Tech

September 21, 2012

Army announces greatest inventions of 2011

Tags:
Dan Lafontaine
Aberdeen Proving Ground, Md.

U.S. Army officials announced the winners of its greatest inventions competition Sept. 19.

A team of combat veteran non-commissioned officers, as well as U.S. Army Training and Doctrine Command field-grade officers, reviewed and voted for the Army Greatest Inventions of 2011.

Dale Ormond, director of the U.S. Army Research, Development and Engineering Command, commended the scientists and engineers for their efforts to empower, unburden and protect Soldiers.

“The contributions made by these teams promise to improve the well being of Soldiers and the Army’s capability to contribute to quality of life and our national security,” Ormond said. “All of the nominated inventions demonstrate significant contributions to the war fighter.

“The 2011 award winners demonstrated significant impact to Army capabilities, potential benefits outside of the Army, and inventiveness. This program’s unique selection process reflects the voice of the war fighter and insight into the future of Army equipment. The AGI awards are truly Soldiers’ Choice Awards.”

The awards will be presented during a ceremony in spring 2013.

The winners, in alphabetical order:

Spc. Nicholas Ketchen and Spc. Colt Corbin, mortarmen from Company C, 1st Battalion, 506th Infantry Regiment, 4th Brigade Combat Team, 101st Airborne Division, achieved a first in the U.S. Army history by firing a 120mm Mortar Precision Guided Munition for the first time in Afghanistan, and hitting within four meters of the target, on Forward Operation Base Kushamond, Afghanistan, March 26, 2011.

120mm Accelerated Precision Mortar Initiative Cartridge

A 120mm Global Positioning System-guided mortar cartridge provides infantry commanders with new precision-strike capability. It replaces the current fuse in the standard M934 HE round with modifications to the fuse well and fin configuration to provide low-cost guidance capability that significantly improves the mortar round accuracy. The GPS coordinates are input from the current mortar lightweight or standard mortar ballistic computers with the addition of a Precision Lightweight Universal Mortar Setter System. The key to its enhanced performance is the GPS acquisition time and ability to maintain tracking throughout the cartridge’s high angle of fire. (Source: U.S. Army Armament Research, Development and Engineering Center)

A helmet sensor and data retrieval system measures impact and pressure events continuously. This device is placed into the helmet, weighing only 2 ounces, to analyze the correlation between experienced head forces and Mild Traumatic Brain Injury. This will aid in determining whether a Soldier should seek immediate medical attention and aid in the long-term care of the Soldier. Using low power, the battery can last up to 12 months. The National Football League is interested in an exchange of information that could aid in development of future systems capable of targeting and measuring affects to specific parts of the human body.

Caiman Explosively Formed Penetrator Add-on-Armor Kits

An armor package is integrated into a Mine Resistant Ambush Protected vehicle with little modification to an existing armor package, protecting the driver and commander sides and mitigating the exposed area from explosively formed penetrators. The team used current panels, allowing for cost savings and quick replacement of damaged armor. The standard welded bosses were replaced with bolted bosses that reduced production time and eliminated warping of the aluminum plate without reducing performance. One hundred kits were requested for shipment to Iraq after successful installation in theater. The kit has had significant impact on survivability against targeted EFP attacks. (Source: U.S. Army Tank Automotive Research, Development and Engineering Center)

The M2A1 is an enhancement to the .50-Cal M2, including a modified barrel, barrel extension, barrel support, barrel handle, flash suppressor and a fixed headspace and timing configuration. The M2A1 is an automatic, recoil-operated, link-belt-fed, air-cooled, crew-served weapon; capable of firing single-shot and automatic; and capable of right- and left-hand feed. The enhancements increase durability and Soldier safety moving the headspace and timing adjustment task above the operator level, thereby minimizing malfunctions and injuries in the field.

Helmet Sensors

A helmet sensor and data retrieval system measures impact and pressure events continuously. This devise is placed into the helmet, weighing only 2 ounces, to analyze the correlation between experienced head forces and Mild Traumatic Brain Injury. This will aid in determining whether a soldier should seek immediate medical attention and aid in the long-term care of the Soldier. Using low power, the battery can last up to 12 months. The National Football League is interested in an exchange of information that could aid in development of future systems capable of targeting and measuring affects to specific parts of the human body. (Source: U.S. Army Natick Soldier Research, Development and Engineering Center)

A GPS-guided, inertial measurement unit-aided, fin-stabilized, 155mm projectile flies a ballistic trajectory during its ascending branch, then a guided trajectory during its descending branch to preprogrammed target coordinates. It provides precision guidance and dramatically improves accuracy to less than 10 meters compared with hundreds of meters for conventional artillery ammunition. This increased reliability increases the probability of destroying the target and decreases the number of rounds needed to fire. The range capability increases from 25.3 kilometers to 37.5 kilometers.

Level 2 Manned-Unmanned Teaming for the OH-58D Kiowa Warrior Helicopter

The L2MUM is a real-time system that can receive video and metadata in the common bands, within a long range, and is used by fielded unmanned aerial systems first fielded on the Kiowa Warrior aircraft. The video and metadata can be unencrypted and encrypted. The software provides the user with UAS location on a standard Falcon view moving map display along with the metadata, which provides the user better and quicker situational awareness further from the target and engagement. The L2MUM aircraft allows specific aviation attack assets to see and understand strategic objectives, receives and provides intelligence to and from varied ground elements and tactically brings destruction to specific targets. (Source: U.S. Army Aviation and Missile Research, Development and Engineering Center)

The Pelvic Protection System is in response to an increased threat of buried improvised explosive devises, providing protection from serious injuries to the pelvis, femoral arteries and lower abdominal organs in a blast or small fragmentation threat. It aids in protection against sand and debris injected into the wounds sustained from IEDs, which may result in complications and significant chance of infection. The Navy and Air Force have inquired about procuring on future contracts.

