Business

March 18, 2013

Air Force endorses Raytheon’s Center Display Unit for F-16 cockpits

raytheon-F16
Raytheon Technical Services Company LLC, a subsidiary of Raytheon Company, has received U.S. Air Force endorsement of its Center Display Unit as the F-16′s primary flight reference.

Following the endorsement late last year, the Air Force awarded Raytheon a contract for full-rate production of the first 100 CDUs.

A PFR is a requirement in all aircraft and must include airspeed, altitude and attitude data, as well as flight path information for the pilot. Besides flight data, Raytheon’s CDU gives the pilot the ability to control and display information from both on-board and off-board sources, including ground force information.

“This endorsement means F-16 pilots can now use our CDU as their sole primary flight reference,” said Rudy Lewis, vice president of Customized Engineering and Depot Support for RTSC. “The CDU’s efficient installation – which minimizes aircraft integration, airframe and wiring modifications – demonstrates how we are listening to, and working with, our customers to provide advanced and cost-effective situational awareness products.”




All of this week's top headlines to your email every Friday.


 
 

 

F-16V completes major capability milestone

The newest configuration of the F-16 Fighting Falcon, the F-16V, has reached a major capability milestone with the integration of a new Active Electronically Scanned Array radar. Completing this milestone on schedule demonstrates our ability to meet program commitments, said Roderick McLean, vice president and general manager of the F-16/F-22 Integrated Fighter Group at Lockheed...
 
 
Lockheed Martin photograph

Robots moving robots: Lockheed Martin conducts first fully autonomous mission

Lockheed Martin photograph A K-MAX unmanned helicopter delivers an SMSS unmanned ground vehicle during a fully autonomous mission demonstration at Fort Benning, Ga. A safety pilot was on board K-MAX but did not operate the cont...
 
 

Lockheed Martin introduces maritime test bed

Using a newly developed advanced maritime test bed, Lockheed Martin recently demonstrated how continually evolving technologies such as data fusion and predictive analytics can be used to share intelligence quickly and securely – even in limited bandwidth naval settings. This new software test platform, designed to mimic different naval environments at sea and ashore, allowed...
 

 

Aerojet Rocketdyne awarded defense contract for large scale additive manufacturing

Aerojet Rocketdyne was recently awarded a contract by Wright-Patterson Air Force Base, Ohio, through the Defense Production Act Title III Office for large-scale additive manufacturing development and demonstration. The contract will secure multiple large selective laser melting machines to develop liquid rocket engine applications for national security space launch services. Aerojet Rocketdyne ...
 
 

U.S. Navy to test, evaluate Lockheed Martin industrial exoskeletons

Lockheed Martin has received a contract through the National Center for Manufacturing Sciences for the U.S. Navy to evaluate and test two FORTIS exoskeletons. This marks the first procurement of Lockheed Martin’s exoskeletons for industrial use. Terms of the contract were not disclosed. The FORTIS exoskeleton is an unpowered, lightweight exoskeleton that increases an operator’s...
 
 
Northrop Grumman photograph by Alan Radecki

Northrop Grumman, Navy integrate manned, unmanned flight ops

https://www.youtube.com/watch?v=RqiOzO8yV4A&feature=youtu.be Northrop Grumman photograph by Alan Radecki The U.S. Navy’s unmanned X-47B conducts flight operations aboard the aircraft carrier USS Theodore Roosevelt (C...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>