Tech

August 18, 2012

NASA ER-2 collects Perseids meteor shower dust

This Large Area Collector sensor is carried under the wing of a high-altitude NASA ER-2. When the aircraft reaches 65,000 feet altitude, the clam shell-like doors open to reveal pads covered with sticky oil that traps microscopic cosmic material.

NASA’s high-flying ER-2 science aircraft is looking deeper into the skies overhead the week of Aug. 13.

The aircraft is flying three eight-hour missions to collect cosmic dust during the Perseids meteor shower. Samples collected during the flights provide valuable information about the origin and history of the solar system.

ER-2 No. 809, carrying Large Area Collectors mounted under both wings, flies to an altitude of more than 65,000 feet. The pilot then activates the collectors’ clam shell-like doors revealing pads coated with a sticky, sterile silicone oil. The doors are closed as the aircraft descends, sealing the pads that are later sent to NASA’s Johnson Space Center in Houston for curation, preliminary characterization, and then made available to qualified scientists worldwide.

The Large Area Collector sensor is mounted under the wing of NASA’s ER-2 high-altitude aircraft as it awaits a cosmic dust collection mission. Collected samples provide valuable information about the origin and the history of the solar system.

The Perseids is an annual meteor shower visible from mid-July through mid-August, primarily in the Northern Hemisphere. Although the shower is visible to the human eye at night, the aircraft is collecting cosmic debris during daytime hours.

“The collection is timed to catch the particles after they have settled into the lower stratosphere,” said Mike Zolensky, a space scientist at NASA Johnson who has coordinated cosmic dust flights with these devices for more than 25 years.

NASA’s ER-2s are based at the Dryden Aircraft Operations Facility in Palmdale, Calif. The Large Area Collectors were developed in the 1980s by NASA’s Ames Research Center at Moffett Field, Calif., for Earth science research.

 




All of this week's top headlines to your email every Friday.


 
   
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>