Tech

March 13, 2013

Mitigating risk: NASA Dryden’s counterfeit parts screening system

Preventing counterfeit parts from showing up in NASA Dryden aircraft and equipment takes a team that includes (from left), Steve Wildes, Sherry Schmitz, Nadia Wright, Jaime Garcia and Steve Foster.

NASA’s Dryden Flight Research Center is at the forefront of developing aerospace technology and it is now recognized as a model for ensuring that none of that technology fails from the use of counterfeit parts.

Steven Foster, Dryden’s lead specialist for procurement quality assurance, spearheaded the development of a process that greatly reduces the possibility of receiving and using counterfeit parts.

“We might sometimes add a few steps in a process, but we sleep better at night knowing that we have done everything we can to mitigate that risk,” Foster said. “Some people take the road of least resistance. We don’t.”

Counterfeit parts makers are becoming more sophisticated and attuned to the market, making it a growing problem for industry and government, Foster said. Suppliers selling counterfeit parts across the nation increased 63 percent from 2002 to 2011, adding 9,539 new high-risk vendors in 2011 alone.

It is estimated that about 2 percent of all parts purchased by the government are counterfeit – more than 500,000 parts a year. An example of the problem was $2.7 million in damage to a U.S. Department of Defense missile system caused by the use of counterfeit parts.

“In a recent webcast to 30 countries, we explained how Dryden reduced the risk of counterfeit parts with good processes in place to do a thorough vetting of companies, ranging in size from a mom-and-pop store to a multi-million dollar corporation,” Foster said. “We use that data to make informed decisions about if we want to use a supplier.”

One of the most recent tools used to uncover substandard materials and counterfeit parts, the material analyzer provides an instantaneous readout of the content and quality of the material being checked.

An electronic risk assessment questionnaire was developed at Dryden to determine a company’s records on where parts came from, controls on how the parts are acquired and tested prior to the parts arriving here. A point system from zero to 100 was developed to determine risk. The higher the score the more confident Dryden can be that it is safe to purchase from the company. A score of 52 is required in most cases to procure parts, Foster said.

“Traceability is a big part of aerospace. Where did this part originate? Some suppliers can only trace it back to a country. Of course we won’t use it because we don’t know exactly where it came from and the risk would be too great,” Foster explained.

It’s not always easy tracing the origin of parts, even those that are common off-the-shelf items.

“Some vendors do not want to release information when we start digging. If they refuse to give it to us, we disqualify them,” Foster said.

“There can be a situation where a high-risk company is the only one with the part we need. We still get it, but we increase inspections and testing of the part before it is put into an aircraft for flight,” he added.

Dryden has found counterfeit parts, one that cost just a nickel each. The parts were tie straps, also known as “tie wraps,” that are most commonly used for bundling wires together so they did not interfere with other control or structural components. The parts were procured from suppliers overseas.

“Low cost items can have a high cost on our operation,” said Steven Wildes, chief of the Quality Assurance branch. “Dryden technicians would put the tie wraps on and the part would snap and break in half. We evaluated why the tie wraps would break and determined they were counterfeit,” Wildes said.

Another example was when Dryden ordered O-rings for a jet engine component. What the center received was a video recorder belt labeled as an O-ring that was “very obviously a counterfeit part,” he said.

Former center director Kevin Petersen was concerned about counterfeit parts in the mid-2000s and Wildes was chosen to focus on the quality of parts. In recent years, Wildes hired Foster to focus on refining processes to filter out counterfeit parts. Without a good system to detect them, finding parts for some of the center’s aging aircraft can open the door for counterfeit part suppliers.

The dedication to keeping fake parts and subpar materials out of Dryden shops and aircraft continues with the center’s current director David McBride. McBride approved a state-of-the-art material analyzer recently that assists in determining the quality of delivered parts and materials.

Quality assurance representative Scott Erickson explained the analyzer can determine the chemical make up of materials in a minute or less. In addition, it is so sensitive that it can also be used to investigate even light elements, solder, and welds.

Previous equipment could only analyze general metals, but the new instrument is capable of looking at complex chemical elements used in the development of electronics. It is used to sample deliveries from established vendors and mills and in more extensive investigations on materials from new vendors or from foreign mills.

Scott Erickson prepares a material analyzer to determine the quality of metal sheets that were delivered to Dryden.

Using the device, “We can trust what we are getting,” Erickson said.

Dryden’s Quality Assurance team is now looking for ways to better share what the center has learned.

“We are also working with NASA Headquarters to develop a single list of cleared suppliers for use by all NASA centers. That information could also be shared with different agencies and companies,” Foster said.

The goal of these efforts is the same – protect people from injuries and eliminate unknowns about parts and materials from the risks that must be taken for a successful flight test program.

 




All of this week's top headlines to your email every Friday.


 
 

 

Headlines August 31, 2015

News: Pilot killed in crash was helping wounded veterans – A pilot who died in a small plane crash in the desert northeast of Los Angeles was giving free glider rides to wounded military veterans. Turkey carries out first air strikes as part of anti-Isis U.S. coalition – Turkish fighter jets have carried out their first air...
 
 

News Briefs August 31, 2015

Pakistan officials: U.S. envoy discusses Afghan peace efforts Pakistani officials say visiting U.S. National Security Adviser Susan Rice has discussed efforts to revive Afghan peace talks. Rice met with Prime Minister Nawaz Sharif and army chief Gen. Raheel Sharif Aug. 30. Two Pakistani officials say they discussed efforts to revive talks between the Afghan government...
 
 
Courtesy photograph

F-22 inaugural deployment to Europe

Courtesy photograph A pair of F-22 Raptors fly near the coastline of Panama City Beach, Fla. Four F-22 Raptors, one C-17 Globemaster III, and approximately 60 airmen arrived at Spangdahlem Air Base, Germany, to train with allie...
 

 
ILS photograph

Boeing-built satellite will create first global high-speed broadband network

ILS photograph The Inmarsat-5 F3 satellite launched Aug. 28 aboard a International Launch Services Proton Breeze M rocket from Baikonur, Kazakhstan. EL SEGUNDO, Calif.–When the third Boeing-built [NYSE: BA] Inmarsat-5 sat...
 
 

Civil Air Patrol joins total force ‘Airmen’

When conducting missions for the Air Force as the official Air Force auxiliary, the Civil Air Patrol is now included in the Air Force’s definition of the total force. CAP has provided 74 years of support to emergency services, aerospace education and cadet programs. In August 2015, the Air Force updated Doctrine Volume 2, “Leadership,”...
 
 
DOD photograph by Air Force MSgt. Adrian Cadiz

Carter announces manufacturing initiative to aid war fighters

DOD photograph by Air Force MSgt. Adrian Cadiz Defense Secretary Ash Carter announces the creation of a National Manufacturing Innovation Institute to produce hybrid electronics during a speech at the National Full Scale Aerody...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>