In the news...

November 21, 2012

Lockheed Martin delivers three F-35Bs to the U.S. Marine Corps


Three Lockheed Martin F-35B short takeoff/vertical landing aircraft were officially delivered to the U.S. Marine Corps during ceremonies at Marine Corps Air Station Yuma, Ariz., Nov. 20.

The three jets are assigned to Marine Fighter Attack Squadron 121 residing with the host Marine Aircraft Group 13.

ìFor more than 50 years, it has been our mission to support the Marine Corps mission, and weíre honored to deliver the first three F-35B STOVL aircraft to Marine Fighter Attack Squadron 121,î said Bob Stevens, Lockheed Martin chairman and chief executive officer. ìThe F-35B is the worldís only 5th generation, supersonic, stealthy combat aircraft that can also hover, take off and land virtually anywhere Marines are in action. Through the hard work and dedication of the military and contractor team, the F-35B will define the future of Marine Corps aviation.î
Official welcoming ceremonies at Yuma marked the handover of the jets to the Marines. The delivery of the first three operational-coded 5th generation F-35B STOVL fighters marks the beginning of STOVL tactical operational training at Air Station Yuma.

These three aircraft increase the number of STOVL aircraft delivered to the Marine Corps to 16 and bring the total number of F-35s delivered in 2012 to 20. Currently, 13 Marine Corps STOVLs are assigned to the 2nd Marine Aircraft Wing’s Marine Fighter/Attack Training Squadron 501 at Eglin AFB, Fla., supporting pilot and maintainer training.

The F-35 Lightning II is a 5th generation fighter, combining advanced stealth with fighter speed and agility, fully fused sensor information, network-enabled operations and advanced sustainment. Three distinct variants of the F-35 will replace the A-10 and F-16 for the U.S. Air Force, the F/A-18 for the U.S. Navy, the F/A-18 and AV-8B Harrier for the U.S. Marine Corps, and a variety of fighters for at least nine other countries.

Lockheed Martin is developing the F-35 with its principal industrial partners, Northrop Grumman and BAE Systems.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>