Space

April 17, 2013

SpaceShipTwo passes airborne rocket motor cold flow test

Tags:
Raphael Jaffe
staff writer

SpaceShipTwo in flight during a previous glide test above Mojave Air & Space Port.

The Scaled Composites/Virgin Galactic test program at Mojave is accelerating.

April 12 there was a 10.8-minute cold flow test in which the hybrid rocket motor was tested after SS2 was released from its mother ship, the WhiteKnightTwo.

Since March 11 there have been five WK2 test flights, which include two SS2 releases. Dec. 19 there was a 13.4-minute release-glide flight to test SS2 performance after several changes which included installing the rocket motor systems and nozzle; a new shortened aft skirt; and wing and strake thermal protection.

The hybrid rocket motor is a scaled up version of the one used to take SS1 to the edge of space, and win the Ansari $10 million X Prize with two such flights within a two week period, Oct. 4, 2004. The SS2 motor is rated at three times higher thrust than the original version. The liquid nitrous oxide oxidizer is sent through the hydroxyl terminated polybutadiene fuel. This configuration was selected for SS1 as safer than other candidate rocket motors. It is also being used for the Sierra Nevada Dream Chaser.

Cold flow test of SpaceShipTwo produces contrail of ìcoldî oxidizer.

The cold flow test was the first time in the air that oxidizer was flowed through the propulsion system and out through the nozzle at the rear of the vehicle. As well as providing further qualifying evidence that the rocket system is flight ready, the test also provided a stunning spectacle due to the oxidizer contrail and for the first time gave a taste of what SpaceShipTwo will look like as it powers to space.

The upcoming first powered flight of SpaceShipTwo is in many ways the most significant milestone to date, being the first time that the spaceship has flown with all systems installed and fully operational. The speculation at Mojave Air & Space Port is that the first powered flight may take place within a few weeks.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>