Space

April 24, 2013

Space station communications test bed checks out; experiments begin

NASA’s Space Communications and Navigation (SCaN) test bed has begun its experiments after completing its checkout on the International Space Station.

The SCaN test bed is an advanced, integrated communications laboratory facility that uses a new generation of software-defined radio technology to allow researchers to develop, test and demonstrate advanced communications, networking and navigation technologies in space. This radio communication technology is based on a new standard that enables radio characteristics and functionality to be changed simply by altering the software. It can be transferred to any radio built to the standard. The cost savings and efficiency of this new technology will improve NASA’s data communications in the future.

“The space station serves as a dynamic test bed for the technologies needed for future human and robotic exploration,” said International Space Station Program Manager Michael Suffredini. “SCaN is an example of the technologies that are being matured in low-Earth orbit and used to increase science return of many different types of spacecraft.”

Checkout activities completed in February established the status and health of the payload, including the antenna systems and software on each of three SDRs. The test bed will help technology developers and mission planners understand how they will be used in future missions.

“With the development and deployment of this test bed, NASA has enabled significant future advancements by gaining knowledge and understanding of SDR development,” said John Rush, technology and standards director for SCaN at NASA Headquarters in Washington. “That has created expertise across the agency that will define and develop the next generation of SDRs for future missions.”

Initial experiments under way include advancing in S-band and Ka-band SDR technology and enhancing the capabilities of the existing communications paths, especially in the Ka-band. Researchers expect the test bed to operate aboard the space station for as long as six years.

“The SCaN Test bed represents a significant advancement in SDRs and its applications for NASA,” said David Irimies, project manager for the SCaN test bed at NASA’s Glenn Research Center in Cleveland. “Investigating these SDR technologies in the dynamic space environment increases their technology readiness level and maturity, which in turn can be used for future missions as risk reduction.”

An experiment with NASA’s latest Tracking and Data Relay Satellite-K will be the first in-orbit test and demonstration of a TDRS spacecraft acquiring and successfully auto-tracking a Ka-band user in low-Earth orbit.

This reconfigurable in-orbit laboratory provides broad participation to NASA, industry, academia and other government agencies. These experiments will contribute data to the Space Telecommunications Radio Standard Compliant repository and will enable future hardware platforms to use common, reusable software modules to reduce development time and costs.

NASA continues to solicit proposals to participate in the development, integration and in-orbit execution of research and technology experiments and demonstrations using the test bed. The first users outside NASA are expected to demonstrate experiments on the SCaN test bed by 2014.

Glenn Research Center leads the SCaN test bed multi-center team, which includes the agency’s Goddard Space Flight Center in Greenbelt, Md.; Jet Propulsion Laboratory in Pasadena, Calif.; and Johnson Space Center in Houston. General Dynamics of Scottsdale, Ariz., and Harris Corp. of Melbourne, Fla., developed SDRs under cooperative agreements with NASA. The SCaN Program Office in the Human Exploration and Operations Mission Directorate at NASA Headquarters in Washington manages, oversees and funds the test bed.

 




All of this week's top headlines to your email every Friday.


 
 

 
NASA/JPL photograph

NASA’s Dawn spacecraft captures best-ever view of dwarf planet

Zoomed out – PIA19173 Ceres appears sharper than ever at 43 pixels across, a higher resolution than images of Ceres taken by the NASA’s Hubble Space Telescope in 2003 and 2004. NASA’s Dawn spacecraft has retur...
 
 
ATK

ATK completes installation of world’s largest solid rocket motor for ground test

ATK The first qualification motor for NASA’s Space Launch Systems booster is installed in ATK’s test stand in Utah – ready for a March 11 static-fire test. NASA and ATK have completed installing the first Spac...
 
 
ULA photograph

Third Lockheed Martin-built MUOS satellite launched, responding to commands

ULA photograph The U.S. Air Force’s 45th Space Wing successfully launched the third Mobile User Objective System satellite, built by Lockheed Martin, for the U.S. Navy at 8:04 p.m. Jan. 20, 2015, from Launch Complex 41 at...
 

 
ULA photograph

ULA successfully launches Navy’s Mobile User Objective System-3

ULA photograph The U.S. Air Force’s 45th Space Wing successfully launched the third Mobile User Objective System (MUOS) satellite, built by Lockheed Martin, for the U.S. Navy at 8:04 p.m. Jan. 20, 2015, from Launch Comple...
 
 

Aerojet Rocketdyne Propulsion supports launch, flight of third MUOS satellite

Aerojet Rocketdyne played a critical role in successfully placing the third of five planned Mobile User Objective System (MUOS-3) satellites, designed and built by Lockheed Martin, into orbit for the U.S. Navy. The mission was launched from Cape Canaveral Air Force Station in Florida aboard a United Launch Alliance Atlas V rocket, with five Aerojet...
 
 
LM-MUOS-satellite

U.S. Navy poised to Launch Lockheed Martin-built MUOS-3 satellite

The U.S. Navy and Lockheed Martin are ready to launch the third Mobile User Objective System satellite, MUOS-3, from Cape Canaveral Air Force Station, Fla., Jan. 20 aboard a United Launch Alliance Atlas V rocket. The launch win...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>