograph by Jennifer Romo The 412th Test Wing’s Global Vigilance Combined Test Force received a Global Hawk Block 40 Aug. 6, on loan from Air Combat Command. Tail number 2035, from Grand Forks AFB, N.D., is jo...
 
 

NASA awards program analysis, Control Bridge III Contract

NASA has awarded the Program Analysis and Control III Bridge contract for support services to ASRC Research & Technology Solutions of Beltsville, Md. The cost-plus-fixed-fee, indefinite delivery/indefinite quantity basic contract has a minimum ordering value of $1 million and a maximum ordering value of $37 million, with a performance period beginning Aug. 30 through Feb....
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>