Defense

May 6, 2013

Eglin AFB munitions unit creates ammo linker for AFSOC

A lightweight, mobile 30 mm ammunition round linker connects rounds to MK-15 links using a hand crank or a conventional electric drill. The linker was created by the Munitions Materiel Handling Equipment Focal Point, a section under the Air Force Life Cycle Management Center’s armament directorate, specializing in developing locally manufactured equipment for the Air Force ammo and weapons communities. The new linker is one-tenth the weight and cost of the current ammo linker in use and will be delivered to Air Force Special Operations Command units in May.

A new, lighter, mobile 30 mm ammo linker system is set for delivery to Air Force Special Operations Command units at Eglin Air Force Base, Fla., in May.

The 89-pound apparatus can feed 15 unattached 30 mm rounds into MK-15 links via a crank system and was created and designed by Eglin Air Force Base’s munitions materiel handling equipment Airmen. The MMHE Focal Point, a section under the Air Force Life Cycle Management Center’s armament directorate, specializes in developing locally manufactured equipment for the Air Force ammo and weapons communities.

“The MMHE receives taskings via the major commands as well as through customer support visits,” said CMSgt. Dennis Tangney, the MMHE focal point chief. “Our airmen and engineers visit ammo and weapons sections and talk with maintainers and weapons crews. We explain to them how we can develop support equipment and tools that could make their jobs easier.”

Those ideas and concerns are defined and passed up the chain of command for approval. If the idea is feasible, cost-effective and to the benefit of the Air Force, a design team begins the creation process on the product.

The initial AFSOC request was for a hand-held de-linker to easily and safely remove the 30 mm ammunition rounds from the links.

“The previous method of using the force of your hands was slow and potentially dangerous,” said TSgt. Mike Stratton, the linker project manager.

Engineers and drafters went to work creating a new product to meet the specific requirements to accomplish the task.

Several 30 mm ammunition rounds are loaded into the mobile, hand-cranked linker to be connected with MK-15 links for use on Air Force Special Operations Command C-130 aircraft.

The result was a 7-pound de-linker tool that resembles a very large set of plyers, but fit the 30 mm round perfectly. The de-linker reduces the amount of force to remove the ammo to a minimum.

After trying out the de-linker prototype, Stratton and his team received feedback that AFSOC Airmen could use a quicker, deployable way of connecting the ammo into the MK-15 belts.

“We evaluated the linking process at Hurlburt Field, and the ammo troops told us the current machine is too large, expensive, complex and not very mobile,” said Ben Chambliss, the linker project engineer.

Again the MMHE developers began designing to meet this new requirement.

MMHE created a new linker resulted that weighed and cost one-tenth of the current linker in use. The linker requires no electricity with the use of a hand crank, but it can also be controlled with an electric drill for faster speed. It is 58 inches long and 18 inches wide.

“(The linker) can be tossed in the back of a truck or on an aircraft and taken to wherever it’s needed,” Chambliss said.

The lightweight, mobile 30 mm ammunition round linker and de-linker sit ready for delivery to Air Force Special Operations Command. The linker connects rounds to MK-15 links using a hand crank or a conventional electric drill. The de-linker (similar to a large set of plyers) disconnects the rounds safely and easily from the MK-15 links. Both products were created by the Munitions Materiel Handling Equipment Focal Point, a section under the Air Force Life Cycle Management Center’s armament directorate, specializing in developing locally manufactured equipment for the Air Force ammo and weapons communities.

An MMHE project goes through two main phases, the prototype phase and first article phase. The prototype phase is the creation by MMHE and the testing of the designed product by the customer. In the first article phase, another product is created with the changes and corrections provided from the customer testing. The new (first article) product goes back to the customer for final validation. Once it’s cleared by the customer and approved by an Air Force safety board for operational use, the blueprints become available to DOD personnel via a secure website.

The linker/de-linker prototypes are already in use by the 27th Special Operations Maintenance Squadron at Cannon Air Force Base, N.M.

“These tools allow AFSOC munitions personnel to support AC-130W (Stinger II) and future AC-130J Gunship 30 mm operations in a safe and rapid manner at home station or deployed to austere locations world-wide providing outstanding munitions support to the special operations force mission, ‘any time, any place,’” said Richard McDonald, the AFSOC armament systems section chief. “Both tools can stand up to the wear and tear of daily operations at home station or in the field, be locally manufactured and parts can be easily and rapidly replaced as needed.”

At any time, the MMHE airmen have as many as 25 new pieces of equipment in development for Air Force war fighters.

 

The Munitions Materiel Handling Equipment Focal Point, a section under the Air Force Life Cycle Management Center’s armament directorate, specializes in developing locally manufactured equipment for the Air Force ammo and weapons communities. At any time, the MMHE Airmen have as many as 25 new pieces of equipment in development for Air Force war fighters.




All of this week's top headlines to your email every Friday.


 
 

 
Navy photograph

Navy to commission submarine North Dakota

Navy photograph The PCU North Dakota (SSN 784) during bravo sea trials. The crew performed exceptionally well on both alpha and bravo sea trials. The submarine North Dakota is the 11th ship of the Virginia class, the first U.S....
 
 
Army photograph by David Kamm

Army advances technology at Base Camp Integration Laboratory

Army photograph by David Kamm Katherine Hammack, assistant secretary of the Army for Installations, Energy and Environment, listens as Bob Graney explains details of the energy-efficient rigid-wall shelter system, Oct. 22, 2014...
 
 
Air Force photograph by Wesley Farnsworth

New application aims to improve analyst’s performance

Air Force photograph by Wesley Farnsworth 1st Lt. Kristin Spencer, 711th Human Performance Wing behavioral scientist, watches a video for suspicious behavior during a demonstration of a new Enhanced Reporting, Narrative Event S...
 

 
navair-triton2

Triton UAS completes second transcontinental flight across the U.S.

  The second of three MQ-4C Triton test aircraft makes its debut at Naval Air Station Patuxent River, Md., Oct. 24 after completing its inaugural cross-country flight from Northrop Grumman’s Palmdale, Calif., facilit...
 
 
Air Force photograph by SrA. Taylor Curry

Wolf Pack soars at RED FLAG-Alaska 15-1

Air Force photograph by SrA. Taylor Curry South Korea air force pilots prepare to taxi their KF-16 Fighting Falcons to the runway during Red Flag-Alaska 15-1 Oct. 17, 2014, at Eielson Air Force Base, Alaska. This field training...
 
 
Courtesy photograph

Upgrades ‘new normal’ for armor in uncertain budget environment

Courtesy photograph The current Paladin is severely under-powered and overweight so its speed of cross-country mobility is pretty restricted. The Paladin Integrated Management program is designed to address a number of these we...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>