Space

February 13, 2013

NASA’s Orion lands safely on two of three parachutes in test

NASA engineers have demonstrated the agency’s Orion spacecraft can land safely if one of its three main parachutes fails to inflate during deployment.

The test was conducted Tuesday in Yuma, Ariz., with the parachutes attached to a test article. Engineers rigged the parachutes so only two would inflate, leaving the third to flag behind, when the test capsule was dropped from a plane 25,000 feet above the Arizona desert.

“Today is a great validation of the parachute system,” said Chris Johnson, a NASA project manager for Orion’s parachute system. “We never intend to have a parachute fail, but we’ve proven that if we do, the system is robust for our crew to make it to the ground safely.”

Orion’s parachutes will perform in ways no landing system for a spacecraft carrying humans has been required to do before. Because Orion will return to Earth from greater distances, it will reenter Earth’s atmosphere at speeds of more than 20,000 mph. After re-entry, astronauts will rely on the parachutes to slow the spacecraft for a gentle splashdown in the Pacific Ocean.

This 21,000-pound capsule needs only two main parachutes and one drogue parachute. But NASA spacecraft, particularly those carrying humans, are designed to keep working when something goes wrong. So, Orion will be equipped with three main parachutes and two drogues, providing each system one backup parachute.

In December, engineers simulated a failure of one of the drogue parachutes in a test that ended with a safe landing, proving the system design is valid.

The Feb. 12 test was the eighth parachute engineering development drop test. The next is scheduled for May. The system also will be put to the test in 2014 when Orion makes its first flight test. During the mission, an uncrewed capsule will travel 3,600 miles from Earth, farther than any spacecraft designed to carry humans has gone in more than 40 years.

To join the online conversation about Orion, follow @NASA_Orion and the hashtag #Orion. To learn more about all the ways to connect and collaborate with NASA, visit http://www.nasa.gov/connect.

 




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>