Business

February 6, 2013

Lockheed Martin completes major GPS III flight software milestone

The Lockheed Martin team developing the U.S. Air Force’s next generation Global Position System III satellites has completed a key flight software milestone validating the software’s ability to provide reliable and effective command and control for the GPS III satellites planned for launch into orbit.

The GPS III program will affordably replace aging GPS satellites, while improving capability to meet the evolving demands of military, commercial and civilian users. GPS III satellites will deliver better accuracy and improved anti-jamming power while enhancing the spacecraft’s design life and adding a new civil signal designed to be interoperable with international global navigation satellite systems.

The milestone, known as Software Item Qualification Testing, was completed for the satellite’s spacecraft bus flight software, which is critical to controlling the spacecraft on orbit and monitoring the health and safety of the satellite’s subsystems. SIQT included 131 individual test events and represented the culmination of a rigorous software engineering risk reduction and development phase. The software will next be integrated and tested on the first GPS III satellite, which is on schedule for launch availability in 2014.

“Completion of this flight software milestone demonstrates our continued positive program momentum and is another step forward in reducing risk up front to facilitate long term affordability,” said Lt. Col. William ‘Todd’ Caldwell, the U.S. Air Force’s GPS III program manager. “In this challenging budget environment, the entire government and industry team is focused on delivering the critical GPS III satellites affordably and efficiently for users worldwide.”

To further reduce risk, the flight software has already been integrated and tested on the program’s satellite prototype, known as the GPS III Non-Flight Satellite Testbed.

“Delivering fully qualified flight software this early in program development demonstrates the rigor of our GPS III software development processes,” said Keoki Jackson, vice president of Lockheed Martin’s Navigation Systems mission area. “Through up-front investments in high-fidelity, flight equivalent hardware and software testbeds, our team successfully executed on schedule to develop and qualify the flight software critical to the success of the GPS III program.”

Lockheed Martin is on contract to deliver the first four GPS III satellites for launch. The Air Force plans to purchase up to 32 GPS III satellites.

The GPS III team is led by the Global Positioning Systems Directorate at the U.S. Air Force Space and Missile Systems Center, Los Angeles Air Force Base, Calif. Lockheed Martin is the GPS III prime contractor with teammates ITT Exelis, General Dynamics, Infinity Systems Engineering, Honeywell, ATK and other subcontractors. Air Force Space Command’s 2nd Space Operations Squadron (2SOPS), based at Schriever Air Force Base, Colo., manages and operates the GPS constellation for both civil and military users.

 




All of this week's top headlines to your email every Friday.


 
 

 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 
 

Boeing breaks ground in St. Louis for new composites center

Boeing Dec. 16 began construction in St. Louis of a new 367,000-square-foot facility in which it will build parts for the newest member of its 777 commercial airplanes family, the 777X.  About 700 new jobs will be created for the 777X work. Construction should be complete in 2016, with work on 777X wing and empennage...
 

 

Raytheon, Bell conduct first missile launch from V-22

Raytheon and Bell Helicopter have completed two successful launches of the Griffin B missile from a Bell Boeing V-22 Osprey multi-mission aircraft at Yuma Proving Ground, Ariz. As an industry funded effort with Bell’s Xworx, Raytheon demonstrated the simplicity of integrating the Griffin B missile onto the V-22 platform. “This is the first time a...
 
 

Raytheon gallium nitride technology validated for space applications

Satellites may soon carry Raytheon’s Gallium Nitride technology into Earth orbit. Raytheon has successfully validated its GaN Monolithic Microwave Integrated Circuit technology for use in space-bound equipment. Raytheon GaN MMICs, fabricated at its Andover, Massachusetts foundry, demonstrated the radiation hardness required for space through Single Event Burn-out and Total Ionizing Dose t...
 
 
Air Force photograph by A1C Alexander Guerrero

317th AG delivers during massive JFE

Air Force photograph by A1C Alexander Guerrero Eleven C-130H Herculesí from various Air National Guard units and thirteen C-130J Super Herculesí from the 317th Airlift Group at Dyess Air Force Base, Texas, prepare to take off...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>