Tech

October 12, 2012

NASA, IHMC develop robotic exoskeleton for space, possible use on Earth

A new robotic space technology spinoff derived from NASA’s Robonaut 2 project someday may help astronauts stay healthier in space and aid paraplegics in walking here on Earth.

Robonaut 2, the first humanoid robot in space, currently is working with astronauts aboard the International Space Station.

NASA and The Florida Institute for Human and Machine Cognition of Pensacola, Fla., have jointly developed a robotic exoskeleton called X1. The 57-pound device is a robot that a human could wear over his or her body either to assist or inhibit movement in leg joints.

In the inhibit mode, the robotic device would be used as an in-space exercise machine to supply resistance against leg movement. The same technology could be used in reverse on the ground, potentially helping some individuals walk for the first time.

“Robotics is playing a key role aboard the International Space Station and will be critical in our future human exploration of deep space,” said Michael Gazarik, director of NASA’s Space Technology Program.”What’s extraordinary about space technology and our work with projects like Robonaut are the unexpected possibilities space tech spinoffs may have right here on Earth. It’s exciting to see a NASA-developed technology might one day help people with serious ambulatory needs to begin to walk again, or even walk for the first time. That’s the sort of return on investment NASA is proud to give back to America and the world.”

Worn over the legs with a harness that reaches up the back and around the shoulders, X1 has 10 degrees of freedom, or joints – four motorized joints at the hips and the knees, and six passive joints that allow for sidestepping, turning and pointing, and flexing a foot. There also are multiple adjustment points, allowing the X1 to be used in many different ways.

X1 currently is in a research and development phase, where the primary focus is development, evaluation and improvement of the technology. NASA is examining the potential for the X1 as an exercise device to improve crew health both aboard the space station and during future long-duration missions to an asteroid or Mars. Without taking up valuable space or weight during missions, X1 could replicate common crew exercises, which are vital to keeping astronauts healthy in microgravity. In addition, the device has the ability to measure, record and stream back in real-time data to flight controllers on Earth, giving doctors better insight into the crew’s exercise.

X1 also could provide a robotic power boost to astronauts as they work on the surface of distant planetary bodies. Coupled with a spacesuit, X1 could provide additional force when needed during surface exploration, providing even more bang for its small bulk.

Here on Earth, IHMC is interested in developing and using X1 as an assistive walking device. Using NASA technology and walking algorithms developed at IHMC, X1 has the potential to produce high torques to allow for assisted walking over varied terrain, as well as stair climbing. Preliminary studies using X1 for this purpose have already started at IHMC.

“We greatly value our collaboration with NASA,” said Ken Ford, IHMC’s director and CEO. “The X1’s high-performance capabilities will enable IHMC to continue performing cutting-edge research in mobility assistance and expand into rehabilitation.”

The potential of X1 extends to other applications, including rehabilitation, gait modification and offloading large amounts of weight from the wearer. Preliminary studies by IHMC have shown X1 to be more comfortable, easier to adjust, and easier to put on than older exoskeleton devices. Researchers plan on improving on the X1 design, adding more active joints to areas such as the ankle and hip, increasing the potential uses for the device.

Designed in an extremely short timeframe, X1 came from technology developed for Robonaut 2 and IHMC’s Mina exoskeleton. NASA’s work in robotic exoskeleton systems complements work done by other government agencies, such as the Defense Advanced Research Project Agency’s Exoskeletons for Human Performance Augmentation Program.

NASA’s Game Changing Development Program, part of NASA’s Space Technology Program, funds the X1 work. NASA’s Space Technology Program focuses on maturing advanced space technologies that may lead to entirely new approaches for space missions and solutions to significant national needs.

 




All of this week's top headlines to your email every Friday.


 
 

 

Headlines December 17, 2014

News: U.S. Air Force tanker platform slated for year-end debut - Boeing is planning for first flight of its 767-2C – upon which the U.S. Air Force’s new KC-46 tanker will be based – by year’s end, six months late. Northrop Grumman wins $657.4 million deal to supply drones to South Korea - Northrop Grumman has won...
 
 

NASA launches new Micro-g NExT for undergraduates

NASA is offering undergraduate students an opportunity to participate in a new microgravity activity called Micro-g Neutral Buoyancy Experiment Design Teams. The deadline for proposals is Jan. 28, 2015. Micro-g NExT challenges students to work in teams to design and build prototypes of spacewalking tools to be used by astronauts for spacewalk training in the...
 
 
launch1

Storm fails to quench liftoff of secret reconnaissance satellite

The fiery launch of an Atlas V (541), among the most powerful of the venerable Atlas family, briefly dispelled the gloom over Californiaís Central Coast on the evening of Dec. 12. A team of personnel from United Launch Allianc...
 

 
Coast Guard photograph

Navy demonstrates unmanned helicopter operations aboard Coast Guard cutter

http://static.dvidshub.net/media/video/1412/DOD_102145893/DOD_102145893-512×288-442k.mp4 Coast Guard photograph An MQ-8B Fire Scout UAS is tested off the Coast Guard Cutter Bertholf near Los Angeles, Dec. 5 2014. The Coast...
 
 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>