Tech

October 26, 2012

NASA selects early stage innovation proposals from 10 universities

NASA has selected 10 university-led proposals for study of innovative, early-stage space technologies designed to improve shielding from space radiation, spacecraft thermal management and optical systems.

The 1-year grants are worth approximately $250,000 each, with an additional year of research possible.

Each of these technology areas requires dramatic improvements over existing capabilities for future science and human exploration missions. Early stage, or low technology readiness level concepts, could mature into tools that solve the difficult challenges facing future NASA missions. The selected areas address the high-priority technical needs as identified by the National Research Council in its recent report “NASA Space Technology Roadmaps and Priorities: Restoring NASA’s Technological Edge and Paving the Way for a New Era in Space.”

“NASA’s Space Technology Program is moving out on solving the cross-cutting technology challenges we face as we move beyond low-Earth orbit and head to an asteroid, Mars and beyond,” said Michael Gazarik the program’s director at NASA Headquarters in Washington. “Our science and human deep space missions need advancements in these technology areas to enable exploration of space. We’re excited and proud to partner with the best minds from American universities to take on these tough technical challenges.”

Universities selected for early stage innovation grants and the names of their proposals are:

  • Case Western Reserve University, Cleveland; “Heat rejection system for thermal management in space utilizing a planar variable-conductance heat pipe”
  • Colorado State University, Fort Collins; “Computational approaches for developing active radiation dosimeters for space applications based on new paradigms for risk assessment”
  • Georgia Institute of Technology, Atlanta; “Design and development of a next generation high capacity, light weight, 20-K pulse tube cryocooler for active thermal control on future space exploration missions”
  • Pennsylvania State University, University Park; “Integrated control electronics for adjustable X-ray optics”
  • Purdue University, West Lafayette, Ind.; “Adaptable single active loop thermal control system for future space missions”
  • University of Alabama in Huntsville; “Advanced scintillating fiber technology in high energy neutron spectrometers for exploration”
  • University of Arizona, Tucson; “Wavefront control for high performance coronagraphy on segmented and centrally obscured telescopes”
  • University of Houston; “High hydrogen content nanostructured polymer radiation protection system”
  • University of New Hampshire, Durham; “Small active readout device for dose spectra from energetic particles and neutrons (DoSEN)”
  • Oregon State University, Corvallis; “Enabling self-propelled condensate flow during phase-change heat rejection using surface texturing”

 

The selected efforts will explore new approaches to protect crews from ionizing space radiation and develop new technologies to measure and characterize the ionizing particle environment wherever humans may travel beyond Earth orbit.

Researchers also will explore technologies to greatly increase the capability to store cryogenic fluids and investigate heat rejection technologies capable of operating reliably and efficiently through a wide range of thermal conditions.

In addition, researchers will develop technologies that could lead to new classes of X-ray telescopes and explore techniques aimed at direct imaging and characterization of Earth-like planets orbiting other stars.

Second year funding for these grants will be contingent on technical progress and the availability of appropriated funds. The selections are part of NASA’s Space Technology Research Grants Program. The program is designed to accelerate the development of technologies originating from academia that support the future science and exploration needs of NASA, other government agencies and American industry. The program is part of NASA’s Space Technology Program, which is innovating, developing, testing, and flying technology for use in NASA’s future missions and the greater aerospace community.

 




All of this week's top headlines to your email every Friday.


 
 

 
University of Rhode Island photograph by Tom Glennon

NASA kicks off field campaign to probe ocean ecology, carbon cycle

University of Rhode Island photograph by Tom Glennon The Research Vessel Endeavor is the floating laboratory that scientists will use for the ocean-going portion of the SABOR field campaign this summer. NASA embarks this week o...
 
 
NASA photograph by Carla Thomas

NASA’s high-flying laser altimeter to check out summer sea ice, more

NASA photograph by Carla Thomas This summer, the Multiple Altimeter Beam Experimental Lidar, or MABEL, will fly above Alaska and the Arctic Ocean on one of NASA’s ER-2 high-altitude aircraft. Sea ice in summer looks dramatica...
 
 
SOFIA

Outer space to inner space: SOFIA inside Lufthansa Technik hangar

NASA photograph by Jeff Doughty NASA’s Stratospheric Observatory for Infrared Astronomy is shown inside the Lufthansa Technik hangar in Hamburg, Germany where it is beginning its decadal inspection. Flight, aircraft maint...
 

 
NASA photograph by Tony Landis

New life for an old bird: NASA’s F-15B test bed gets new engines

NASA photograph NASA’s F-15B flight research test bed carries shuttle thermal insulation panels on its underbelly during a research flight in 2005. NASA Armstrong’s F-15B aeronautics research test bed, a workhorse at th...
 
 
NASA photograph by Tom Tschida

Towed glider benefits from center’s new 3-D printer capability

NASA photograph by Tom Tschida The major components of NASA Armstrong’s new high-resolution 3-D additive manufacturing printer occupy a shelf in the center’s subscale aircraft research lab. Robert “Red” ...
 
 
NASA photograph by Emmett Given

NASA completes testing on 3-D printer

NASA photograph by Emmett Given United Space Alliance engineer Cynthia Azzarita, left, and Boeing Company engineer Chen Deng, members of the Human Factors Integration Team at NASA’s Johnson Space Center, conduct a “...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>