Business

November 16, 2012

Boeing 737 MAX achieves ‘firm concept’


Boeing has finished defining in broad terms its newest single-aisle airplane, the 737 MAX, recently completing a major milestone in development known as ‘Firm Concept’.

“The program has achieved this development milestone by defining the significant changes needed to deliver the performance we’ve committed to our customers,” said Beverly Wyse, vice president and general manager 737 program. “The team has a firm plan in place to incorporate all the changes necessary to realize a 13 percent fuel-use reduction within the scope and schedule of the program.”
Fuel-use reduction changes include new LEAP-1B engines from CFM International, a redesigned tail cone and Advanced Technology winglets. Other changes allow these fuel-saving features to be integrated into the overall airplane design.

Boeing also decided to incorporate limited systems changes to the 737 MAX. These include an electronic bleed air system that will be supplied by Honeywell and large-format displays, supplied by Rockwell Collins, for the flight deck of the 737 MAX.

“In keeping with our commitment to customers to continuously improve the 737, we also are making an investment in the future capability of the 737 MAX flight deck with the new, more advanced displays,” said Wyse.

The 737 MAX flight deck will have four new large displays with significant growth capability while maintaining a common look-and-feel with the Next-Generation 737 display formats that preserves commonality with training across the 737 family.

“With large-format displays we can offer our customers future capability in the flight deck as pilot and training needs evolve, giving the 737 MAX a competitive advantage and 737 MAX operators even greater value,” said Wyse.

The team also has defined the high-speed aerodynamic lines for the 737 MAX. Through analysis and testing conducted in high- and low-speed wind tunnels, the 737 MAX design team has further refined the geometric shape of the airplane, eliminating the need for the small bump on the nose-gear door that appeared in earlier design iterations.

“Removal of the bump demonstrates how far our design work has progressed,” said Michael Teal, chief project engineer, 737 MAX.
With Firm Concept, the factory plan for the 737 MAX also has been defined. The factory plan includes a 737 MAX transition line where the initial 737 MAX airplanes will be assembled before integrating the new airplane into the existing 737 production lines in Renton, Wash.

“The 737 MAX remains on track for first delivery in 2017,” said Teal. “Now we are focused on the finer details of the configuration and we are confident we’ll be ready to begin detailed design in mid-2013.”




All of this week's top headlines to your email every Friday.


 
 

 

Headlines July 31, 2015

News: Carter: Military leaders could arm more troops at home – Following the recent fatal shooting of four Marines and a sailor in Tennessee, Defense Secretary Ash Carter is ordering the military services to consider new policies that would enhance security for troops at home, including potentially arming more personnel.   Business: DOD weighs supplier base,...
 
 

News Briefs July 31, 2015

U.S. delivering eight newer F-16 warplanes to Egypt The United States Embassy in Cairo says the U.S. is delivering eight newer F-16 warplanes to Egypt as part of an ongoing military support package. It says in a July 30 statement that the aircraft, of the current Block 52 production variant, will be flown in from...
 
 
Lockheed Martin photograph

Lockheed Martin successfully tests design changes for Orion spacecraft’s fairing separation system

Lockheed Martin photograph A protective panel for Orion’s service module is jettisoned during testing at Lockheed Martin’s Sunnyvale, California facility. This test series evaluated design changes to the spacecraft’s fair...
 

 

Australian company to provide parts for initial production of Triton UAS

Northrop Grumman has awarded the first Australian supplier contract for the U.S. Navy’s MQ-4C Triton unmanned aircraft system initial production lot to Ferra Engineering. Brisbane-based Ferra Engineering will manufacture mechanical sub-assemblies for the first four Triton air vehicles including structural components. “At Northrop Grumman it’s very important to not only develop...
 
 
Boeing photograph

CH-46 ‘Phrog’ makes its last hop

Boeing photograph The CH-46 Sea Knight helicopter commonly known as the “Phrog,” is set to retire and to be flown one last time by Reserve Marine Medium Helicopter Squadron (HMM) 774 on Aug. 1. The CH-46 Sea Knight is a med...
 
 

Insitu awarded LRIP Lot IV RQ-21A Blackjack Systems contract

Under the terms of its latest contract, Insitu will build six RQ-21A Blackjack systems for the U.S. Navy and Marine Corps. The $78-million Small Tactical Unmanned Aircraft Systems Lot IV Low Rate Initial Production contract is the latest event in the program’s progression toward the Initial Operational Test and Evaluation phase.   “This award will...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>