Defense

July 22, 2013

Army adopts stronger, lighter composite materials

The U.S. Army Research, Development and Engineering Command’s Aviation and Missile RDEC Prototype Integration Facility’s Advanced Composites Lab is at the forefront of composite repair in Army aviation. In addition to performing the highest quality composite repairs, the PIF Advanced Composites Lab is creating solutions for the broad spectrum of composite needs in Army aviation.

In the future, Army aircraft may be made of all composite materials, and the Prototype Integration Facility Advanced Composites Laboratory is ready.

Part of the Aviation and Missile Research Development and Engineering Center’s, or AMRDEC’s, Engineering Directorate, the Prototype Integration Facility’s, PIF’s, Advanced Composites Lab has successfully designed and made repairs on damaged composite aircraft components for several years now.

From research and development to implementation and rapid prototyping, advancing composites technology is one of AMRDEC’s core competencies that enable the current and future force.

The PIF Advanced Composites Lab is one of several teams at the AMRDEC working with composites.

Composite materials are a combination of materials that, when combined, produce a new material with characteristics different from the individual components. Examples of composite materials are fiberglass, Kevlar, and carbon fiber. Composite materials may be preferred for many reasons, including increased strength, reduced weight, and reduced production and sustainment cost.

“We have gotten as strong and as light as we can get with metals, and we’re at the end of what metals can economically do,” PIF Advanced Composites Lab lead Kimberly Cockrell said. “The only way to get stronger and lighter and more capable for the fight is to go to composites.”

PIF leadership recognized a need for advanced composites repair and began developing a composites capability within the PIF mission to provide rapid response solutions to the warfighter. The program includes repair design and engineering substantiation to show that repaired components are returned to original strength.

Personnel in the PIF Advanced Composites Lab designed and developed repairs for damaged composite stabilators on the UH-60M Black Hawk helicopter and the AH-64E Apache helicopter. Prior to their repair method, the only way to repair an aircraft with a damaged stabilator was to pull off the broken stabilator and replace it with a new one.

Cockrell said the “pull-and-replace” approach was costing the Army up to six figures per stabilator replacement.

While the first repair procedures were designed for Black Hawk stabilators, the repair method applies to any solid laminate or sandwich core composite structure, so the procedures and training can be leveraged to other Army aircraft.

Cockrell is proud of the lab’s achievements. Its repair procedures are the first approved repair for primary composite structure on Army aircraft.

With integral support from the AMRDEC’s Aviation Engineering Directorate, the procedures for the composite stabilator repairs have been written and are undergoing approval for release by the U.S. Army Aviation and Missile Life Cycle Management Command, or AMCOM, Logistics Center.

An important aspect of developing repair methods is working with the repair personnel who will make the repairs. Members of the PIF Advanced Composites Lab have been training Soldiers on the new stabilator repair procedures prior to deployment so that they can request approval to use them, on a case-by-case basis, through the Aviation Engineering Directorate.

The lab has also trained the instructors at the 128th Aviation Brigade, as well as the AMCOM logistics assistance representatives.

In addition to training, the PIF Advanced Composites Lab, in partnership with the Aviation Engineering Directorate, played a lead role in developing the Army Technical Manual 1-1500-204-23-11 “Advanced Composite Material General Maintenance and Practices,” as well as in defining the tooling and material load for the new AVIM composites shop set.

The lab is currently working repairs for blades too, as well as just-in-time tooling for parts with complex curves or topography.

And in addition to repair solutions, the lab is using composite materials to create solutions for other issues. For example, it has designed and built a composite doubler to strengthen the hat channels that extend from the hinges of the UH-60 engine cowling.

“When the aircraft is on the ground being maintained, the engine cowling folds out to become a maintenance stand,” Cockrell explained. “Two soldiers can stand up there with a tool box and work on the engine. Unfortunately, minor damage to those hat channels can cause these (cowlings) to catastrophically fail and seriously injure the soldiers.”

“We designed this piece so that – if the hat channel shows any kind of damage whatsoever – you can simply install this doubler over the damaged area; it will restore the cowling to its original strength or better, and two doublers – one on each side of the cowling – adds less than a pound to the overall aircraft weight,” Cockrell continued. “So the pound that you add is well-worth the safety margin you gain.”

It’s concepts like that, Cockrell said, that the lab is introducing to program managers to show how the lab can help with more than just repairing stabilators.

“Our goal is to transition the stabilator repair business to other sources of supply, because we know that as soon as we get these repairs fully fielded, there will be new structures and composites issues for us to work,” Cockrell said. “The Apache composite tailboom, new composite cabin frames, new composite cabin floors, and new composite blades are all coming down the pike.”

“In five to 10 years, it’s all composite,” he said. “So whether it’s fiberglass or carbon fiber or Kevlar or a hybrid, it’s going all composite quickly. And it’s important for the Army to be ready.”

 




All of this week's top headlines to your email every Friday.


 
 

 
Army photograph by Sgt. Thomas Duval

Air Force, Army Aviation come together to complete vital mission in Egypt

Army photograph by Sgt. Thomas Duval Soldiers and airmen load a UH-60 Black Hawk into an Air Force C17 Globemaster III Aug. 19, 2104, at an old Israeli airstrip in the Sinai Peninsula of Egypt. The airstrip is now used by the M...
 
 
Air Force photograph by TSgt. Terri Praden

Joint effort validates ability to move Stryker vehicles via air

Air Force photograph by TSgt. Terri Praden An Army Stryker combat vehicle is guided into a C-17 Globemaster III during a 25th Infantry Division training exercise Aug. 13, 2014, at Joint Base Pearl Harbor-Hickam, Hawaii. The Str...
 
 

AF funds small business participation in research and development programs

The Air Force is searching for innovative, technology-based small businesses to compete for Small Business Innovation Research and Small Business Technology Transfer, or SBIR and STTR, research and development contracts. “We’re trying to foster innovative technology solutions for the warfighter and the U.S. Air Force SBIR and STTR programs ( by providing) more than $300...
 

 
Air Force photograph by Michele Eaton

AFRL gaming lab provides real-world training

Air Force photograph by Michele Eaton Air Force Research Laboratory Gaming Research Integration for Learning Lab interns Macy Fraylick and Lizzie Adams demonstrate the Full Throttle Karting simulation tool Aug. 7 at the Wright ...
 
 
Courtesy photograph

Air Force, Creare develop technology

Courtesy photograph CREARE engineers test the 10 K cryocooler in a thermal vacuum chamber. The Air Force and the New Hampshire-based business developed a two-stage turbo-Brayton cryocooler that is expected to enhance operation ...
 
 
Air Force photograph by SSgt. Sean Martin

Bomber crews showcase take-off talents

https://www.youtube.com/watch?v=F_8qr7ojpWg&feature=player_embedded Air Force photograph by SSgt. Sean Martin A B-52H Stratofortress starts its engines during a Minimum Interval Takeoff on Barksdale Air Force Base, La., Au...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>