Business

March 27, 2013

AAR ramps up parts availability in Europe

AAR, a global leader in the supply and repair of component parts for the aviation industry, is expanding its parts inventory for the European market, reducing lead times and shipping costs for its customers.

The companyís main distribution center in Amsterdam will carry an increased stock of high-demand airframe and engine-related components, along with bulky, difficult-to-move items such as aircraft surfaces and nacelles.

With more parts on hand locally, this move will ensure that customers can be supported quickly and more economically for their spare parts and inventory needs. The distribution center, located near Amsterdam Schipol Airport, has direct air and road links to many of AARís customers in the European Union, the Balkans and former Commonwealth of Independent States countries.

The center will also be able to better supply AARís Aircraft Component Services repair station in nearby Hoofddorp, Netherlands, where the Company repairs and overhauls an increasing amount of components on the Airbus, Boeing, Bombardier, Fokker, ATR, and Embraer aircraft lines. The Amsterdam center itself provides airframe and engine component repair work. With the increased inventory, ìwe can forward exchange a component out of the Amsterdam location and clients can send core repairs there, said Carl Glover, Vice President Sales for AARís Aviation Supply Chain Group ó Europe, Middle East and Africa.

ìThe Amsterdam center is an important hub within our local and global supply-chain network that efficiently and effectively supports our valued customers,î added Glover. ìThe facility now provides for shorter delivery times and greater local access to rotable products and genuine OEM-traceable inventory. With proximity to Schiphol Airport we can offer timely solutions to our customers throughout Europe, the CIS and even further afield.î




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>