Space

July 8, 2013

NASA Tests Game Changing Composite Cryogenic Fuel Tank

PR Newswire

NASA recently completed a major space technology development milestone by successfully testing a pressurized, large cryogenic propellant tank made of composite materials. The composite tank will enable the next generation of rockets and spacecraft needed for space exploration.

Cryogenic propellants are gasses chilled to subfreezing temperatures and condensed to form highly combustible liquids, providing high-energy propulsion solutions critical to future, long-term human exploration missions beyond low-Earth orbit. Cryogenic propellants, such as liquid oxygen and liquid hydrogen, have been traditionally used to provide the enormous thrust needed for large rockets and NASA’s space shuttle.

In the past, propellant tanks have been fabricated out of metals. The almost 8 foot- (2.4 meter) diameter composite tank tested at NASA’s Marshall Space Flight Center in Huntsville, Ala., is considered game changing because composite tanks may significantly reduce the cost and weight for launch vehicles and other space missions.

“These successful tests mark an important milestone on the path to demonstrating the composite cryogenic tanks needed to accomplish our next generation of deep space missions,” said Michael Gazarik, NASA’s associate administrator for space technology at NASA Headquarters in Washington. “This investment in game changing space technology will help enable NASA’s exploration of deep space while directly benefiting American industrial capability in the manufacturing and use of composites.”

Switching from metallic to composite construction holds the potential to dramatically increase the performance capabilities of future space systems through a dramatic reduction in weight. A potential initial target application for the composite technology is an upgrade to the upper stage of NASA’s Space Launch System heavy-lift rocket.

Built by Boeing at their Tukwila, Wash. facility, the tank arrived at NASA in late 2012. Engineers insulated and inspected the tank, then put it through a series of pressurized tests to measure its ability to contain liquid hydrogen at extremely cold temperatures. The tank was cooled down to -423 degrees Fahrenheit and underwent 20 pressure cycles as engineers changed the pressure up to 135 psi.

“This testing experience with the smaller tank is helping us perfect manufacturing and test plans for a much larger tank,” said John Vickers, the cryogenic tank project manager at Marshall. “The 5.5 meter (18 foot) tank will be one of the largest composite propellant tanks ever built and will incorporate design features and manufacturing processes applicable to an 8.4 meter (27.5 foot) tank, the size of metal tanks found in today’s large launch vehicles.”

The NASA and Boeing team are in the process of manufacturing the 18 foot (5.5 meter)-diameter composite tank that also will be tested at Marshall next year.

“The tank manufacturing process represents a number of industry breakthroughs, including automated fiber placement of oven-cured materials, fiber placement of an all-composite tank wall design that is leak-tight and a tooling approach that eliminates heavy-joints,” said Dan Rivera, the Boeing cryogenic tank program manager at Marshall.

Composite tank joints, especially bolted joints, have been a particularly troubling area prone to leaks in the past. Boeing and its partner, Janicki Industries of Sedro-Woolley, Wash., developed novel tooling to eliminate the need for heavy joints.

“Boeing has experience building large composite structures, and Marshall has the facilities and experience to test large tanks,” explained John Fikes, the cryogenic tank deputy project manager at Marshall. “It has been a team effort, with Boeing working with NASA to monitor the tests and gather data to move forward and build even larger, higher performing tanks.”

“Game changing is about developing transformative technologies that enable new missions and new capabilities,” said Stephen Gaddis, the program manager for the Game Changing Development Program at NASA’s Langley Research Center in Hampton, Va. “Technological advances like the cryogenic tank can ripple throughout the aerospace industry and change the way we do business.”

A video that illustrates NASA’s composite cryogenic tank work is available online here.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines July 21, 2014

News: IDF releases Iron Dome interception rate - Israel’s Iron Dome system has successfully intercepted 86 percent of the Palestinian rockets that it has engaged during Operation ‘Protective Edge’, according to the Israel Defense Forces.   Business: The turnaround of France’s defense giant Thales - Within seconds of meeting Jean-Bernard Levy it becomes apparent that h...
 
 

News Briefs July 21, 2014

Corruption investigated in Kansas National Guard The Kansas Adjutant General’s office says federal authorities are investigating possible corruption involving outside medical companies’ contracts with the Kansas Army National Guard. Sharon Watson, spokeswoman for the adjutant general’s office, confirmed the investigation Friday to The Lawrence Journal-World but declined to rel...
 
 
Air Force photograph by Rick Goodfriend

B61 undergoes testing in AEDC wind tunnel

Air Force photograph by Rick Goodfriend Arnold Engineering Development Complex engineers recently joined researchers with Sandia National Laboratories to perform a wind tunnel test on a full-scale mock-up B61. Pictured with the...
 

 
Army photograph by Charles Kennedy

New CT scanner finds diverse, important uses for researchers

Army photograph by Charles Kennedy Turning a now-standard tool for medical diagnostics and therapeutics to a host of new applications, the U. S. Army Research Laboratory’s Survivability/Lethality Analysis Directorate rece...
 
 

Ingalls Shipbuilding awarded $23.5 million LHA 8 affordability contract

Huntington Ingalls Industries’ Ingalls Shipbuilding division has been awarded an affordability design contract for $23.5 million for early industry involvement to reduce the construction and life-cycle cost for the amphibious assault ship LHA 8. “Ingalls Shipbuilding has been constructing large-deck amphibious ships for nearly 50 years, and this contract will build on our company...
 
 
Marine Corps photograph

DOD identifies missing World War II Marine

Marine Corps photograph Marines wounded during the landing on Tarawa in November 1943 are towed out on rubber boats to larger vessels that will take them to base hospitals. The Department of Defense POW/Missing Personnel Office...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>