Defense

April 10, 2013

AEDC prepares for an acceptance test in the Space Threat Assessment Testbed facility

aedc1
Air Force photograph by Jacqueline Cowan

Capt. Nicolas Bauer (right) and 2nd Lt. Akshay Tripathi, in the AEDC Space and Missile Test division, install a microsatellite in AEDCís new Space Threat Assessment Testbed to conduct an initial site acceptance test. The initial site acceptance test is the equivalent to the halfway point of mission capability. The STAT can simulate a realistic operational environment to space hardware, using multiple source simulators to emulate the conditions existing at various space orbits. The STAT facility will reach Initial Operating Capability in April, followed by Full Operational Capability certification by September 2013. The facility will be operated under the Space Combined Test Force

aedc2
Air Force photograph by Jacqueline Cowan

Second Lt. Akshay Tripathi (left), in the AEDC Space and Missile Test division, installs a microsatellite in AEDCís new Space Threat Assessment Testbed to conduct an initial site acceptance test as Marc Smotherman, an ATA space chamber lead, observes. The initial site acceptance test is the equivalent to the halfway point of mission capability. The STAT can simulate a realistic operational environment to space hardware, using multiple source simulators to emulate the conditions existing at various space orbits. The STAT facility will reach Initial Operating Capability in April, followed by Full Operational Capability certification by September 2013. The facility will be operated under the Space Combined Test Force.

aedc3
Air Force photograph by Jacqueline Cowan

Second Lt. Akshay Tripathi (left) and Capt. Nicolas Bauer, in the AEDC Space and Missile Test division, install a microsatellite in AEDCís new Space Threat Assessment Testbed to conduct an initial site acceptance test. The initial site acceptance test is the equivalent to the halfway point of mission capability. The STAT can simulate a realistic operational environment to space hardware, using multiple source simulators to emulate the conditions existing at various space orbits. The STAT facility will reach Initial Operating Capability in April, followed by Full Operational Capability certification by September 2013. The facility will be operated under the Space Combined Test Force.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines December 17, 2014

News: U.S. Air Force tanker platform slated for year-end debut - Boeing is planning for first flight of its 767-2C – upon which the U.S. Air Force’s new KC-46 tanker will be based – by year’s end, six months late. Northrop Grumman wins $657.4 million deal to supply drones to South Korea - Northrop Grumman has won...
 
 

NASA launches new Micro-g NExT for undergraduates

NASA is offering undergraduate students an opportunity to participate in a new microgravity activity called Micro-g Neutral Buoyancy Experiment Design Teams. The deadline for proposals is Jan. 28, 2015. Micro-g NExT challenges students to work in teams to design and build prototypes of spacewalking tools to be used by astronauts for spacewalk training in the...
 
 
launch1

Storm fails to quench liftoff of secret reconnaissance satellite

The fiery launch of an Atlas V (541), among the most powerful of the venerable Atlas family, briefly dispelled the gloom over Californiaís Central Coast on the evening of Dec. 12. A team of personnel from United Launch Allianc...
 

 
Coast Guard photograph

Navy demonstrates unmanned helicopter operations aboard Coast Guard cutter

http://static.dvidshub.net/media/video/1412/DOD_102145893/DOD_102145893-512×288-442k.mp4 Coast Guard photograph An MQ-8B Fire Scout UAS is tested off the Coast Guard Cutter Bertholf near Los Angeles, Dec. 5 2014. The Coast...
 
 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>