Business

October 9, 2012

Honeywell’s latest Spectra Shield Ballistic Material toughens, lightens British combat vehicle

Honeywell announced Oct. 8 that its second-generation Spectra ShieldÆ ballistic material is being used to armor Foxhound vehicles, manufactured by General Dynamics Land Systems Force Protection Europe, for the British Armed Forces. The vehicles are currently being shipped for use in Afghanistan.

The Spectra Shield materials are more than 50 percent lighter than traditional vehicle armor materials, making the vehicles easier to transport and maneuver. The improved agility of the vehicles can help them survive even the toughest missions.

“Honeywell’s state of the art materials play an integral role in the survivability of the Foxhound vehicles,” said Col. Nick Wills, Assistant Director Equipment Operations for the United Kingdom Army Headquarters. “Spectra Shield’s very low weight allows the Foxhound to be a very agile and survivable platform.”

The Foxhound with Honeywell’s Spectra Shield materials underwent more than 12 months of rigorous blast and mobility testing before being chosen by the United Kingdom Ministry of Defence. The protective qualities of Spectra Shield help the Foxhound significantly improve protection of personnel against roadside bombs and improvised explosive devices.

“Honeywell Spectra Shield lowers the overall vehicle weight of the Foxhound while improving the vehicle’s ability to withstand the increased threats seen in combat today,” said Tim Swinger, global business manager of Honeywell’s Advanced Fibers and Composites business. “The decrease in weight helps to decrease each vehicle’s maintenance and fuel costs, and can limit the number of re-supply trips through dangerous routes.”

For more than 20 years, Honeywell’s materials have been used in advanced armor systems for a wide range of ballistic protection and security applications ñ from bullet-resistant vests, breastplates, and helmets to combat vehicles and military aircraft ñ where lightweight solutions and durability are critical. Honeywell ballistic materials protect men and women who serve in militaries and law enforcement agencies around the world.

Honeywell’s patented Spectra Shield products are manufactured by bonding parallel strands of fiber in place with an advanced resin system. In addition to SpectraÆ fiber, Honeywell adapts this technology to other fibers.

Spectra fiber is made from ultra-high molecular weight polyethylene using a patented gel-spinning process. The fiber exhibits high resistance to chemicals, water, and ultraviolet light. It has excellent vibration damping, flex fatigue and internal fiber-friction characteristics. It also has up to 60 percent greater specific strength than aramid fiber.

In addition to armor, Spectra fiber also can be used for high-performance marine applications such as lifting and mooring lines, industrial slings and security netting, as well as for novel curtains used to protect windows and doors during hurricanes.

Honeywell maintains an active Spectra fiber and ballistic material research and development program aimed to meet increased demand for its high performance armor materials.




All of this week's top headlines to your email every Friday.


 
 

 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 
 

Boeing breaks ground in St. Louis for new composites center

Boeing Dec. 16 began construction in St. Louis of a new 367,000-square-foot facility in which it will build parts for the newest member of its 777 commercial airplanes family, the 777X.  About 700 new jobs will be created for the 777X work. Construction should be complete in 2016, with work on 777X wing and empennage...
 

 

Raytheon, Bell conduct first missile launch from V-22

Raytheon and Bell Helicopter have completed two successful launches of the Griffin B missile from a Bell Boeing V-22 Osprey multi-mission aircraft at Yuma Proving Ground, Ariz. As an industry funded effort with Bell’s Xworx, Raytheon demonstrated the simplicity of integrating the Griffin B missile onto the V-22 platform. “This is the first time a...
 
 

Raytheon gallium nitride technology validated for space applications

Satellites may soon carry Raytheon’s Gallium Nitride technology into Earth orbit. Raytheon has successfully validated its GaN Monolithic Microwave Integrated Circuit technology for use in space-bound equipment. Raytheon GaN MMICs, fabricated at its Andover, Massachusetts foundry, demonstrated the radiation hardness required for space through Single Event Burn-out and Total Ionizing Dose t...
 
 
Air Force photograph by A1C Alexander Guerrero

317th AG delivers during massive JFE

Air Force photograph by A1C Alexander Guerrero Eleven C-130H Herculesí from various Air National Guard units and thirteen C-130J Super Herculesí from the 317th Airlift Group at Dyess Air Force Base, Texas, prepare to take off...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>