M2A1 Cal .50 Machine Gun

The M2A1 is an enhancement to the .50-calliber M2, including a modified barrel, barrel extension, barrel support, barrel handle, flash suppressor and a fixed headspace and timing configuration. The M2A1 is an automatic, recoil-operated, link-belt-fed, air-cooled, crew-served weapon; capable of firing single-shot and automatic; and capable of right- and left-hand feed. The enhancements increase durability and Soldier safety moving the headspace and timing adjustment task above the operator level, thereby minimizing malfunctions and injuries in the field. (Source: ARDEC)

M982 Excalibur Increment 1a-2, 155MM Extended Range Precision Guided Projectile

A GPS-guided, inertial measurement unit-aided, fin-stabilized, 155mm projectile flies a ballistic trajectory during its ascending branch, then a guided trajectory during its descending branch to preprogrammed target coordinates. It provides precision guidance and dramatically improves accuracy to less than 10 meters compared with hundreds of meters for conventional artillery ammunition. This increased reliability increases the probability of destroying the target and decreases the number of rounds needed to fire. The range capability increases from 25.3 kilometers to 37.5 kilometers. (Source: ARDEC)

OH-58D Common Missile Warning System

The OH-58D Common Missile Warning System provides missile warning and countermeasures for infrared guided missiles. This increases aircraft and Soldier survivability against guided-missile attacks. The technology detects a fired missile and then dispenses flares as a means to detour the missile away from the aircraft. (Source: AMRDEC)

Pelvic Protection System

The Pelvic Protection System is in response to an increased threat of buried improvised explosive devises, providing protection from serious injuries to the pelvis, femoral arteries and lower abdominal organs in a blast or small fragmentation threat. It aids in protection against sand and debris injected into the wounds sustained from IEDs, which may result in complications and significant chance of infection. The Navy and Air Force have inquired about procuring on future contracts. (Source: NSRDEC)

Precision Lightweight Universal Mortar Setter System

PLUMSS is a highly transportable, all-weather, rapid response, indirect fire control system that is capable of programming the world’s first precision guided 120mm mortar cartridge. It uses GPS for precision that can provide indirect fire support that decreases the ammunition expenditure rate, limits collateral damage and provides accurate first round effects on target. Commonality and interoperability among already fielded platforms eliminates the need for additional resources for training and sustainment while providing valuable lessons learned during development. (Source: ARDEC)

Soldier Plate Carrier System

The Soldier Plate Carrier System is a lightweight hard armor plate carrier system with a modular lightweight load carrying equipment attachment that has a quick release capability, which aids in reducing load, increases mobility and provides direct fire protection. The SPCS consists of an outer carrier with soft armor ballistic inserts and a cummerbund for better system stabilization and increased ballistic area of coverage around the torso. (Source: NSRDEC)

2011 Soldier Greatest Inventions Award Winner

Small Unit Tactical Light

SUTL lights up target areas when motion is detected by using a 12-volt DC motion sensor to operate an infrared light. The motion sensor has a day/night sensor and switch to conserve battery life. A thermal imaging sensor is also encased with the motion sensor (motion must be made by something with substantial heat such as a person, large animal or vehicle). An infrared light allows the target or enemy to be known to friendly forces with night vision goggles while not alerting the target. (Source: 10th Mountain Division [Light Infantry])




All of this week's top headlines to your email every Friday.


 
 

 

ONR features technology for Marines of future

From virtual training to laser weapons, the Office of Naval Research is showcasing a range of technologies at Modern Day Marine exposition Sept. 23-25 that will prepare Marines as they continue to face an increasingly complex security landscape. ONR program officers will be in booth no. 2305 during the event, held at Marine Corps Base...
 
 
University of Alaska-Fairbanks photograph by Chris Larsen

NASA airborne campaigns focus on climate impacts in Arctic

University of Alaska-Fairbanks photograph by Chris Larsen Changes in more than 130 Alaskan glaciers are being surveyed by scientists at the University of Alaska-Fairbanks in a DHC-3 Otter as part of NASA’s multi-year Oper...
 
 
NASA/SSAI photograph by Edward Winstead

ACCESS II confirms jet biofuel burns cleaner

NASA/ORAU photograph by Richard Moore NASA’s DC-8 research aircraft leads one of the ACCESS II sampler aircraft across the early morning California sky.   Flying high above the California desert, NASA researchers rec...
 

 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 
 
NASA photograph by David Alexander

NASA MQ-9 remotely piloted aircraft completes visual, radar mission in Hawaii

NASA photograph “Ikhana,” NASA’s MQ-9 remotely piloted research aircraft, carries a maritime radar in a specialized centerline pod during a flight to check out systems prior to the aircraft’s deployment ...
 
 
NASA photograph by Tom Tschida

NASA Armstrong’s space shuttle Mate-Demate Device coming down

NASA photograph by Tom Tschida The space shuttle Mate-Demate Device that stood as an iconic symbol of NASA’s now-concluded Space Shuttle Program at NASA Armstrong Flight Research Center for 38 years is being dismantled af...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>