Business

July 12, 2013

Northrop Grumman sponsors second year of collaborative engineering project by Cal State students

Cal Poly, Pomona students (from left) Luis Andrade, Mathew Gan, Ajay Bettadapura, Jordan Quintana and Ramon Navarro discuss flight plans for their unmanned aerial vehicle, whose mission was to drop a bottle of water on a target mid-flight. Team members ensured that the aircraft’s communications link was functioning and that the payload was armed with the water bottle at the appropriate time.

WOODLAND HILLS, Calif. In a partnership with two California State University schools, Northrop Grumman) recently sponsored the second year of a student project that successfully demonstrated the collaboration between unmanned aerial and ground vehicles.

On June 1, engineering students from California Polytechnic State University, San Luis Obispo and California State Polytechnic University, Pomona gathered at the experimental flight field outside San Luis Obispo for a flight demonstration that ended a yearlong collaborative project on autonomous flight and geolocation.

This year’s project built on the effort started during the 2011-2012 academic year. In the first year of the project, an unmanned aerial vehicle provided an accurate geolocation solution to a ground vehicle.
The aircraft located a target that resembled a large red exercise ball, and transmitted its coordinates to a ground station, which then directed a ground vehicle to navigate to the target in the field.

The program was expanded during the second year to include a second unmanned aerial vehicle whose mission was to drop a bottle of water at the location of the target whose coordinates were established by the first autonomous aerial vehicle. Similar to the program’s first year, the autonomous ground vehicle navigated to the target and verified that the package ñ in this case, the bottle of water ñ had been delivered close to the target.

Cal Poly, San Luis Obispo students Ethan Frame (left) and Nestor Trevino prepare their fixed-wing, remote-controlled Telemaster aircraft on the tarmac and ensure that flight-test cameras are communicating data for tracking the flight.

To prepare for the demonstration, Cal Poly students from San Luis Obispo enhanced a fixed-wing remote control aircraft with sensors and a communications link, while students from Pomona developed a second aerial vehicle capable of carrying and releasing a water bottle at a waypoint determined by the aerial vehicle so that the bottle would successfully land on the target. Pomona students also made numerous upgrades to their ground vehicle. Approximately 50 students from the two campuses participated in the program, forming virtual teams to remotely collaborate on the project.

“The project demanded an exceptional degree of collaboration, and the students rose to the challenge,” said Eric Mehiel, chair of the aerospace engineering department at Cal Poly, San Luis Obispo. “Programs like this take ‘learn by doing’ to new levels. The advanced nature of the technology requires students to acquire and apply new knowledge that is beyond the traditional class or textbook.”

The program leveraged three Northrop Grumman core capabilities: unmanned vehicles, sensors and geolocation, and distributed systems integrated through software. Northrop Grumman provided supplies and designed the program’s curriculum. Additionally, Northrop Grumman employee volunteers served as mentors and provided a technical critique of the student-led design approach during a midyear project review.

“This student project provides excellent preparation for the future workforce, which will come to the job thoroughly prepared to take on the toughest engineering challenges,” said Charles Volk, vice president of Northrop Grumman’s Advanced Navigation Systems business unit.

Northrop Grumman and the two Cal Poly campuses plan to continue the partnership during the next academic year by building on the initial project concept. Northrop Grumman is an ongoing contributor to science, technology, engineering and mathematics educational activities and initiatives in the local community.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines September 2, 2014

News: Debris yields clues that pilot never ejected - When investigators were finally able to safely enter the crash site of an F-15C “Eagle” fighter jet on the afternoon of Aug. 27, they made a grim discovery that concluded more than 30 hours of searching – the pilot never managed to eject from the aircraft.  ...
 
 

News Briefs September 2, 2014

Pentagon: Iraq operations cost $560 million so far U.S. military operations in Iraq, including airstrikes and surveillance flights, have cost about $560 million since mid-June, the Pentagon said Aug. 29. Rear Adm. John Kirby, the Pentagon press secretary, said the average daily cost has been $7.5 million. He said it began at a much lower...
 
 

Unmanned aircraft partnership reaches major milestone

A team of research students and staff from Warsaw University of Technology have successfully demonstrated the first phase of flight test and integration of unmanned aircraft platforms with an autonomous mission control system. The demonstration marks a significant milestone in a partnership between the university and Lockheed Martin that began earlier this year. This is...
 

 

Raytheon delivers first Block 2 Rolling Airframe Missiles to US Navy

Raytheon delivered the first Block 2 variant of its Rolling Airframe Missile system to the U.S. Navy as part of the company’s 2012 Low Rate Initial Production contract. RAM Block 2 is a significant performance upgrade featuring enhanced kinematics, an evolved radio frequency receiver, and an improved control system. “As today’s threats continue to evolve,...
 
 
Courtesy photograph

Two Vietnam War Soldiers, one from Civil War to receive Medal of Honor

U.S. Army graphic Retired Command Sgt. Maj. Bennie G. Adkins and former Spc. 4 Donald P. Sloat will receive the Medal of Honor for actions in Vietnam. The White House announced Aug. 26 that Retired Command Sgt. Maj. Bennie G. A...
 
 

Sparks fly as NASA pushes limits of 3-D printing technology

NASA has successfully tested the most complex rocket engine parts ever designed by the agency and printed with additive manufacturing, or 3-D printing, on a test stand at NASA’s Marshall Space Flight Center in Huntsville, Ala. NASA engineers pushed the limits of technology by designing a rocket engine injector – a highly complex part that...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>