Business

November 14, 2012

XCOR announces ATK as Lynx Mark I wing detailed design, build contractor


MOJAVE, Calif. – XCOR Aerospace announced Nov. 14 that it has issued the initial phase of a two-phase contract to ATK’s Aerospace Structures Division for the detailed design and manufacture of the Lynx Mark I suborbital reusable launch vehicle wings and control surfaces.

This announcement represents a critical milestone in the march toward assembly, test and entry into commercial service of the Lynx.

“This partnership with XCOR will provide unique insights and innovations,” said Andrew Jackson, vice president of ATK’s Aerospace Structures Division Launch Segment. “ATK is honored to continue our heritage in creating composite manufacturing solutions for spaceflight and excited to engage in this commercial environment with XCOR.”

“As an established industry leader it is only natural that XCOR sought to work with ATK as a key collaborator in the development of Lynx wings,” said XCOR Chief Executive Officer Jeff Greason. “Our engagements with ATK impressed me from the start, not only due to their position as a leader in the industry, but through their immediate grasp of the unique challenges we face in the construction of Lynx wings. The story of Lynx is the story of sound design and reliable engineering. We could not be more thrilled to work with ATK.”

XCOR Chief Operating Officer Andrew Nelson added that “until recently NewSpace companies and established aerospace primes like ATK often had minimal interaction with companies like XCOR as the subcontractor. With this effort we are establishing a model of how smaller NewSpace companies may utilize established government primes as our suppliers; ATK has demonstrated they are nimble, cost effective and can leverage deep experience from prior larger projects.”

The initial wing and control surface design has been developed by XCOR to rigorous design standards to enable the craft to perform tens of thousands of flights to and from suborbital altitudes exceeding 100 kilometers. ATK will create a detailed design ready for manufacture, working with structural and flutter analysis experts from Quartus Engineering in San Diego, Ca. The wings will be installed on the Lynx Mark I, which is the prototype of the Lynx family of suborbital RLVs from XCOR; the production models are called Lynx Mark II.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines April 18, 2014

Business: Lockheed to Lose 17 F-35s Under Automatic Pentagon Cuts - Pentagon will cut 17 of the 343 F-35 fighters it planned to buy from Lockheed Martin in fiscal 2016 through 2019 unless Congress repeals automatic budget cuts, according to a new Defense Department report. DOD looking for ways not to break MH-60R helo deal - The...
 
 

News Briefs April 18, 2013

U.S. military deaths in Afghanistan at 2,177 As of April 15, 2014, at least 2,177 members of the U.S. military had died in Afghanistan as a result of the U.S.-led invasion of Afghanistan in late 2001, according to an Associated Press count. At least 1,802 military service members have died in Afghanistan as a result...
 
 
LM-F35-hours

F-35 fleet surpasses 15,000 flying hours

The Lockheed Martin F-35 Lightning II fleet recently surpassed 15,000 flight hours, marking a major milestone for the program.  “Flying 15,000 hours itself demonstrates that the program is maturing, but what I think is e...
 

 
nasa-cassini

NASA Cassini images may reveal birth of new Saturn moon

NASA’s Cassini spacecraft has documented the formation of a small icy object within the rings of Saturn that may be a new moon, and may also provide clues to the formation of the planet’s known moons. Images taken w...
 
 

NASA completes LADEE mission with planned impact on Moon’s surface

Ground controllers at NASA’s Ames Research Center in Moffett Field, Calif., have confirmed that NASA’s Lunar Atmosphere and Dust Environment Explorer spacecraft impacted the surface of the moon, as planned, between 9:30 and 10:22 p.m., PDT, April 17. LADEE lacked fuel to maintain a long-term lunar orbit or continue science operations and was intentionally sent...
 
 
Photograph courtesy of NASA Ames/SETI Institute/JPL-Caltech

NASA’s Kepler telescope discovers first Earth-size planet in ‘habitable zone’

Photograph courtesy of NASA Ames/SETI Institute/JPL-Caltech Kepler-186f resides in the Kepler-186 system about 500 light-years from Earth in the constellation Cygnus. The system is also home to four inner planets, seen lined up...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>