Defense

February 22, 2013

F-35 maintainers test CBRN gear

Tags:
Jess Lozano
461st Flight Test Squadron

F-35 maintainers remove a panel on a JSF last year. Recently, the F-35 Integrated Test Force has progressed towards further operational capability as military members performed maintenance duties while wearing protective uniforms designed to preserve the warfighter and allow the sustainment of operations in the event of a chemical, biological, radiological or nuclear attack.

The F-35 Integrated Test Force has progressed towards further operational capability as military members performed maintenance duties while wearing protective uniforms designed to preserve the warfighter and allow the sustainment of operations in the event of a chemical, biological, radiological or nuclear attack.

Testing gathered data on practicality for maintainers to perform routine maintenance tasks while wearing the CBRN suit, boots and mask. Maintenance personnel donned various configurations of Mission Oriented Protective Posture suits that ranged from gloves and CBRN resistant over-garments to gas masks, flak vests and helmets.

“As a team we were very happy with the maintainability of the F-35 while wearing the chemical gear. We really didn’t run into any restrictions. The team had a great attitude toward this testing and was very motivated to get through it. We realized the importance of proving the ability to perform this type of maintenance for the eventual war fighter,” said Tech. Sgt. Shawn Whittemore, Test Team leader, 412th Aircraft Maintenance Squadron.

The test team consisted of 14 military, contractor and civilian members.

“This testing was the basis to prove the F-35 weapon system is effectively and efficiently supportable in a combat environment. There will be subsequent testing to include weapons loading activities as well as repairs to the aircraft’s low-observable characteristics.” said Mary Parker, the ITF Logistics deputy director.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>