Space

August 20, 2012

Fabrication of Northrop Grumman-built spacecraft for Webb Telescope moves forward

REDONDO BEACH, Calif. – The spacecraft that will carry NASA’s James Webb Space Telescope to its orbit nearly a million miles from Earth has completed a Critical Design Review for the structure that supports Webb’s data link to NASA’s ground station.

Northrop Grumman is under contract to NASA’s Goddard Space Flight Center in Greenbelt, Md., for the design and development of the telescope, sunshield and spacecraft.

Now ready for fabrication, the Webb spacecraft’s communications support structure stows and holds the communications antenna when folded for launch. When the telescope unfurls in space, the antenna is released and points to NASA’s Deep Space Network, transmitting data to the world’s scientists.

Another spacecraft structure, the solar array, has completed its preliminary design audit and moves into the detailed design phase. The spacecraft’s solar array supplies all electrical power to the science instruments, communications equipment and computers for the entire telescope. The solar array is the first component that deploys once the telescope separates from the launch vehicle and its performance is critical. Without power, there is no science mission.

“This progress represents a steady path forward on spacecraft subsystems,” said Andy Cohen, Webb spacecraft manager, Northrop Grumman Aerospace Systems. “We’ve accelerated the structural build of the spacecraft by four and a half months, and have completed qualification testing for the engineering model of the command and telemetry processor, our main onboard computer, responsible for all spacecraft operations and fine guidance of the telescope.”

Successor to the Hubble Space Telescope, the James Webb Space Telescope is the world’s next-generation space observatory. It will be the most powerful space telescope ever built. Webb will observe the most distant objects in the universe, provide images of the very first galaxies ever formed and study planets around distant stars. The Webb Telescope is a joint project of NASA, the European Space Agency and the Canadian Space Agency.

 

 




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>