Space

October 18, 2012

New Curiosity instruments show surprising Mars rock

NASA photograph

The first rock the new Curiosity instruments touched have presented a more varied composition than expected from previous missions. The rock also resembles some unusual rocks from Earth’s interior.

The rover team used two instruments on Curiosity to study the chemical makeup of the football-size rock called Jake Matijevic, to honor a pioneer JPL Mars rover designer.

The results support some surprising recent measurements and provide an example of why identifying rocks’ composition is such a major emphasis of the mission. Rock compositions tell stories about unseen environments and planetary processes.

“This rock is a close match in chemical composition to an unusual but well-known type of igneous rock found in many volcanic provinces on Earth,” said Edward Stolper of the California Tech who is a Curiosity co-investigator. “With only one Martian rock of this type, it is difficult to know whether the same processes were involved, but it is a reasonable place to start thinking about its origin.”

On Earth, rocks with composition like this typically come from processes in the planet’s mantle beneath the crust, from crystallization of relatively water-rich magma at elevated pressure. Jake was the first rock analyzed by the rover’s arm-mounted Alpha Particle X-Ray Spectrometer instrument and about the thirtieth rock examined by the Chemistry and Camera (ChemCam) instrument.

Two penny-size spots on Jake were analyzed Sept. 22 by this rover’s improved and faster version of earlier APXS devices on previous Mars rovers, which have examined hundreds of rocks. Thus scientists have available a comparison library of Mars rocks.

“Jake is kind of an odd Martian rock,” said APXS Principal Investigator Ralf Gellert of the University of Guelph in Ontario, Canada. “It’s high in elements consistent with the mineral feldspar, and low in magnesium and iron.”

Also, ChemCam found unique compositions at each of 14 target points on the rock, hitting different mineral grains within it. “ChemCam had been seeing compositions suggestive of feldspar since August, and we’re getting closer to confirming that now with APXS data, although there are additional tests to be done,” said ChemCam Principal Investigator Roger Wiens of Los Alamos National Lab.

Jake’s examination is the first comparison on Mars using both APXS results the ChemCam, which shoots laser pulses from the top of the rover’s mast. The wealth of information from the two instruments checking chemical elements in the same rock is just a preview. Curiosity also carries analytical laboratories inside the rover to provide other composition information about powder samples from rocks and soil. The mission is progressing toward getting the first soil sample into those analytical instruments during a “sol,” or Martian day.

 

Martian sand sampling progressing

 

Commands have sent to Curiosity instructing the rover to collect a third scoop of soil from the “Rocknest” site of windblown Martian sand and dust.

Pending evaluation of this Sol 69 (Oct. 15, 2012) scooping, a sample from the scoopful is planned as the first sample for delivery, a few days latter, to one of the rover’s internal analytical instruments, the Chemistry and Mineralogy (CheMin) instrument.

A later scoopful will become the first solid sample for delivery to the rover’s other internal analytical instrument, the Sample Analysis at Mars instrument.

The rover’s second scoopful, collected on Sol 66, was intentionally discarded on Sol 67 due to concern about particles of bright material seen in the hole dug by the scooping. Other small pieces of bright material in the Rocknest area have been assessed as debris from the spacecraft. The science team did not want to put spacecraft material into the rover’s sample-processing mechanisms.

Also, the first two scoops were used to completely scour the interior of the sample delivery mechanisms of a suspected film of material that may have been brought up from earth.

Confidence for going ahead with the third scooping was based on a new assessment that other bright particles in the area are native Martian material. One factor in that consideration is seeing some bright particles embedded in clods of Martian soil. Further investigations of the bright particles were planned, including some imaging in the Sol 69 plan. Sol 69, in Mars local mean solar time at Gale Crater, ended at 5:01 a.m. Oct. 16, PDT.

 




All of this week's top headlines to your email every Friday.


 
 

 

Headlines December 17, 2014

News: U.S. Air Force tanker platform slated for year-end debut - Boeing is planning for first flight of its 767-2C – upon which the U.S. Air Force’s new KC-46 tanker will be based – by year’s end, six months late. Northrop Grumman wins $657.4 million deal to supply drones to South Korea - Northrop Grumman has won...
 
 

NASA launches new Micro-g NExT for undergraduates

NASA is offering undergraduate students an opportunity to participate in a new microgravity activity called Micro-g Neutral Buoyancy Experiment Design Teams. The deadline for proposals is Jan. 28, 2015. Micro-g NExT challenges students to work in teams to design and build prototypes of spacewalking tools to be used by astronauts for spacewalk training in the...
 
 
launch1

Storm fails to quench liftoff of secret reconnaissance satellite

The fiery launch of an Atlas V (541), among the most powerful of the venerable Atlas family, briefly dispelled the gloom over Californiaís Central Coast on the evening of Dec. 12. A team of personnel from United Launch Allianc...
 

 
Coast Guard photograph

Navy demonstrates unmanned helicopter operations aboard Coast Guard cutter

http://static.dvidshub.net/media/video/1412/DOD_102145893/DOD_102145893-512×288-442k.mp4 Coast Guard photograph An MQ-8B Fire Scout UAS is tested off the Coast Guard Cutter Bertholf near Los Angeles, Dec. 5 2014. The Coast...
 
 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>