Business

August 23, 2013

ATK delivers backbone of NASA’s James Webb Space Telescope

atk-telescope
 

ATK has shipped the primary mirror backplane support structure for  NASA’s James Webb Space Telescope to Marshall Space Flight Center, completing an important milestone for the most powerful space telescope ever to be built.

The highly engineered PMBSS is the backbone of the telescope, supporting the telescope’s beryllium mirrors, instruments and other elements. It also holds the 18-segment, 21-foot-diameter primary mirror nearly motionless while the telescope is peering into deep space. ATK built the PMBSS on time and within budget at its facility in Magna, Utah, under a contract with prime contractor Northrop Grumman.

“With this shipment, ATK has fulfilled a critical milestone for the program,” said Scott Texter, Webb Optical Telescope Element manager for Northrop Grumman.

Measuring approximately 24 feet tall by 19.5 feet wide by more than 11 feet deep when fully deployed, and weighing only 2,180 pounds, the PMBSS supports the mission payload and instruments weighing more than three times its own weight. The folding design of the PMBSS enables the telescope to fit inside the 15-foot-diameter fairing of the launch vehicle.

ATK designed, engineered and constructed more than 10,000 parts of the PMBSS using lightweight graphite materials, state-of-the-art material sciences and advanced fabrication techniques. The composite parts attach in many cases to precision metallic fittings, made of precision materials such as invar and titanium that provide interfaces with other elements of the observatory.

“ATK has enjoyed teaming with NASA and Northrop Grumman on the Webb Telescope program,” said David Shanahan, vice president and general manager of ATK’s Space Components division. “We are proud to know that the technologies and inventions we developed to enable this NASA flagship mission will benefit science and engineering for generations to come.”

The PMBSS will also meet unprecedented thermal stability requirements to minimize thermal distortion. While the telescope is operating at a range of extremely cold temperatures, from -406 to -343 degrees Fahrenheit, the backplane must not vary more than 38 nanometers (approximately 1/1,000th the diameter of a human hair). For reference, if the mirror were enlarged to span from Los Angeles to New York City, the tolerance for error would be less than 1 inch.

Upon arrival at Marshall Space Flight Center, the PMBSS will undergo extreme cryogenic thermal testing. The PMBSS will then undergo structural static testing at Northrop Grumman’s facilities in Redondo Beach, Calif., in early 2014 before NASA and Northrop Grumman ready the observatory for its 2018 launch.

The James Webb Space Telescope is the world’s next-generation space observatory and successor to the Hubble Space Telescope. A joint project of NASA, the European Space Agency and the Canadian Space Agency, the Webb Telescope will observe the most distant objects in the universe, provide images of the first galaxies formed and see unexplored planets around distant stars.

 




All of this week's top headlines to your email every Friday.


 
 

 

Headlines April 24, 2015

News: More than $1 billion in U.S. emergency reconstruction aid goes missing in Afghanistan - A total of $1.3 billion that the Pentagon shipped to its force commanders in Afghanistan between 2004 and 2014 for the most critical reconstruction projects can’t be accounted for by the Defense Department, 60 percent of all such spending under an...
 
 

News Briefs April 24, 2015

German defense minister: widely used rifle has no future A widely used assault rifle has “no future” with the German military in its current form, Germany’s defense minister said April 22, escalating a dispute over the weapon’s alleged shortcomings. Ursula von der Leyen said last month that a study showed the G36 rifle has a...
 
 
Army photograph

Composites key to tougher, lighter armaments

Army photograph XM-360 test firing at Aberdeen Proving Ground, Md., in 2007, is shown. The Army is on the cusp of revolutionizing materials that go into armament construction, making for stronger, lighter and more durable weapo...
 

 

Northrop Grumman signs long-term agreement with Raytheon

Northrop Grumman has entered a long-term agreement with Raytheon to supply its LN-200 Inertial Measurement Unit for Raytheon optical targeting systems. The long-term agreement with Raytheon’s Space and Airborne Systems business extends through 2018. The LN-200 provides camera stabilization on optical targeting systems that conduct long-range surveillance and target acquisition for various...
 
 

NTTR supports first F-35B integration into USMC’s weapons school exercise

The Nevada Test and Training Range was part of history April 21, when four U.S. Marine Corps-assigned F-35B Lightning IIs participated in its first Marine Corps’ Final Exercise of the Weapons and Tactics Instructor course on the NTTR’s ranges. The Final Exercise, or FINEX, is the capstone event to the U.S. Marine Corps Marine Aviation...
 
 
AAR-Textron

AAR awarded new contract from Bell Helicopter Textron to support T64 engines

AAR announced April 22 that Bell Helicopter Textron Inc. awarded its Defense Systems & Logistics business unit a contract providing warehouse and logistics services in support of upgrading T64 engines for the Bell V-280 Val...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>