Defense

October 21, 2013

Wing surpasses 2,000 sled test missions

The graphic displays a sled-propelled warhead just before it penetrates the target, midway through the target and exiting the target. Eglin’s sled track is part of the 96th Test Wing’s Kinetic Energy Munitions Test Facility at the Eglin Test and Training Complex Test Area C-74. The KEMTF at ETTC has been in operation since 1956 and reached 1,000 sled test missions in September 1978. The unit surpasses 2,000 test shots this summer.

 

The 96th Test Wing at Eglin Air Force Base, Fla., recently reached a historic testing milestone this summer. The 2,000th sled test mission was conducted at the 96th TW’s Kinetic Energy Munitions Test Facility at the Eglin Test and Training Complex Test Area C-74.

The 2,000th test was conducted in support of fuze development for the Air Force Life Cycle Management Center Hard Target Void Sensing Fuze program. The purpose of this series of sled tests was to demonstrate performance and shock survivability of the fuze during simulated target environments at both ambient and cold temperatures when installed in two different warheads.

“This 2,000th sled test event is a significant historical event for the wing and the 96th Range Group. Our team takes great pride in knowing their scientific and engineering contributions have a key role in continuing many years of consistent, successful test support,” said Jeri Ghosh, the 96th Range Group technical director.

The team consists of the 96th Range Support Squadron and the Eglin Test and Training Complex Operations and Maintenance Contractor, InDyne. The 96RANSS provides the technical, scientific and engineering support to create and accomplish a sled test event and the KEMTF is operated and maintained by InDyne.

The variety of testing that can be conducted at the KEMTF includes penetration tests, warhead survivability, fuze function, aeroballistics, simulated loft dispersion, transportation container evaluation, and simulated captive flight test of systems.

“KEMTF sled testing plays a critical role in the Air Force test process and directly supports the Armament Directorate’s charter to equip our warfighters with effective strike weapons,” said Robbie Thomas, the sled track instrumentation systems engineer. “It is a cost effective ground test capability proven to be a valuable asset to the Air Force and the weapons test process.”

The KEMTF mission is to offer test customers the ability to test inert and live, fuzed munitions against a variety of targets at operational velocities (up to 3,000 feet per second).

“Testing conducted at the KEMTF produces incredibly high quality video and more importantly it produces decision quality engineering data for weapons developers,” said Thomas. The Range Systems Flight provides range instrumentation and data acquisition systems design to capture test data.

The frequency of sled tests is driven directly by a weapon’s development schedule and test requirements. Many tests have complex target setups and often the test item requires environmental conditioning.

A warhead sits ready to launch prior to the 2,000th sled test shot earlier this year at Eglin Air Force Base, Fla. Eglin’s sled track is part of the 96th Test Wing’s Kinetic Energy Munitions Test Facility at the Eglin Test and Training Complex Test Area C-74. The KEMTF at ETTC has been in operation since 1956 and reached 1,000 sled test missions in September 1978. The unit surpasses 2,000 test shots this summer.

“On average we shoot one to two shots per month,” said Thomas.

Since 2010, more than 40 test shots were conducted with two more scheduled in 2013.

The targets those test shots are aimed at can be as large as 22 feet high by 22 feet wide, four feet thick and weigh as much as 160 tons. The Targets Flight provides the professional engineering design and fabrication of the target structures.

“We take great care during the design and build up of the targets, all in accordance with our customers’ requirements,” said Robin Peacock, P.E., the Targets Flight chief.

Once the design is complete, the monstrous targets are constructed at KEMTF’s on-site concrete casting yard. Building a large scale target can take up to a week to cast, and about 28 days to cure based on the specific design criteria and materials.

To move the target into place, a 230-ton crane and hauler transport and place the targets at precise locations at the end of the track to achieve accurate angle-of-attack impacts required for warhead testing. It can take up to 10 days to place the target depending on the complexity of the target design and layout.

The Targets Flight not only creates and places the target, it also provides engineering design for the buildup of the pusher and carrier sleds. It is also involved in the technical design of the combination of rocket motors to propel warheads down sled track at a terminal velocity of up to 3,000 feet per second.

“By design, we are able to engineer and produce accurate delivery of a warhead on target within five degrees angle of attack, which offers an unprecedented high degree of repeatability and reliability,” said Michael Nagel, the sled test design engineer.

The KEMTF at ETTC has been in operation since 1956 and reached 1,000 sled test missions in September 1978.

“The KEMTF’s success is due to the wealth of knowledge, expertise and many years of test experience within the 96th TW,” said Thomas.




All of this week's top headlines to your email every Friday.


 
 

 

Headlines January 23, 2015

News: Yemen chaos threatens U.S. counterterror efforts, including drone program - The White House’s strategy for fighting al-Qaeda in Yemen – repeatedly presented as a model by President Obama – was left in tatters Thursday by the resignation of the man who personally approved U.S. drone strikes in the country and the collapse of its central...
 
 

News Briefs January 23, 2015

NATO detects key Russian military equipment in east Ukraine NATO’s top commander in Europe says the alliance has detected the presence of key Russian military equipment in eastern Ukraine that, in the past, has accompanied large inflows of Russian troops. Gen. Philip Breedlove told a news conference Jan. 22 in Brussels that Russian electronic warfare...
 
 
Boeing photograph

Boeing Maritime Surveillance Aircraft ready for demonstration flights

Boeing photograph The Boeing Maritime Surveillance Aircraft program is ready for customer demonstration flights, having completed the baseline ground and flight testing of the aircraft mission systems. The Boeing Maritime Surve...
 

 
Air Force photograph by Jacqueline Cowan

F135 test demonstrates success of AEDC workshare initiative

Air Force photograph by Jacqueline Cowan Aerospace Testing Alliance Test Engineer Darren Carroll, pictured in front, assists as Pratt & Whitney Test Engineer Ronnie Thomas does a borescope inspection of the fan on the F135 ...
 
 
U.S. Air Force photo by Master Sgt. Kevin J. Gruenwald

40 years of Red Flag at Nellis

U.S. Air Force photo by Master Sgt. Kevin J. Gruenwald A flight of F-15 Eagles and F-16 Fighting Falcons Aggressors fly in formation over the Nevada Test and Training Ranges June 5, 2008. The proposal for Red Flag came in early...
 
 
Lockheed Martin photograph

Navy gears up to order production of 29 aircraft diagnostic systems

Lockheed Martin photograph Petty Officers Third Class Ira Schwartz assigned to Fleet Readiness Center Southeast at Naval Air Station Jacksonville, Fla., left, and Devin Riley from Fleet Readiness Center Mid-Atlantic at Naval Ai...
 




0 Comments


Be the first to comment!


Leave a Reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>