Defense

September 20, 2013

Edwards T-38 aircrew prep for new ejection seat upgrade

Tags:
Jet Fabara
Edwards AFB, Calif.

Edwards is working to install new ejection seats in its T-38 fleet in order to increase the overall safety of the training aircraft.

For test pilots at Edwards, their long-time trainer airframe, the T-38 Talon, is receiving an upgrade that is set to ensure the safety of T-38 aircrew now and well into the future.

The upgraded ejection seat, known as the Martin-Baker Mk US16T, brings added safety features that were not previously available.

“We have an entirely new ejection seat system for the T-38,” said Maj. Jon Appelt, 370th Flight Test Squadron training officer. “The biggest benefit of this new seat is the expanded ejection envelope which increases aircrew survivability. This includes the ability to successfully eject in a zero airspeed and zero altitude situation as well as improving survivability in the high altitude and high airspeed regime.”

In addition to the zero-zero seat feature, Appelt mentioned the seat would include an inter-seat sequencing system, which allows one of the two aircrew members to start the ejection sequence for both aircrew members and sequences the ejections to avoid seat to seat interference.

“Potential seat to seat interference during the ejection process is a serious problem with the old system, and now with the new inter-seat sequencing system, the seats are automatically de-conflicted during the ejection, avoiding this problem,” added Appelt. “Once the center ejection handle is pulled, the aft seat will always eject first, followed by the front seat, which reduces the possibility of both aircrew members colliding in-flight.”

In conjunction with the inter-sequencing system is the seat’s leg restraint system, which provides two upper and lower leg garters attached to the aircrew member’s legs.

The new seat, the Mk US16T by Martin-Baker, will replace the old Northrop Grumman seat.

“This feature draws the pilot’s legs in and retains them in a position, clear of obstacles, until man-seat separation occurs,” said Master Sgt. David Buczynski, 412th Operations Support Squadron Aircrew Flight Equipment Quality Assurance. “The leg lines are connected to the inner pistons of the main beam assembly, which stays with the aircraft after ejection.”

Since the new seat incorporates a parachute system built into the seat just like the ACES II system on an F-16, Buczynski said the aircrew member will no longer have to carry a 50-pound, back-style parachute out to the aircraft.

“Added features of this ejection seat include the use of drogue chute stabilization, an automatic chute deployment, automatic man-seat separation and a manual override system, in the event of automatic and backup system failure,” added Appelt.

Although the new integration is ongoing, Appelt said aircrews will still be required to undergo the appropriate training before flying.

“Everybody flying in the new seat will be required to train on the new seat, which involves 30 to 45 minutes of ground training and about 30 minutes of training at the aircraft,” Appelt said. “Once the modular training seat system is available, aircrews will be able to use the system as a fundamental training device.”

The integration commenced in early July and, at this point, should end by mid-October, according to Appelt.

“Obviously, it will take a while to take all these T-38s through the modification process, but we’re near the tail-end of the mod process. There are contractors working at Vance Air Force Base, Calif., which allows us to mod one jet per week, but training has to be accomplished on both airframe ejection seats nonetheless,” said Appelt.




All of this week's top headlines to your email every Friday.


 
 

 

Dragon ‘fires up’ for flight

The Air Force and NATO are undergoing a cooperative development effort to upgrade the avionics and cockpit displays of AWACS aircraft belonging to the 552nd Air Control Wing at Tinker Air Force Base, Okla., and the NATO E-3 Sentrys from Geilenkirchen, Germany. The Diminishing Manufacturing Sources Replacement of Avionics for Global Operations and Navigation, otherwise...
 
 

AF to release small business research solicitations

The Air Force Small Business Innovation Research and Small Business Technology Transfer program office is set to release its fiscal year 2015 list of topics Oct. 22, on the SBIR/STTR website.  Small businesses and research institutions with expertise to address the topics’ technology challenges are encouraged to submit proposals. During 2014, the Defense Department SBIR...
 
 
Navy photograph by POC Sam Shavers

Navy christens, launches future USS Detroit

Navy photograph by POC Sam Shavers Ship’s sponsor Barbara Levin breaks a bottle of champagne across the bow during the christening ceremony for the littoral combat ship Pre-Commissioning Unit (PCU) Detroit (LCS 7) at Mari...
 

 
Army photograph by David Vergun

Shyu: Army modernization entering ‘death spiral’

Army photograph by David Vergun Heidi Shyu, assistant secretary of the Army for Acquisition, Logistics and Technology, visits industry reps at the annual meeting of the Association of the United States Army after speaking on a ...
 
 
Navy photograph

U.S. Navy’s E-2D Advanced Hawkeye aircraft achieves IO

Navy photograph The U.S. Navy announced that the E-2D Advanced Hawkeye achieved Initial Operational Capability Oct. 10. IOC signifies that the first operational squadron, Carrier Airborne Early Warning Squadron (VAW) 125, is ma...
 
 
Navy photograph by PO2 Tim D. Godbee

USS Coronado conducts dynamic interface testing with Fire Scout

Navy photograph by PO2 Tim D. Godbee An MQ-8B Fire Scout unmanned helicopter assigned to Helicopter Maritime Strike Squadron (HSM) 35 prepares to land on the littoral combat ship USS Freedom (LCS 1) during visit, board, search ...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>