September 20, 2013

Air Force Support for a Metamaterial Future

Metamaterials have been in the news lately – and not only in technical journals.

That is because the attributes of metamaterials are seemingly magical. When arranged just so, these extremely small manmade elements can alter the character of electromagnetic radiation in ways that no other material – either natural or manmade – can.

One such metamaterial characteristic which the popular press invariably plays up is the comparison to the stealth capability demonstrated by Harry Potter’s invisibility cloak. And yes, it has been shown that metamaterials can re-route light around objects, but the practical application of that attribute is many years hence, if it will ever come to pass. But much more significant, is the imminent transition of several metamaterial capabilities to the commercial world that will have meaningful and practical effects, to include less expensive satellite communications, thinner smartphones, ultrafast optical data processing, and much faster (and cheaper) internet connectivity on-board planes and from mobile phones.

The Air Force Office of Scientific Research, while looking forward to the day when metamaterials may be employed to make objects less visible, can take solace in the results of AFOSR support for early metamaterial researchers that made much of the current success possible.

It was in 2000 that AFOSR program manager Dr. Harold Weinstock was contacted by Dr. Shelly Schultz, an AFOSR-funded research professor at the University of California, San Diego, regarding significant advances in metamaterials based on theoretical work done in the 1990s by John Pendry of Imperial College, London. Pendry and his team theorized that an array of tiny copper wires and rings had a negative refractive index for microwaves – designed so that microwave radiation flowing towards the array was deflected in a direction opposite to what was normally observed. This triggered intense interest in metamaterials, admittedly in part, because the ability to bend radiation in such a way had the potential for creating invisibility cloaks. But there is much more to metamaterials than the hoped-for cloaking device.

Schultz and his team, which included senior post-doc David R. Smith, were responsible for the first laboratory demonstration of a metamaterial in 2000. Dr. Weinstock, impressed with the results of the UCSD effort, ultimately provided AFOSR funding to continue this research. Smith, as well as other AFOSR-supported metamaterials researchers, went on to explore new characteristics and applications of this remarkable laboratory material.

Smith, who is now at Duke University in Durham, N.C., has turned his attention to metamaterial commercialization efforts. A new company hopes to market a compact antenna that would be one of the first consumer-oriented products based on metamaterials. The relatively inexpensive device would carry broadband satellite communications to and from planes, trains, ships, cars and any other platform required to function in remote locations far from mobile networks. The key to its operation is a flat circuit board with thousands of electronic metamaterial elements which allows the antenna in the device to track a satellite without having to maintain a specific orientation towards it, the way a standard dish antenna does. The antenna’s position can remain constant, and the software will instantly adjust the electrical properties of each individual metamaterial element to optimize connectivity with the satellite–in both send and receive modes. Smith notes that this compact design offers “significant savings in terms of cost, weight and power draw.”

Another metamaterials innovation by Smith’s research group concerns a camera that can create compressed microwave images without a lens–or for that matter, any moving parts. This camera is of particular interest when applied to airport security, as it could significantly reduce the cost and complexity of the airport security scanning process, as it requires very little data storage to produce a detailed image of the scanned object, wherein the metamaterials elements can be fine-tuned to block, or permit, the reflected radiation for the subject being scanned. Although in its elementary stage of development, the ultimate goal would be to replace the current generation of big, slow and expensive airport scanners with thin, inexpensive metamaterials-based cameras whose images are quickly processed via computer. What makes this concept even more attractive is that security scanning would be quicker, less expensive, much less obtrusive, and capable of being placed throughout an airport or wherever security scanning is warranted.

Other aspects of metamaterials are being explored in different ways by three other AFOSR-funded researchers at different universities: Federico Capasso at Harvard University, Xiang Zhang, at the University of California, Berkeley, and Jennifer Dionne at Stanford University. Capasso, Zhang and Dionne, as well as David Smith, were all funded through an AFOSR Multidiciplinary Research Initiative beginning in 2004, and managed by AFOSR Program Officer, Dr. Gernot Pomrenke. This MURI effort was a key aspect in kick-starting many of the new avenues of discovery that are now starting the long path from the laboratory to commercialization.

