Business

August 23, 2013

ATK delivers backbone of NASA’s James Webb Space Telescope

atk-telescope
 

ATK has shipped the primary mirror backplane support structure for  NASA’s James Webb Space Telescope to Marshall Space Flight Center, completing an important milestone for the most powerful space telescope ever to be built.

The highly engineered PMBSS is the backbone of the telescope, supporting the telescope’s beryllium mirrors, instruments and other elements. It also holds the 18-segment, 21-foot-diameter primary mirror nearly motionless while the telescope is peering into deep space. ATK built the PMBSS on time and within budget at its facility in Magna, Utah, under a contract with prime contractor Northrop Grumman.

“With this shipment, ATK has fulfilled a critical milestone for the program,” said Scott Texter, Webb Optical Telescope Element manager for Northrop Grumman.

Measuring approximately 24 feet tall by 19.5 feet wide by more than 11 feet deep when fully deployed, and weighing only 2,180 pounds, the PMBSS supports the mission payload and instruments weighing more than three times its own weight. The folding design of the PMBSS enables the telescope to fit inside the 15-foot-diameter fairing of the launch vehicle.

ATK designed, engineered and constructed more than 10,000 parts of the PMBSS using lightweight graphite materials, state-of-the-art material sciences and advanced fabrication techniques. The composite parts attach in many cases to precision metallic fittings, made of precision materials such as invar and titanium that provide interfaces with other elements of the observatory.

“ATK has enjoyed teaming with NASA and Northrop Grumman on the Webb Telescope program,” said David Shanahan, vice president and general manager of ATK’s Space Components division. “We are proud to know that the technologies and inventions we developed to enable this NASA flagship mission will benefit science and engineering for generations to come.”

The PMBSS will also meet unprecedented thermal stability requirements to minimize thermal distortion. While the telescope is operating at a range of extremely cold temperatures, from -406 to -343 degrees Fahrenheit, the backplane must not vary more than 38 nanometers (approximately 1/1,000th the diameter of a human hair). For reference, if the mirror were enlarged to span from Los Angeles to New York City, the tolerance for error would be less than 1 inch.

Upon arrival at Marshall Space Flight Center, the PMBSS will undergo extreme cryogenic thermal testing. The PMBSS will then undergo structural static testing at Northrop Grumman’s facilities in Redondo Beach, Calif., in early 2014 before NASA and Northrop Grumman ready the observatory for its 2018 launch.

The James Webb Space Telescope is the world’s next-generation space observatory and successor to the Hubble Space Telescope. A joint project of NASA, the European Space Agency and the Canadian Space Agency, the Webb Telescope will observe the most distant objects in the universe, provide images of the first galaxies formed and see unexplored planets around distant stars.

 




All of this week's top headlines to your email every Friday.


 
 

 

Headlines April 18, 2014

Business: Lockheed to Lose 17 F-35s Under Automatic Pentagon Cuts - Pentagon will cut 17 of the 343 F-35 fighters it planned to buy from Lockheed Martin in fiscal 2016 through 2019 unless Congress repeals automatic budget cuts, according to a new Defense Department report. DOD looking for ways not to break MH-60R helo deal - The...
 
 

News Briefs April 18, 2013

U.S. military deaths in Afghanistan at 2,177 As of April 15, 2014, at least 2,177 members of the U.S. military had died in Afghanistan as a result of the U.S.-led invasion of Afghanistan in late 2001, according to an Associated Press count. At least 1,802 military service members have died in Afghanistan as a result...
 
 
LM-F35-hours

F-35 fleet surpasses 15,000 flying hours

The Lockheed Martin F-35 Lightning II fleet recently surpassed 15,000 flight hours, marking a major milestone for the program.  “Flying 15,000 hours itself demonstrates that the program is maturing, but what I think is e...
 

 
nasa-cassini

NASA Cassini images may reveal birth of new Saturn moon

NASA’s Cassini spacecraft has documented the formation of a small icy object within the rings of Saturn that may be a new moon, and may also provide clues to the formation of the planet’s known moons. Images taken w...
 
 

NASA completes LADEE mission with planned impact on Moon’s surface

Ground controllers at NASA’s Ames Research Center in Moffett Field, Calif., have confirmed that NASA’s Lunar Atmosphere and Dust Environment Explorer spacecraft impacted the surface of the moon, as planned, between 9:30 and 10:22 p.m., PDT, April 17. LADEE lacked fuel to maintain a long-term lunar orbit or continue science operations and was intentionally sent...
 
 
Photograph courtesy of NASA Ames/SETI Institute/JPL-Caltech

NASA’s Kepler telescope discovers first Earth-size planet in ‘habitable zone’

Photograph courtesy of NASA Ames/SETI Institute/JPL-Caltech Kepler-186f resides in the Kepler-186 system about 500 light-years from Earth in the constellation Cygnus. The system is also home to four inner planets, seen lined up...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>