Business

June 3, 2013

Dassault Falcon Jet to expand Arkansas completion facility

Dassault Falcon Jet plans to increase the size of its completion center in Little Rock, Ark., to accommodate future Falcons, it was announced May 30 at a press conference attended by Gov. Mike Beebe of Arkansas, Senators John Boozman ® and Mark Pryor (D), Representative Tim Griffin ®, Little Rock Mayor Mark Stodola and executives from Dassault Falcon Jet.

Over the next three years, the company will invest $60 million in new construction and the refurbishment of existing facilities.

“Little Rock has been a major part of our company identity over the last 38 years and today is the company’s largest industrial facility,” said Eric Trappier, chairman and CEO of Dassault Aviation. “It has become our worldwide center of excellence for primary completion activities and pioneered the use of digital design in cabin completion. The new investment will not only increase capacity but enhance the overall quality and efficiency of the products we provide to our customers.”

“I like to say that a piece of Little Rock is always flying somewhere in the world because of the craftsmanship, ingenuity and dedication of our employees here,” said John Rosanvallon, President and CEO of Dassault Falcon Jet. “I am glad that the Dassault Aviation Board of Directors gave the green light for this major expansion and want to thank Governor Beebe, the Little Rock Airport Commission and the Arkansas Economic Development Commission for a productive exchange that ultimately led to a win-win agreement for Dassault Falcon Jet and the State of Arkansas.”

“Dassault Falcon Jet is a cornerstone of Arkansas’s aviation sector, and today’s significant investment will help cement that status for many years to come,” Governor Beebe said. “This company is a big reason that aviation products are one of our top exports, and their Little Rock employees are a big reason Dassault Falcon Jet is committed to doing business in Arkansas.”

Site preparation will begin in early 2014 and construction will take place through the early part of 2016. The result will be an increase of 250,000 square feet dedicated to production and completion activities. The project will also include refurbishment of the cabinet, upholstery and headliner shops along with upgrades to older hangars. The expansion will bring the total facility footprint to 1.25 million square feet.

The new completion facility will be state-of-the-art, with advanced tools and processes that shorten completion time and increase quality and accuracy.

In 2010, Dassault Falcon Jet received approval from the FAA for the use of 3D data during the completion process, making it the first OEM to have approval for both 3D type design and completion. In addition to enhancing quality, this allows the opportunity for the customer to visualize the final configuration of the aircraft.

In 2012, Dassault delivered 66 Falcon aircraft, and expects that number to increase in the coming years.

 




All of this week's top headlines to your email every Friday.


 
 

 
GPS-OCX

GPS III, OCX successfully demonstrate key satellite command, control capabilities

Lockheed Martin and Raytheon successfully completed the fourth of five planned launch and early orbit exercises to demonstrate new automation capabilities, information assurance and launch readiness of the worldís most powerfu...
 
 

Aerojet Rocketdyne successfully demonstrates 3D printed rocket propulsion system for satellites

Aerojet Rocketdyne has successfully completed a hot-fire test of its MPS-120 CubeSat High-Impulse Adaptable Modular Propulsion System. The MPS-120 is the first 3D-printed hydrazine integrated propulsion system and is designed to provide propulsion for CubeSats, enabling missions not previously available to these tiny satellites. The project was funded out of the NASA Office of Chief...
 
 

Boeing breaks ground in St. Louis for new composites center

Boeing Dec. 16 began construction in St. Louis of a new 367,000-square-foot facility in which it will build parts for the newest member of its 777 commercial airplanes family, the 777X.  About 700 new jobs will be created for the 777X work. Construction should be complete in 2016, with work on 777X wing and empennage...
 

 

Raytheon, Bell conduct first missile launch from V-22

Raytheon and Bell Helicopter have completed two successful launches of the Griffin B missile from a Bell Boeing V-22 Osprey multi-mission aircraft at Yuma Proving Ground, Ariz. As an industry funded effort with Bell’s Xworx, Raytheon demonstrated the simplicity of integrating the Griffin B missile onto the V-22 platform. “This is the first time a...
 
 

Raytheon gallium nitride technology validated for space applications

Satellites may soon carry Raytheon’s Gallium Nitride technology into Earth orbit. Raytheon has successfully validated its GaN Monolithic Microwave Integrated Circuit technology for use in space-bound equipment. Raytheon GaN MMICs, fabricated at its Andover, Massachusetts foundry, demonstrated the radiation hardness required for space through Single Event Burn-out and Total Ionizing Dose t...
 
 
Air Force photograph by A1C Alexander Guerrero

317th AG delivers during massive JFE

Air Force photograph by A1C Alexander Guerrero Eleven C-130H Herculesí from various Air National Guard units and thirteen C-130J Super Herculesí from the 317th Airlift Group at Dyess Air Force Base, Texas, prepare to take off...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>