Federico Capasso, who has been supported by AFOSR in several areas, including quantum cascade lasers, wavefront engineering, and designer plasmonics, unveiled a flat metamaterials lens in August 2012 that can focus infrared light to a point in much the same way as a glass lens. While stating that this was not a novel accomplishment, he says that his was “the first group to so clearly put flat optics on the agenda for commercial applications.”

Capasso notes that the commercial applications of these flat lenses are still a decade away. One direct application would be in smartphone cameras, as lenses are currently one of the limiting factors in determining a smartphone’s thickness. Capasso speculates that a smartphone with a flat camera lens could potentially be made “as thin as a credit card.”

There is still another problem to overcome: flat lenses have a diffraction limit just as for conventional glass lenses. This means that no conventional lens can resolve details much smaller than the wavelength of the light that illuminates its target. But metamaterials offer a solution to this conundrum; metamaterial superlenses, and hyperlenses could resolve details beyond the diffraction limit, and capture sub-wavelength details of target objects. This is accomplished by the metamaterials lens capturing what are termed “evanescent” waves of reflected light, that normally vanish soon after being reflected from the object they strike and therefore, cannot be captured by any conventional lens. But a metamaterial super/hyperlens can magnify and capture these light waves.

Just such a lens was demonstrated in 2005 by Dr. Xiang Zhang’s AFOSR-funded group at the University of California, Berkeley, and they have been working to refine the concept since that time. Their effort has concentrated on not only the capture of evanescent waves, but transferring them to a conventional optical system. As such, this process would allow hitherto unavailable evanescent light wave details to be transferred and viewed through the eyepiece of a standard microscope. Unfortunately, there are hurdles to overcome with regard to the complex structure of superlenses and hyperlenses, which makes them difficult to manufacture and use in this way.

Zhang is also looking at utilizing these lenses to construct nano-sized objects, as the lenses cannot only capture and direct sub-wavelength beams of light, but can also reverse the process and focus that light for the fabrication of nano-sized structures – such as smaller computer chips – using photolithography. But both Smith and Zhang note that there are drawbacks with this process compared to other advanced lithographic approaches, but the potential exists for ground-breaking applications.

AFOSR, which manages the basic research investment for the United States Air Force, continues to search out and support cutting edge science that promises revolutionary capabilities. Over the years, this funding has been judiciously applied to successfully advance the amazing attributes of metamaterials – making the theoretical, and seemingly magical, into innovative applications for the Air Force and society at large.

All of this week's top headlines to your email every Friday.



NASA picks top Earth data challenge ideas, opens call for climate apps

NASA has selected four ideas from the public for innovative uses of climate projections and Earth-observing satellite data. The agency also has announced a follow-on challenge with awards of $50,000 to build climate applications based on OpenNEX data on the Amazon cloud computing platform. Both challenges use the Open NASA Earth Exchange, or OpenNEX, a...

NASA’s flying laboratories study our world

Throughout the remainder of 2014, NASA is flying a series of airborne research campaigns from the North Pole to the South Pole and many points in between ñ to take a closer look at U.S. air quality, hurricanes in the Atlantic ...

NASA selects proposals to increase STEM education at community, technical colleges

NASA’s Office of Education will award more than $17.3 million through the National Space Grant and Fellowship Program to increase student and faculty engagement in science, technology, engineering and mathematics at community colleges and technical schools across the United States. Each award has a two-year performance period and a maximum value of $500,000. The 35...

Courtesy photograph

Space technology experiments tested in microgravity flight

Courtesy photograph University of Central Florida students and their principal investigator observe their experiment as it reacts to the microgravity environment on NASA’s C-9 reduced-gravity experiments aircraft. NASA...
NASA photograph by Tom Tschida

Seeing double: Experimental glider, rocket undergo fit checks

NASA photograph by Tom Tschida NASA intern Erik Rossi De La Fuente (upper left) admires the one-third scale, twin-fuselage sailplane concept demonstrator that will carry and launch the Whittinghill Aerospace Mini Sprite rocket....
Image courtesy of NASA/JPL/Corby Waste

NASA selects U.S. small business technology transfer projects for further development

Image courtesy of NASA/JPL/Corby Waste An artist’s rendition of the 2007 Phoenix Mars probe during landing depicts dust particles stirred up from thrusters. CFD Research Corporation, in conjunction with the University of ...


Be the first to comment!

Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>