Space

December 14, 2012

NASA progressing toward first launch of Orion spacecraft

Recent engineering advances by NASA and its industry partners across the country show important progress toward Exploration Flight Test-1 (EFT-1), the next step to launching humans to deep space.

The uncrewed EFT-1 mission, launching from NASA’s Kennedy Space Center in Florida in 2014, will test the re-entry performance of the agency’s Orion capsule, the most advanced spacecraft ever designed, which will carry astronauts farther into space than ever before.

“These recent milestones are laying the foundation for our first flight test of Orion in 2014,” said Dan Dumbacher, deputy associate administrator for exploration systems development at NASA Headquarters in Washington. “The work being done to prepare for the flight test is really a nationwide effort and we have a dedicated team committed to our goal of expanding the frontier of space.”

A tool that will allow the titanium skeleton of the Orion heat shield to be bolted to its carbon fiber skin is at the Denver facility of the spacecraft’s prime contractor Lockheed Martin. This will enable workers to begin assembling the two pieces of the heat shield. Almost 3,000 bolts are needed to hold the skeleton to the skin. A special stand was built to align the skin on the skeleton as holes for the bolts are drilled. Work to bolt the skeleton to the skin will be completed in January. The heat shield then will be shipped to Textron Defense Systems near Boston where the final layer, an ablative material very similar to that used on the Apollo spacecraft, will be added. The completed heat shield is scheduled to be ready for installation onto the Orion crew module at Kennedy next summer.

To test the heat shield during EFT-1′s re-entry, Orion will travel more than 3,600 miles above Earth’s surface, 15 times farther than the International Space Station’s orbital position. This is farther than any spacecraft designed to carry humans has gone in more than 40 years. Orion will return home at a speed almost 5,000 mph faster than any current human spacecraft.

This week, engineers at NASA’s Marshall Space Flight Center in Huntsville, Ala., received materials to begin manufacturing the adapter that will connect the Orion capsule to a United Launch Alliance Delta IV heavy-lift rocket for EFT-1. Two forward and two aft rings will be welded to barrel panels to form two adapters. This adapter design will be tested during EFT-1 for use during the first launch of NASA’s next heavy-lift rocket, the Space Launch System, in 2017. SLS will launch NASA’s Orion spacecraft and other payloads beyond low Earth orbit, providing an entirely new capability for human exploration.

Data from the adapter on the flight test will provide Marshall engineers with invaluable experience developing hardware early in the design process. Designing the adapter once for multiple flights also provides a cost savings.

Of the two adapters welded at Marshall, one will attach Orion to the Delta IV heavy-lift rocket used for EFT-1. The other adapter will be a structural test article to gain knowledge on the design.

NASA’s Ground Systems Development and Operations Program also has passed a major agency review that lays the groundwork at Kennedy to support future Orion and SLS launches. The GSDO Program completed a combined system requirements review and system definition review, in which an independent board of technical experts from across NASA evaluated the program’s infrastructure specifications, budget and schedule. The board confirmed GSDO is ready to move from concept

development to preliminary design. The combination of the two assessments represents a fundamentally different way of conducting NASA program reviews. The team is streamlining processes to provide the nation with a safe, affordable and sustainable launch facility.

The GSDO program last week also led the third Stationary Recovery Test Working Group session in Norfolk, Va. The team presented to the U.S. Navy detachment that will recover the capsule during EFT-1 a complete list of tasks required to accomplish stationary recovery test objectives. The working group outlined the plan for roles and responsibilities to accomplish required test procedures. Included in these presentations were the commanding officer of the USS Mesa Verde and the fleet forces command director of operations, who both expressed complete support for the test.

 




All of this week's top headlines to your email every Friday.


 
 

 
lm-orion3

Orion spacecraft transfers To launch abort system facility

https://www.youtube.com/watch?v=j68mszdhTmY NASA and Lockheed Martin have finished fueling the Orion spacecraft with ammonia, hydrazine and high pressure helium at Kennedy Space Center’s Payload Hazardous Servicing Facili...
 
 

NASA telescopes find clear skies, water vapor on exoplanet

Astronomers using data from three of NASA’s space telescopes – Hubble, Spitzer and Kepler – have discovered clear skies and steamy water vapor on a gaseous planet outside our solar system. The planet is about the size of Neptune, making it the smallest planet from which molecules of any kind have been detected. “This discovery...
 
 
NASA photograph by Aubrey Gemignani

New crew launches to space station to continue scientific research

NASA photgoraph Three crew members are heading to the International Space Station after launching in a Soyuz spacecraft from the Baikonur Cosmodrome in Kazakhstan at 4:25 p.m., EDT, Sept. 25. Three crew members representing the...
 

 

NASA expands commercial space program, requests proposals for IS resupply

On the heels of awarding groundbreaking contracts to U.S. commercial space companies to ferry American astronauts to the International Space Station, NASA has released a request for proposals for the next round of contracts for private-sector companies to deliver experiments and supplies to the orbiting laboratory. Under the Commercial Resupply Services 2 RFP, NASA intends...
 
 

ATK offers solid solution to U.S. Air Force’s RD-180 replacement request

ATK has provided the U.S. Air Force an American-made commercial solid rocket solution as a replacement for the RD-180 Russian-made, first-stage engine of United Launch Alliance’s Atlas V launch vehicle. “ATK’s solid rocket propulsion solution provides a cost-effective, reliable solution based on advanced technology,” said Blake Larson, president of ATK’s Aerospace ...
 
 

SpaceX breaks ground on Texas rocket launch site

BROWNSVILLE, Texas – The commercial rocket launches that could begin as early as 2016 in the southernmost tip of Texas will be a critical step toward one day establishing a human presence on Mars, SpaceX founder and CEO Elon Musk said Sept 22. With waves from the Gulf of Mexico crashing just over the dunes...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>